วีดีโอ

💯

Thx, something for the road, lol.

Thank you. Respect! 🙂

Much respect and a thousand thanx, my friend.

🥳 celebration 😊

LMAO!!! That's a gud won 🤣🤣🤣🤣

Thank you!!!

First, thank you so much for taking time out to watch my video. I used Roxul and sprayed the inside as well so the fibers won't escape, or at least minimize fiber escape. But mostly cos I read online that ATC uses Rockwool for damping. I stole that idea, lol. Yeah, that glue part still gives me nightmares. Rookie mistake. 😂😂. Deuces. ✌

@@themixuniversity You’re more than welcome my friend. Again great first time build. I’ve used Roxul as well for car audio boxes. I just figured I’d mess with ya a little. I’ve also had similar glue incidents. We all have to start somewhere and I’d rather have a little too much glue than not enough and the double baffle vibrate as a result or simply fall apart.

@@P-J-W-777 A rattling cabinet after spending all that money might make a grown man go postal, lmao! Lemme share this with you. So in the middle of my build, I had the cable company come install fiber optics for the studio. At the time, I was sanding the cabinets and they were close to the entrance so I could drag them outside 'cos of the dust. I came back inside and the fat cable guy was sitting on my speaker cabinet. Nooooooooo! Let's just say he made it out alive. 🤣🤣🤣🤣. My girl said at least I know now the cabinet is solid. 😂

@@themixuniversity No doubt about that, going postal would have been just the beginning. Wow, such disrespect! Speaking of going postal, the cable guy would have had some fiber permanently installed in his back side. Sounds like something my wife would have said as well. When you decide to build another set of speakers (and you will) try out truck bed liner on the cabinet. You can get it in different colors and looks really good on the box and also acts as a sound deadener and also does really well at protecting the cabinets as well.

LMAO!!! TMI 🤣🤣🤣. I had to look up the bed liner thingy. Very interesting. I'll let you know when I start a new project so I can steal me some game. 😁

Thank you. 💕

A thousand thanks for taking time out to watch the video. I simply wanted others to be able to do better should they aspire to build something like this. Deuces. ✌

My experience is that since I started mixing on these speakers, I no longer have to second guess my levels or frequencies. Nor do I have to do the car speakers test, then run back to make adjustments. I have 20 banks and preset emulations of various speakers at the click of a mouse into the pre amp's memory slots. I accomplished my mission. I can't put a price on the quality of sound as that becomes quantitative which is highly improbable. Thx for the challenging question. Deuces. ✌

Hey, there. Thx for watching the video. I'm afraid I can't share the schematics just yet for various reasons. Once I can, you'll be the first person I contact. Please, be patient my friend. Thx again.

Thx. I returned the subscribe favor. "Grooving to the music 🎶🎷HTA200 💃🏼🕺🏻" is dope!

@@themixuniversity Thank you! 🎶🎷😊👽✌🏼

Why is it wrong? Can you explain the physics, pls? Thank you.

Thx and much respect. I'll have to give that credit to David Hahn, who works for the largest transducers distributor in Europe. He had suggested the drivers. I just blindly believed him since he also designed the cabinet to precise specifications. I simply took it further with the reinforcements so the box didn't rattle. Imagine a rattling baffle. LMAO! 😂. Thanks for recognizing Wavecor drivers. They are the most linear sounding drivers I've listened to since Vintage King. Deuces. ✌🏽

Thx. So about the paint job. That was the most frustrating part of the build. I had no idea what to do and figured I'd wing it. In my head, I saw the finish of a Ferrari but got a truck finish but a dark red good, truck finish. 🤣. Plus the freaking gun was spraying like it didn't want to work. I had zero help from the time I brought the panels home from the CNC cuts. You're right though, I just didn't want to spend another $1,500 on a paint job. But thx again. Deuces.

Thank you

Yasss!!! Lol. Thank you 💕

Thx 💕

The bundle up mix. 😀

Thank you 💕💕💕

Thx again.

Thank you. Much respect. ✌🏽

I knew people would school me on things I have limited knowledge about. So thx for the lesson. I'm a sponge and I learn very quickly. I will incorporate this into my next build. Hope you're open to consultation. 👍🏽

Thx. I had zero experience in that department and I just took a plunge. And it was disastrous in the beginning as you saw. No idea what I was doing. LMAO!!! I edited out my frustration in the video. Plus the fumes got in my lungs and eyes. Where were you when I needed help, man? 😆. But I hear your advice though. I'll let you know if I build another one. Won't be as big as this one but we'll se.

They hit at 30Hz. The rumble is crazy!!! 😃

Thx you. It was a wild gamble since I didn't know crap before I started but I learned and read up everything I could find. And the manufacturers must have got tired of me calling every 2 days, asking dumb questions. 🤣😂

@@themixuniversity ill check the video out tomorrow I should've gone to bed 5 hours ago but I just kept hitting the JUUL and here I am...Wish my audio experience was like yours. I tried to spend 200 dollars to replace my blown out car speakers and ended up with a 2k JL Kicker hybrid system wtf.

@@sparklesparklesparkle6318 And I thought I had issues. 🤣🤣🤣. I hear you. Deuces

@@themixuniversity nice build very cool!

@@sparklesparklesparkle6318 Much respect.

Thx 4 the feedback. No deathtrap here. Fibrous disentanglement was factored into the damping. Hence, the sealing of the material (not shown) on the exposed surface. I think I covered that fairly. Thx again. I used "accidentally" simply because I, well, David, started the design to replicate the ATC SCM 45. I had no clue at the time what dimensions the transducers were. By the time I built the speakers, the design had morphed into the territory of the ATC SCM 110. We had to restructure the cabinet to accommodate the eventual choice of 8.75 in woofers pumping out a total of 600 W with no baffle. So, bloody hell yeah, "accidentally".

@@themixuniversity How do you "seal" rockwool? XD

@@xaerothehero Encapsulation spray or sealant (specifically designed for insulation materials). See? Told you I studied the physics of it. Hehehe.

@@themixuniversity Link that product please, never seen that

Settle down Karen they have put way more toxic materials in speakers for years

I tried, but that was my flaw. Couldn't sand it smoothly enough. All the car places I called wanted to charge me $1,500 for two boxes. My next ones are going to be epic. Maybe I'll consult with you since you're the expert. 😊. Thx, again.

​@@themixuniversity It looks fine ...

Thx for the advice. Next time. You saw my mistake, huh? Lol

My apologies. I will add a link and let you know. Thx for the comment.

@@themixuniversity thnks bro....and that's sexiest box i seen 🌟

@@scoopoutclub4677 Hahaha, so cool. Ok, I put up the mix in the description. Happy now? LMAO!!! Just kidding.

Thank you 💕

Hi there

Hi there. Thx for the support. ❤️

Thk you

Thank you.

Thk you ❤️

Thk you!!! 🙏🏽

Hey

@@lartistzikou9427 Hi there

Hello there

Coming from you, that's high compliments of stellar magnitude. Many thx.