วีดีโอ

It is running with the default inav tuning.

Where is this tpu supposed to be mounted at? And where do you get this tpu from?

@fpvinprogress The parts are included. they are not described in the operating instructions. These are two parts that go over the screws in the area where the capacitor sits and have notches for the capacitor wires.

LEDs are decorative on the drone, some people like others don’t, it’s a preference. The voltage drained by LEDs is barely noticeable in the total of a flight time

The throttle stick has to be at 0 for the drone to keep its altitude hold, if it is just above zero the drone apparently descent, if you move pitch and roll you can automatically fly it in angle mode and as soon as pitch and roll go back to the center position, the drone will automatically be in altitude hold. More info here: github.com/betaflight/betaflight/pull/13975?fbclid=IwZXh0bgNhZW0CMTEAAR3kjZQ0awX-p_btsWGU18dmuvS5N4Q7aFiE84Abgz3NXuXo2cOrcRI6_G8_aem_E2yIOZin6pijIiRbxUGLww

My pleasure mate, thanks for watching and happy you find it useful for yourself 🔥

No it is not held via angle mode, the betaflight 4.6 comes with this feature. This short video has a link to my full video tutorial on how to set it up. Anyway I leave the link here to the tutorial for an easy reach to it: th-cam.com/video/WG-YC503Kaw/w-d-xo.htmlsi=fi10GFGbyS24dH9v

Thank you. And daam I am really waiting for this update now. Being a newbie this will be really helpful.

@@o0Adx0o my pleasure mate. Yeah it’s nice to see that betaflight is also moving towards the gps assistant flight like the position hold. This features have been mainly developed by inav and ardupilot. Inav still the best for the gps assistent flight like position hold, gps rescue, cruise mode and waypoint, but it sucks about pid tuning and filtering the drone where betaflight is the best at

@@fpvinprogress How amazing would it be if we start getting features from inav and ardupilot in betaflight...That would really step up the betaflight based fpv game ...

@@o0Adx0o yep that’s right, that’s why I am excited about this feature, I feel that it is the first step towards it

Work in progress!! Thanks a lot for subscribing

Speedybee f405 mini

Thanks mate. I am really sorry but I have no idea about that

It kinda of is though. INAV and Ardupilot fly terribly compared to Betaflight.

Yes true even inav has it since long

I find easier to tune a quad on betaflight rather than on inav

@@Gowieee Yeh, I switched to Inav a few weeks ago and my Flywoo explorer did not fly as well as it did in Betaflight.

@@jcmusix1for pid tuning and filtering betaflight is the best

I am happy to hear that mate As I said in the video, I was unable to calibrate the compass properly in the setup page and I believe that’s the reason of my outcome. At that moment I didn’t think to calibrate it using stick command, so I am gonna do that and test again and to a follow up video

You are right I honestly didn’t take that in consideration, too used to use the app!!

Thanks a lot mate🔥

Thanks a lot brotha🔥🔥

Thanks a lot really appreciated 🔥🔥

Thanks a lot, can’t wait to get the stable release of betaflight 4.6

Thanks a lot brotha🔥 have you already tested the new 4.6?

Thanks a lot. Yeah mate, knowing how to tune your drone comes always handy and helpful especially when it is a DIY. If you get badly prop wash, your drone requires a tuning. Follow my video when approaching the tuning and follow the steps shown. A couple of tips: 1 when tuning, use the batteries you are mainly planning to fly the drone with, and make sure that when the battery you are using for tuning reaches 3.8/3.7 v per cell, you change with a new fully charged one otherwise the low voltage gives less power to the drone resulting in a not accurate tuning. 2 if you are planning to carry a GoPro or any action cameras on your drone, mount it on while you tune your drone so that the tuning is in accordance with the real total weight of the drone if you know what I mean.

My pleasure, thanks to you too🔥

Thanks a lot man, I really enjoyed flying it🚀🚀

I run it on 6s 1300mah with the F405 mini and so far the esc is working great the only difference is that I use 1700kv motors. Anyway for your higher kv motors you needed a more capable esc.🔥🔥 Happy flying to you too amigo🚀🚀

@fpvinprogress I think you're right. The motors I was using when I was killing ESCs were 3200kv. I mistakenly ordered them instead of the 2300kv. They were in specifications for 6s application, but I really think that motor was too high kv for the mini stack on 6s. Hopefully, the 2300kv motors with 60 amp ESC will be the right combination 👌. So far, so good. Have a great week, amigo. 🫡 🍻

Yep bro you should be good to go now with the esc. Happy flying to you too my friend and thanks for watching my videos🔥🔥

@fpvinprogress 🤠👍

@ 🚀🚀🔥

No GoPro on, the video is out of the 03 air unit. I use 1700kv motors and they are not suitable to carry a GoPro as well. I’ll try the Runcam 5 on and see how it goes

