Hi, thank you. Yes some needs stippling because factory will be worn out faster than stippling and especially if you are doing outdoor shooting. Some might not need to if they are not really into shooting.
If you are fat yes it will 😂 but those textures are not made for EDC AIWB/IWB, you gotta pick right for the purpose. Side panels are not aggressive though.
I’d get. The 43x mos for the slick slide finish and carry IWB in barsony holster. Usually carry shield 2.0 or Plus but the frame finish is pretty rough and pulls holster out. Haha. Good job though for sure
It says stippled G19 😂😂😂😂. We did the stippling so it is considered as stippling. If you are looking for the process on how to stipple look at other videos.
When you were starting off wth the lines at first I was oh cool is gonna be decent with good texturing and then you showed finish product and I was like WTF. Was not expecting it to come out that Clean, that is amazing!
Seems the boarders are what consumes the time, the stipple pattern is tedious but simple… well done, very clean. Just picked up the Echelon and didn’t consider changing the grip texture, but now? 🤔
would have bought a Wilson Combat 320 grip frame for 60.00 before allowing an expensive stippling job. I am guessing stippling, due to the labor would cost 150.00 on up ? -Best of luck.
Why?
simply because doesn’t have enough grip
i dont know that it is needed, but your work does look good.
Hi, thank you. Yes some needs stippling because factory will be worn out faster than stippling and especially if you are doing outdoor shooting. Some might not need to if they are not really into shooting.
I'm always doing well in Korea too! If you don't mind, I'd like to see the shape of the tip.ㅠㅠ
That should sand an inch off my belly fat on my EDC.
If you are fat yes it will 😂 but those textures are not made for EDC AIWB/IWB, you gotta pick right for the purpose. Side panels are not aggressive though.
What tip are you using? Fantastic work!!
I’d get. The 43x mos for the slick slide finish and carry IWB in barsony holster. Usually carry shield 2.0 or Plus but the frame finish is pretty rough and pulls holster out. Haha. Good job though for sure
Thats a really nice glock bro.
thank you
You’re a bad ass bro! Looks 🔥
Now I see why there’s no likes Haha 😂 so to clarify, you reassembled a Glock 19 🤷♂️ this had NOTHING To do with stippling Lol good luck guy haha 😂
It says stippled G19 😂😂😂😂. We did the stippling so it is considered as stippling. If you are looking for the process on how to stipple look at other videos.
Josh are you actually this fucking dumb? It says stippled Glock 19
I don’t understand why anyone would get the echelon stippled . Nice work though !
Because factory won’t last and for some not yet grippy. Personal preference. Thank you!
NICE work man! Really sharp..
I would definitely have to be high to tolerate the tedium of doing that! Nice job…😂
wow!
Oh I’ve been to your website was looking for dragon scale exclusively, I’ll revisit thanks so much!
Fire 🔥 I’ll be in touch you can count on that! Do you do dragons 🐉 scale?
Hi, yes we do have a scale texture, you can visit our website or fb page for more jnfo.
The echelon already have good grip. Now it just look like a glock. But good work.
Some may look a good grip on it but in time it will worn out, some people want it more aggressive. It’s basically personal preference. Thank You!
The front and back is it a random drag? I want THIS exactly! Sprinkles and what I would call like brain ish pattern on the front and back
What did you use for the front and back strap area?
Superb job 👏 🔥
When you were starting off wth the lines at first I was oh cool is gonna be decent with good texturing and then you showed finish product and I was like WTF. Was not expecting it to come out that Clean, that is amazing!
The outlines look a lot better when done with a small wood carving u-shaped gouge…
Maybe, you can follow the page and see the borders look like now. Thank You!
@@srbcustomsllc maybe after you high grit sand and polish
@@srbcustomsllc are you saying you use a U-gouge now ?
@@TheNotYetProSkaters no I don’t use it but I can show you the difference.
What tip did you use on your wood burning tool
Keep it up buddy
You make that look easy
Nice and clean. Great job.
Sickkk🔥🔥
Nice work, love that texture
thank you
Looks nice however what's the purpose of sanding down when your stippling over the area
Awesome. What pattern or tip is that?
that’s a custom
@@srbcustomsllc looks great.
Nice job, how long did it take you?
with same modifications 6 hours minimum..
Seems the boarders are what consumes the time, the stipple pattern is tedious but simple… well done, very clean. Just picked up the Echelon and didn’t consider changing the grip texture, but now? 🤔
@@charles90407I do deep recessed borders that’s why you wont see any melted polymer on the edge. It is simple but really takes time. Just do it 😃
@@srbcustomsllc awesome work… not easy, but you nailed it👊🏼
would have bought a Wilson Combat 320 grip frame for 60.00 before allowing an expensive stippling job. I am guessing stippling, due to the labor would cost 150.00 on up ? -Best of luck.
Awesome work as usual
💪🏽💪🏽💪🏽🔥🔥💯💯
What is the purpose of grinding down the bottom of the trigger guard?
..tactile, familiar finger/hand-hold placement.
VERY nice!!!!!
Thanks!!
Great video. You did a great job as a teacher, really good instructions and tips. 👊
What tip is that? Can we get a shot at what it looks like?
That's some seriously shitty music.
Amazing!
What’s the turnaround time if I were to send in my frame?
Nvmd just checked the website.
okay! great. just let us know if you have any questions.
Very nice. What tip was that?
What type of tip is that
What solder iron is that?
What did you use to polish the undercut so well?
What are you using to do the lines?
The reason i’m following cuz the music part 🤣 can i get the name of it please? It sound strong af
lol! all good man.. it’s Rhapsody Battle of Heart..
@@srbcustomsllc thanks bro. Did you use the chisel to make the line first or you just use the woodburner and run it as you marked it? 😅
@@mr.glickems5103 none of those you mentioned. The one that you can see on the video is the one I use..
@@srbcustomsllc my bad , i saw it now. Great stippling bro. You got some handy hands 👍👍👍
So cool
What are you using for polish
just sandpaper
@Big TH-camr01 I don’t use any or wet sanding. You don’t need it.
@@srbcustomsllc buffing wheel for polish sand paper for your knock down
Looks great. Have you ever made your own tips like battlecock does
90% of the tips are custom made, usually stipplers does that.
Why do people sand it if they’re just going to melt it?
it’s not gonna melt the same and if you don’t the color is not gonna be black..always have to clean it.