วีดีโอ

Hi @WoodRobinson-oi8wi, just double-checked my flight logs from recent mapping missions, but when using waypoints the Air 3 will keep the exact altitude as defined in the mission. It seems terrain follow mode is only available for DJI Enterprise Drones: www.heliguy.com/blogs/posts/benefits-of-terrain-mode-with-dji-drones-for-aerial-surveying#:~:text=Terrain%20Follow%20allows%20the%20drone,as%20hilly%20or%20mountainous%20regions.

Hi @craig_Dronepilotsqld , when I took photos of the exact same field for stitching in an altitude of 40m last year, WebODM wasn´t able to stich the photos together. After a bit of research I learned that WebODM has problems when stitching photos taken in a low altitude and a field with no major distinguishing features. So my take on that (so far) is that WebODM needs photos from a higher altitude, whereas Skyebrowse gives better results with a video in a lower altitude. I also created the same mapping with Skyebrowse in 4K in 35 m altitude, but comparing it with the (Skyebrowse) mapping in 1080p in 35m I cannot see any significant improvements! Finally, WebODM is able to work with GCP´s (Ground Control Points), and this would definitely improve the quality of the result.

Glad you find my videos useful! Indeed Dronelink has no equivalent drone for planning with the 3x lens, there is only the "Mavic 3 Enterprise (Zoom)", which is a 162mm lense - no exact match, but maybe a good starting point for some tests. I agree with you that the Air 3 is a good combination of holiday use and photogrammetry, not only for the 3x lens, but also for the higher wind resistance: as I live in an area with strong winds, for me the Air 3 was the obvious choice over the Mini 4 pro.

Thanks for the hint, depending on your dronelink plan (starter/elite/..) it seems possible. Nevertheless keep in mind if you do a direct import from a dronelink export to the controller, DJI will convert straight lines into curved lines, which is not optimal for a field mapping. This is also mentioned here, and obviously the same problem for Mavic 3 pilots: forum.dji.com/forum.php?mod=viewthread&tid=286066 So this is the reason I added additional waypoints to the edges of my flight path in Litchi, to straighten the lines as good as possible, as described in my video in chapter 2 (Flight planning with Litchi).

@@stefanwoermcke6828 ok tq info

Glad you like my video! Further testing is underway: I just subscribed for a 2 week trial at Skyebrowse.com to compare mapping with 1080p vs 4k Videos. As soon as weather permits, I plan to do the same field mapping as described in my step-by-step tutorial I published a while ago: th-cam.com/video/JSSIjOQLLd8/w-d-xo.html As soon as I finished my testing I´ll comment here!

Cheers! If you have any info regarding skyebrowse with Avata 2 that would be great too!

Are you looking for Interior Mapping? Then the tutorial for the Avata maybe of use for you: www.skyebrowse.com/news/2024/1/24/interior-mapping-tutorial

@@stefanwoermcke6828 i was curious if avata can be used for both exterior n interior, so we can just buy 1 drone to do both of the task

@MarkAngel86 I can only speak for the Avata 1, where you would have to fly your mapping missions manually, as there is no automatic flight planning like Waypoints. And as for a mapping of huge fields (where you will have to point your camera 90 degrees downwards), it will be hard to fly a regular pattern (with 70-80% overlap) to cover the whole field just by looking through the goggles. An alternative for interior mapping maybe with a phone or a DJI Osmo Pocket (also on my list for testing).

Yes, indeed litchi is easier to use! Just out of interest: will the litchi mission be uploaded to the m3p? With my Mavic Air 2, the litchi up won´t upload the mission upfront, but instead will give constant commands from the App (via the remote), which (depending on signal strength) leads to jerky videos, especially when cornering. In contrast, waypoint missions with the Air3 seem to be uploaded upfront, resulting in buttery smooth videos without any jerks!

Gerne!

