วีดีโอ

Thank you from Israel 😁

thank you very much! i can fix my coffee machine now!!!

This helped me fix my frother (spring way out of place). Thank you very much!

Thanks Dave. I have the same issue. What is the Philips screwdriver size? I just don’t have something that fits right now.

Thank you very much for share this video, from me like and subscribe+ *+ **+* * *+* +* ** ****

Hi what is the part number of the replacement part. ?

Thank you for your wonderfull video I have the same problem only mine it is less than 6 month old machine, it has occasional leack issues but the worst is it never puncture the cartridges of coffee which always cause the coffee to leak in the tray and the cup of coffee fills with water more than coffee ! I tried to follow your steps on your other video ( cleaning the plate with tooth brush to get out any coffee deposits that could be blocking the holes in side that plate but I got no improvements , I used deblocking cartridges that has inside descaling products instead of coffee but that didn’t work either .. I want to open and try to clean the plate but I wonder if after removing this plastic cylinder would I be able to have access to the plate to have look at it ? Thank you

Brilliant video thanks - spare part cost £45 and saved me having to spend £350 on a new machine.

Danke... Gruß aus Österreich 👍

Thanks Dave! The new part works great. No more leaks! 😊 I believe the original part went bad when my visiting relative manhandled the lever when the pod bay was full. Instead of emptying the used pods he forced the lever down which most likely bent an internal part and prevented it from sealing properly. The new part arrived in a couple days and I followed your instructions. I am happy to report my Nespresso machine is back to work again making my morning coffee. Thanks for the help!

My printer looks just like this one. I was able to replace the left hinge but can't get the right side one out. Any suggestions?

hey i was looking for something else about this machine but and maybe can you help me . i have a big problem with the descaling boutton because this one dont wanna tourn off and i already did everything to try to fix it maybe you have some answers to fix this problem thx a lot

Thanks for your video, you're the best! GRAZIE!

Thanks so much for your video instruction! I replace the hinges, and now I can use the auto feeder again. I could not find a aluminum piece, so used a piece of sturdy plastic from a packaging instead. It's not as smooth as aluminum, but worked. Thanks again!

Thanks from Thailand Dave, The replacement wasn't bad at all because of your video. The only problem is that the new hinges make a horrible loud creaking sound when the cover is opened now, I tried using a penetrating oil on them, as much as I dared anyway, but it didn't help. Any ideas? The new hinges were from Samsung.

Thank you you have solved how to fix my water leaking problem 😊

The areator area and one of the springs were dirty. Cleaned them up and the Coffee machine works like new. Thank You Sir :-)

Olá, fiz exatamente como explicado no video e funcionou na perfeição. Obrigado pelo video, tempo despendido a gravar e editar.

Thank you! This was very helpful! Greetings from Brazil!!

Thank you Dave. I had the new hinges sitting on the desk for 6+ months. Your video made the replacement so simple for me. Love from Canada 🇨🇦

Yo it work!!!!! Thank you!!!!!

Thanks for a great video. I had a different problem and couldn't work out how to get into my machine before I watched this. All I did was follow your instructions until you removed the top and pulled the little plug. I then plugged it back in and it reset my machine and it's working again. Thanks

Thanks Dave! Well explained and well filmed. You’ve saved my machine from the landfill and many dollars from my pocket!

Thank you so much for this video! Wanted to keep ewaste out of the landfill and so glad I found your video! I used a piece of plastic from a plastic blister pack instead of the aluminum can to help slide out the hinge.

I still got steam and little water with no milk

Great video Dave. Managed to fix and i now have the perfect coffee

Worked great! Thanks!

Thanks for the helpful video. Could you please tell me what kind of screw driver you used?

Дякую

This was very helpful. Thank you!

Thanks bro You save my morning cafe ☕️

Thanks so much..very helpful

Great detailed video just fix mine now 👍🏻

Brilliant video, thanks. You helped me fix my machine; I had a similar fault.

Thanks so much Dave! It worked for us and we are now so happy to have good coffee without the water loss!

Thank you! Now I can enjoy some lattes again

Where did you buy the infuser?

Good on you, Dave. Just done mine. Works a treat. No leaks! Many thanks!

This is a great video Dave. This seems to be a common problem with the Nespresso machine, well for me at least. I had the infuser fail on our previous machine the EN720 and now on our current machine EN650B. I looked high and low for a manual and couldn't find anything relating to this machine, (the milk frother was playing up a couple of weeks ago and it didn't seem to be a common problem). Then I stumbled across this video which is a great help. Thanks.

Dankeschön

Thank you this worked :)

Thank You, helps me very much. All the best from Germany.

Super

Didn’t work for me

Thanks for the video but doesn't solve the problem at all. The real issue is the frothing regulator. It sits on a piece of rubber which becomes perished over time. I tried all the tricks but was only able to fix this by replacing the milk jug unit. Plugged a new one in and works perfectly now.

Legend! Thank you. I can't believe instructions equivalent to this aren't included with the machine! I've struggled with a number of Nespresso Lattisima machines over the years. Wish I'd seen this a long time ago. FYI I used citric acid (from Mckenzie's powder), which I like as an compact, cheap, non-flavoured source of mild acid.

Thank You. Helped a lot. Especialliy removing the old parts out of the holes.

Thank you so much🌸

Hi David. I have been see this viedo a lot of time now. I just have to thank you with great gratitude for your video guide on how to clean. You have learned many important steps and points for this cleaning. However, I myself had a great urge for further investigation because what actually happens when the milk frother mechanism breaks down? I took out my micro tube camera and went further into the channel for rubber with springs and balls. Here I was surprised when I discovered that inside the tube, where milk passes through vibrations and foam is made, there are 3 tiny plastic protrusions. Despite cleaning, the 3 spouts were covered with thick protein waste, belonging to the milk. I paid a visit to the garage and drove on with compressed air made of high thickness, in these two pipe channels that produce skimmed milk. And believe it or not, this was a wonderful cleaning! This took the whole cake, an even bigger layer of milk foam was the result. Thank you for your generous donation for the cleaning, it is with me from now on complete. Take care!

Thank you so much,