I love the way the drone flies, location and the video looks interesting thanks to the low proximity flight🔥🔥 well done

@ thanks a lot, I really enjoyed flying the drone close to that rocks, risky but all worth it🔥🔥

That’s my pleasure mate, happy to give my contribution back to the fpv community 🔥 Soon I’ll upload the maiden flight of the bee 35. Flew it over a landslide🔥

@@fpvinprogress ready buddy, keep up the spirit and always be healthy

Thanks a lot mate, be healthy too and happy flying. Greetings from Australia

Here you are mate: th-cam.com/video/_d_zM9oZWqE/w-d-xo.htmlsi=axZvILybAPcg6jPg

Yes the view from up there is sensational 🤩

@@fpvinprogressstunning place, it looks like paradise ❤️

@ yes it is a paradise ❤️❤️

Thanks a lot🔥🔥🔥

Thanks mate🔥🔥 happy with the outcome🚀

Thanks mate🔥

Very satisfied about this drone mate. Great machine fly especially in tight areas 🔥🔥 I suggest it

You are right prof😉😎

@@fpvinprogress joke?

@@CKAM_HA_GOlDY joking mate. But of course you are right, it is a tinywhoop

Yes I have been editing it, just didn’t have enough time to work on it recently, but it will be out this coming week for sure🔥

Hey mate, the next part is now published, here is the link: th-cam.com/video/wvuQIUko1r8/w-d-xo.htmlsi=41zq90D9j7OtltRW

Around 780AU$

Yes man🎊🎊

@fpvinprogress What kind of motors are used in fpv?

@@alexmalighin7723 it depends on the size of the drone, for the bee35 I used the motors 2004 in size with 1750kv of power for 6s battery. Usually smaller drone use a higher kv, and bigger drone like 7” use lower kv such as 1250/1300kv

That’s about 500g

That’s fantastic mate🔥 I am happy that my video is helpful to somebody. Enjoy flying now🔥

I wouldn’t recommend doing it so, different motor’s kv requires different tuning in order for the drone to fly properly, otherwise something can go wrong. Follow the tutorial but apply settings based on the performance of your drone

In mid air?😂 that could be an idea!!

@@fpvinprogress yup

Yeah it works perfectly and it locks satellites quickly too. Nice piece of technology

Thanks a lot brotha🔥

@@fpvinprogress mano vc tem o speedyBee Mário 8

No bro I don’t own the mario 8, what about you?

@@fpvinprogress montei um essa semana mano

That’s nice bro, I really like that frame and the overall look of it🔥🔥 Are you gonna make a video about it?

I am sorry to hear that mate. What I show in the video is related to the crossfire rx, not ELRS. However if you have chosen the preset at 50Hz for ELRS, your rx should get a great range but apparently it doesn’t and for what I have read online many others have encountered the same issue. To overcome this problem, firstly make sure that both rx and tx are at the exact firmware version, exactly the same. Then if the rx’s antennas are too close to the frame, move them a bit far and also if in the place where you fly there are other wifi’s it might affect the performance of your rx. Another thing you can do is to upload the preset at 150hz and set your tx at 150hz as well and see if your rx gets a better ferforms. I had a look on some forums for you and this one might help: github.com/ExpressLRS/ExpressLRS/issues/1094 Keep me informed on how you go mate, happy to help you out🔥

Thanks a lot brotha🔥

@@fpvinprogress olá mano eu só consegui colocar as LED só de um lado acabei perdendo o seguimento

Sorry bro, what do you mean? What did you lose?

It has been my first time too bro, very similar to betaflight, so can’t get lost that much. In addition in inav there is that you need to be sure to calibrate the compass properly, helping you by using the compass on your phone as I showed in the video 🔥

@@fpvinprogress ok meu amigo vou tentar fazer olhando pra seu vídeo

Give a try bro. Just make sure to do a backup of betaflight configuration before to proceed to inav so that if you want to go back to betaflight it’s easier and safer, and take note of what version of betaflight you are running on your fc

Thanks mate🔥

I’ve used up to 1850mah and got around 9/10mins flight time cruising around

@@fpvinprogress Oh man… is that 6s istn it? How many C? I am building my first Mario and I thought that 1300 mAh 6s 100C is enough… Maybe I should change plans about battery 😅hahah

@@RCkomar you can also fly it with the 1300mah battery, I also do since I have got 4 of the 1300 and only 1 of 1850. Obviously using the 1300mah get less flight time but since the drone is less heavy it flies better

Thanks a lot my friend🔥

Hi mate, I had a few flight test and can say that the gps signal is rock solid, no interference at all even when flying forward