Leider wird die DJI Air 3 von Dronelink nicht unterstützt: www.dronelink.com/supported-drones Somit ist eine direkte Steuerung der Air 3 durch Dronelink nicht möglich

I´m afraid dronelink does not offer to create an account for free

For litchi it seems you can create an account without paying for the Litchi App - which makes sense as without the app you won´t have the benefit of automated syncing: flights planned on the desktop will be automatically available on the Litchi App. For our use case we don´t need the litchi app, as we only use the export function

Sorry to hear that - but I guess it is a bit "Apple-Hardware" related: I recently had an issue with a Mac Mini 2020 (Intel i7), where the simple uninstall/install trick didn't work. But finally I managed to connect the Mac Mini with the RC2 as well. Steps I took to make this work (not sure if everything here is necessary, but at least it is connecting with this workflow): - uninstall DJI Assistant 2 - delete ~/Library/Application Support/DJIAssistant2 (to my surprise I found many folder with "DJI Assistant" with variations in names in there, and I deleted all folder with "DJI Assistant" names) - restarted the Mac Mini - installed DJI Assistant 2 (consumer drones again) - launched DJI Assistant 2 (and allowed network connections) Now on first connect I had the famous "Couldn't connect" again. But without acknowledging the error message, but simply unplugging the controller and plugging in again - I saw the files and folders of the controller! Before accessing the folder, I first had to acknowledge the "couldn't connect" error message one more time - which closed the view of the files and folders (kind of a shock). But when starting Android File Transfer application again and I had full access to all files and folder of the RC2! This approach also "survived" a reboot of the machine - you still have to unplug and plug for the first time, and THEN acknowledge the error message, but it is working consistently! Let me know if this approach works for you as well!

@@stefanwoermcke6828 many thanks for the update, I’ll give it a go tonight. I as hoping a new Mac mini M2 would be a good investment but things like file transfer and not being able to get certain app to work like reality capture because of the lack of Nvidia driver/card is a pain. Think I might just get a windows gaming PC instead 😢😢😢

Vielen Dank! Bzgl. automatischer Übersetzung: ich habe das jetzt selbst einmal getestet: sobald man die "Subtitles" einschaltet, und danach erst das "Zahnrad" Symbol, und dann "Subtitles/CC" anklickt, gibt es da eine Option "Auto Translate": da kann man dann diverse Sprachen auswählen. Ich schaue das Video jetzt gerade mit Italienschien Untertiteln ;-)

Hi @juliogarciadelapena7145, unfortunately you can´t export the plan from Dronelink to Litchi. My approach (as described in the video): have two browser windows (Dronelink and Litchi) side by side, and then draw the flightpath manually in Litchi. Doesn´t need to be 100% the same as in Dronelink, but as long as you have more or less the same pattern in Litchi you should be fine!

Glad you enjoyed the video! I think the Mavic Air2 is still a great drone! And I'm not sure that I can create the same move with the Air3 in the described way, as the Air3 (if positioned with the dial behind the car) will not wait until the car starts moving, but starts immediately positioning itself behind the subject!. Not tested yet with the Air3, but will test it as soon as weather permits!

Arbeitest Du auf einem Mac oder Windows? Auf dem Mac muss man zuerst "Android File Transfer" herunterladen und installieren, den DJ RC2 einschalten und per Kabel anschließen. Je nach Version des Macs (auf meinem MacBook 2016 zeigt Android File Transfer die Ordner sofort an, auf meinem MacMini 2020 muss ich das Kabel mehrmals ein- und ausstecken) sieht man dann die Ordner, und kann Dateien per Drag-and-Drop verschieben, wie ich das im Video auch mache. Are you on Mac or Windows? On Mac you have to download and install "Android File Transfer", then power up the DJ RC2 and connect it via cable. Depending on the version of the Mac (on my MacBook 2016, Android File Transfer will immediately display the folders, on my MacMini 2020 I have to plug-in/out the cable several times) you see the folders , and you can drag-and-drop files as you can see in my video.

