วีดีโอ

Do the lights work?

*Yewwh!* 🤙🏽⚡️🤟🏽🤙🏽👌🏽

very detailed test!

great project! Suggestions, put some chain guard to protects your foot and leg!

That's cool

Where did you get the iron frame

Is It possible to weather-proof this for the outdoors?

When all the led light turns green does that mean it is balance?

Where is the temp switch supposed to be mounted on the pack or on the bms itself?

How to boatload a bricked unit. Does the power switch GND the SMT32 for ready state?

How did you get rid of error 11?

I would love to do this with my teenage daughter but I do not know where to buy everything! Do you have any links you can share? Thank you for the video very cool!

Hello, I'm in the middle of a vesc pint build using the same maxkgo BMS, just wondering if you ever got the BMS to shut off charging itself? My setup with he same BMS and battery never gets to 4.25 per cell it sits at 4.22 per cell max and never balances back to 4.20 unless I manually unplug the charger, is your pint charger and battery doing the same with the maxkgo BMS?

Im thinking of buying your product, i have 36s lifepo4 battery pack 20kw used for an EV, split into modules

Could you not have come up with your own design rather than cloning the ZBMS?

how’s life?-you uploaded gorgeous footage!take it easy!:))

Hello, How can I differentiate a ws2812 led strip from the ws2812b?

Hola, qué controlador bluetooth es compatible con el WS2813?

Good idea to put tape over the battery + - while working over it... lots of metal to drop

hi

If this is a 30S battery why did you set parallel to 10?

How did you get rid of error 11?

I need a dbc-file for CAN-BUS. Or an ID-description for signals (Cells Voltage, Temperature LTC, Current, SOC, ect.) Can you help me?

whether you can use our CHINA UDAN BMS

‼In the parameter setting interface at 3:39 of the video, please note that you need to select the "VESC" option in the "Emit status protocol" column

is this a good bms for electric vehicles?

Do you really need to disconnect the ESC before charging? Once all the electronics are installed on a project it can be rather difficult to get to the wiring for dissconnection.

does it communicate with the new Flipsky 200A FSESC 75200 ?

does it support regenerative breaking?

LED controller?

Nice PCB, but are these cables really soldered and not crimped? I'd not dare to use this for any significant currents...

Great video

Will this communicate with a solar inverter?

Hi. Thanks for sharing this test. Can i ask you how well this motor is sealed. How waterproof is it? Long lasting? Thanks

Sir magkano po ninyo ito binebenta at ano po pangalan Ng shop po ninyo?

So nice! When can we see these display modes on the ESK8 nelf version?

What is the application used for WS2812B for IOS

Ah

Where is the temperature sensors installed?

أرغب فى شراء المنتج

خیلی خوب بود

Great video and install instructions! I'm planning on putting a coat of epoxy over my LEDs once I install it around the rim. I'm hoping that will add more protection and keep it secured.

Hi...new subcriber...what is the of that spot welding...thank you

We had a FSESC 75200, but never worked for us. Even when detecting the motor (the flipsky 65161 120kV version), it sounded like a 2 stoke motor when doing the testing. The detection results looked way off too. It was telling me that the motor current was 400 amps. Later I was told that a batch of the 75200 had a wrong resistor, causing it to not work as should. I ordered this VESC from Flipsy last summer, and needles to say that no way in hell they would exchange this "wrong" version with a new one.

Does this have a timer function? And can you target specific LEDs/pixels or ranges of pixels ("individually addressable"), and make them do things (solid color, blink, etc.) at specific times? If not, do you have another product which does have that kind of function?

Trash vid, no audio of motor

anyway to get this connected to a razer chroma rgb controller for ambient lighting?

What type of stuffing did you use? Mine keeps falling off

EASY TO PROGRAM: th-cam.com/video/J8h_WenkbyQ/w-d-xo.html

Is it magnetic to hold the screws?