วีดีโอ

@@iman80skid91 Thank you for your comment 👍🏻DG

Why? Do you mind i asking.

@@heron9524 not performance for most expencive price.

That's good to hear! 👍🏻 DG

?? care to expand on this?

@@michaeltrager4381 Thanks for your comment, yes I hope the T26SZ arrives in the USA 🇺🇲 soon. Very pleased with my set and like you, have had the T18 for a similar amount of time - been a great transmitter and will still use it alongside the T26SZ. DG👍🏻

@@VipiModel-nk3ce Thanks for your comment 🇪🇸, great to hear you have a good selection of Futaba transmitters. Flew mine yesterday and found the top screen useful so guess it's an individual thing. Guessing a lot of pilots are on FASSTest and protocols other than FASST, but yes can understand what you mean👍🏻. Best wishes, DG 🇬🇧

No FASST no sale !!!!

From what i believe. The fasst protocol does not meet EU requirements any longer. Something to do with EU regulations changing in the last few years. So i think Futaba had no choice but to drop the Fasst protocol.

Thanks for the comment 👍🏻

Thanks Ally! Thought I'd document it a little bit. Yeah it's still freezing up here, more like winter flying all over again! Yes, she's flying a good sequence now and would be good to get a flying video if poss. All the best 👍

Nice one👍🏻 good luck with your new plane and thanks for commenting, DG

Thank you for the comment, yes very true about the clouds! DG 🙂

Thanks for your comment, yes agree it's a good thing to have a variety of optional figures to fly, enabling precision to be flown as well as 3D. Also it allows a wider range of models to be used 👍🏻 Good luck with your C test and hope the video helps a bit. DG

Sorry, no video of the flight I don't think. I may fly the figures again as a tutorial and get them videoed in future. 👍🏻

Done at BMFA North Achievement Day. Only person there who'd seen a C test before was Andy Symonds.

Thank you 👍🏻 Yes, will do a couple more when weather allows and someone is there to film 🙂👍🏻

Thank you for the comment. On the plan it is for single channel rudder only with f/f option. I made this one with a threaded pushrod adjustable rudder for f/f. I have made a second one since this video for 2 channel radio on rudder and elevator, for the PAW 80 motor and it flys really well. Best wishes if you decide to build one 👍DG

Thank you for commenting 👍

Haha yes, can just about fit in it for a flight 🙂

Hi, thank you - fun model to fly on a calm evening 👍🏻 The motor is an ASP 52.

Hi, yes any of the Pilot RC aerobatic models and of course Extreme Flight and Flex Innovations models. Depends how large scale you want to go, but a 74-78" model will do all the things a 35% will do at much less build cost and running cost. Extra NG's and Slicks offer a locked in precision feel while still being awesome 3D machines. In addition, some of the older designs are great for getting into 3D as they are less aggressive in nature. DG👍

@@dgaerobatics1764 👍🏾👍🏾

Thank you for the info 👍 DG

Hi sorry my english .....the position of CG in this model wings is to 0°??

@@avionette that's ok, I've got the CG position 100mm back from the leading edge of the top wing. Flys lovely at this CG point 👍🏻

Great flight Ally and the nose falling off doesn't notice! Easily done on the bumpy grass. 👍🏻

Thank you, enjoyed that flight 🙂

Glad you enjoyed it👍🏻. The SE5 is definitely a fun model to fly and in that size, convenient for transport. Would love a Sopwith or Hawker, maybe one day! Thanks for your comment - DG

haha yes a bit fast, I will slow her down a bit on the next flights. Thank you👍

Yes there is something about a WW1 fighter, bit of air about them. Thanks, glad you liked it! DG

Thank you! She really is an enjoyable model to fly.

Hi, thanks for you comment. I have connected to the sbus2 ports on both receivers. Make sure that rx1 on your tx is the one connected to the rx1 port on the Pioneer, otherwise the telemetry isn't available (for example - if rx2 is unintentionally connected to rx1 port on the Pioneer). Hope this helps 👍🏻

@@dgaerobatics1764 Awesome 👌 Thank's a lot for the help

Hi, just using the esc bec on this model. The esc bec is rated at 10amps so more than enough. The other option is to use a small lipo pack if you wish and change it out every couple of flights, which some pilots do. It doesn't add much weight. I use on-board battery in models bigger than 60". Hope that helps 👍🏻

@@dgaerobatics1764 thanks!

Think that’s a good size looking at getting something in the 60” range… been using smaller or foam planes for my go to model but they just don’t fly that great

​@@slange455Yes they're a good convenient size and in the sweet spot for 6s 4000 packs. Thanks for commenting and good luck, DG

Thank you for commenting on my video Mark, what an honour! I built her in 2015 and she's still going strong. Best wishes, Dan.

Thank you 👍🏻🙂

Hi, the model shouldn't go into a spin if there is enough elevator travel on 3D rates and only small amounts of rudder/aileron are used, to keep the model on the right track. Even if the model does spin, it will be a gentle upright or inverted flat spin and you almost have to make it spin by applying lots of rudder. Hope the helps and thanks for your comment. 👍🏻

@@dgaerobatics1764 Thanks for your answer.

Thanks Ally, she sure is a great fun plane to fly as you know. 👍🏻 The 107 of yours is well worthy of the hangar space!

Thank you! 👍🏻 glad you liked the flight 🙂

Hi, Backplate to prop driver on the GP123 is 157.5mm. Firewall to prop driver on the Laser is in the region of 196.5 to 197.5 which gives 2-3 mm gap. I made up laser cut spacers totalling 40mm from plywood and cyanoed them together to give the required standoff length. Hope this helps 👍

@@dgaerobatics1764 Thank you so much for sharing this information. Do you remember which bolts did you used?

@@Wilmer787 Hi, yes ended up using M6x70mm socket cap screws. They did the trick 👍🏻

​@@dgaerobatics1764 Its me again ✌️ What CG setting do you have in this Laser?

@@Wilmer787 Hi, that's alright! CG on this plane is on the recommended CG position. It flips around the wing tube at that point. I have since moved the batteries back a bit from the position in the video.👍

Thank you for your comment, hope the video helps👍🏻

Thank you for your comment 👍🏻 Sure, the set up is GP123, Mejzlik 28*10, Futaba, CLI 380 Servos and Zimmerman canisters. For a more detailed look: th-cam.com/video/IPxXlApuqws/w-d-xo.html

@@dgaerobatics1764 Thank you so much for the info!

Thank you for your comment 👍🏻 and glad it's helpful. That's a good topic for a future video, will do one when I have time 👍🏻

@@dgaerobatics1764 still waiting buddy!!! :)

Thank you! Hope you find value in some of my videos. 👍🏻

Thanks for your comment on my video 👍🏻 Guess the small amount of views is that it hasn't been shared but that's ok 🙂 Yes, I plan on doing some of the 2022 sequences when the weather gets better here. All the best.

Thank you very much 👍🏻

Yep half way there Paul! 👍🏻 Done plenty of that here in the past too 🙂

Thank you, hope it helps!

Hi, glad you liked the video and it may help a bit 👍🏻🙂

Hi Pete, thanks and good to hear from you, glad all is well down at Newmarket! 👍🏻🙂