Ich arbeite an Windows@@stefanwoermcke6828

Leider habe ich keinen Windows PC zum testen, aber eigentlich sollte das für die DJI RC2 so funktionieren: th-cam.com/video/VXuNVCLAngM/w-d-xo.htmlsi=feFO5wrAcEXAMrlF Vielleicht mal einen anderen PC (wenn vorhanden) nehmen? Beim iMac (M3) habe ich es trotz installierter Software (Android File Transfer) und mehrfachem Ein- und Ausstecker noch nie geschafft, die Ordner der RC2 anzuzeigen! Und da schon bei MacOS drei verschiedene Rechner sich komplett anders verhalten, kann ich mir vorstellen, dass der DJI RC2 auch bei Windows "wählerisch" bzgl. der Hardware ist?

Hallo @lucabracco422 , nun hatte ich ein ähnliches Problem mit dem neuen Mac: ein- und ausgesteckt, aber das Dateisystem des Controller wurde einfach nicht angezeigt! Jetzt habe ich (wie hier beschrieben th-cam.com/video/4Gf7facgJj4/w-d-xo.html) den DJI Assistant 2 neu installiert - und nun klappt´s sofort! Den DJI Assistant gibt es ja auch für Windows - vielleicht hilft das ja auch bei Dir?

Hi @SiamakSadati , just did a quick test: 48MP Photo (single shot) takes around 2 sec with the Air 3!

@stefanwoermcke6828 Thank you so much,so in this case, it's a great improvement and makes it capable of capturing photos in 10m/s flying mission, and with extra battery capacity it can double the coverage in single mission. I should consider buying air3 as soon as possible ✌️

I guess you´re referring to options to choose the air3 in Dronelink? Yes, that´s correct, and this is why I had to draw the path manually again in Litchi, as shown in the video

Great, so thank you very much. I have a controller RCN2. I implemented all the steps as they are, but the problem is difficult to deal with using the controller. When the number of points exceeds 100, there is no smoothness in dealing with the controller. hung or freeze "The controller automatically restarts after importing kmz file ." @@stefanwoermcke6828

Hi, I have the same setup: still have my old Mavic Air2 and the new Air3, and recently did a side-by-side comparison, mapping the same field with the MA2 and the Air3: it was a cloudy day, and some pictures from the MA2 (controlled via Dronelink) where a bit blurry, while pictures from the Air3 (controlled by waypoints, as described in the video) were all crisp and clear. So if you have both drones available, consider using the Mavic Air 2 for sunny days, and the Air3 for challenging weather conditions: the better sensor of the Air 3 will definitely give you better photo quality in those conditions, which should also help when stitching the photos afterwards! And if you follow the described steps several times, you'll get used to it, and it will become a fast and standard process. On top, the longer battery life of the Air3 will give you the ability also to map larger fields in one flight.

@@stefanwoermcke6828 Granted, flight time would improve. I can do 10ha @ 30m as a detailed base layer for spot spraying (object base image classification via QGis) of thistles in corn. For basic scouting i do 30ha @ 80m, which easily fits one battery per run

Thanks for pointing this out, you´re spot on!!! Nevertheless for the setting for the timed shots I would prefer not to round it up to 5 sec: 105s / 5s = 21 photos, but instead go with 4 sec: 105 / 4 = 26 photos (rounded). But now you made me curious to know how strict we have to stay to the number Dronelink calculated (24 photos)! As soon as weather permits, I´ll fly another mission with timed shots set to 5s, trying to stitch the picture in WebODM with 21 photos, and post my findings here.

Thanks for your feedback! Are you planning to upload a Litchi Mission (KMZ) into the Pilot 2 app? What I have read so far, the DJI Pilot 2 app is only compatible with enterprise drones, but not with consumer drones like the DJI Air 3 - or is there a workaround?