@peakerbox just look up airsoft milsim events. This 1 was thru a company called other world milsim. They are based outta Lebanon Pa at a shop called jackel tactical. They are some good people
@@chazz1990camarors that's actually awesome man! I played paintball and had my own gear growing up as a kid, but I always admired airsoft more.. these events I see like this even more so. definitely on my bucket list, and I'll totally check it out! thank you for putting me on the info-track I really appreciate it my friend. best of luck, success, and health to you.
I have fitted a makuni 38 to my 1100. I can get it to run on choke but dies of choke. There is a 220 main jet and a 27.5 pilot jet. If you have put the pilot to 41 maybe that's a path I have to go down. Fingers crossed. 👍🏻
Out of curiosity how does the gas tank work being that the petcock is vacuum operated? And did u order a throttle cable or just trim down the stock one
@@chazz1990camarors so your saying u hooked vacuum line to the vm30 cause I thought it didn't have any vacuum ports my setup on my 700 is pretty much identical to yours
@@miltonrobinson5183 their was a vacuum line coming off the bike that it ran into the old petcock i just swapped it out for a new 1. Then i just ran my normal fuel line to the carb from the pet cock.
I’m in the process of tuning mine. I have a 84 virago 700. I got a 35 pilot but now I’m having to mess with the main. I accidentally bought a 140 main which I’m hoping going to figure out a way to make it a little bigger.
I have the cheapo intake too but I'm having a hard time cause is not flush and always got a leak somewhere. Making some fat rubber gaskets and silicone to make it work, but I'm still struggling on the jetting in FL, main jet 180 and having issues with needle position, test all slots but still sputtering 3/4 to full throttle and is very frustrating. It idles perfect no issues but when I rev it high rpms in neutral it pops and sometimes clean but when I ride it it runs like shit in open throttle. Next I will adjust the valves and put a 190 jet and start in the middle with the needle, cause my front cylinder is the one I caught with a leak spark plug was lean so I put a hot spark plug in front and cold on rear and rear cylinder was perfect golden brown. I will buy the JKS intake cause I think it will help me a lot. Any suggestions it will be really appreciated man, great job with the video.
Hope ya recoupe and get back out there!! Ive never cased it on a dirtbike or quad before as I just got my first dirt bike at 35 but have been riding motorcycles on the road for quite a few years... I m sure ill get tossed a time or two when I hit the track lol
8:38 is where I passed you again with me and my buddy were racing each other wish you didn’t have a little crash would have been cool seeing me rip by you
Pretty good info! I'm doing something similar to my bike. If i give up on getting a stock carb tuned right i'll just buy the mikuni and use your jetting. Thanks man
nice game play dude keep it up
Where did this event take place ?
@@quintonfraser4099 sci cresson prison
I find this outrageously cool, but I have absolutely no clue where throughout the US one would be able to participate in such events.
@peakerbox just look up airsoft milsim events. This 1 was thru a company called other world milsim. They are based outta Lebanon Pa at a shop called jackel tactical. They are some good people
@@peakerbox also milsim west does some around the east coast
@@chazz1990camarors that's actually awesome man! I played paintball and had my own gear growing up as a kid, but I always admired airsoft more.. these events I see like this even more so. definitely on my bucket list, and I'll totally check it out! thank you for putting me on the info-track I really appreciate it my friend. best of luck, success, and health to you.
Ccreepy
What's this
dads a badass.
Nice
I have fitted a makuni 38 to my 1100. I can get it to run on choke but dies of choke. There is a 220 main jet and a 27.5 pilot jet. If you have put the pilot to 41 maybe that's a path I have to go down. Fingers crossed. 👍🏻
Those 305s suck no power.. wasting money on exhaust. May sound fast but still a snails pace pos car
Get a 350 or 383 stroker engine
too drunk to start
She’s a quart low Lmao
How much oil was burned to make this video?
Need job.... Smokie
Thit Sound ist awsome
Amazing show! they crushed it!!
That was a good race we had
Yikes
That's not slaughter just to Let u know.
Ik lol i posted alot of vids so prolly got mixed up
I have a 94 yamaha virago 750 and put on a fcr35 and i cant get it to jet jt right what size u think i should do
Hey ?
What part of PA? I could really use a hand with my virago sing carb conversion 😅
*PCV* valve
Changing your PVC valve on that would help that cold start smoking.
You can go fast if you choose to add some performance parts even a hydraulic flat tapped cam as well
What elevation are you at?
About 400 feet above sea level
Out of curiosity how does the gas tank work being that the petcock is vacuum operated? And did u order a throttle cable or just trim down the stock one
I cant remember about the throttle cable but this bike is vacuum run so i just ran the original vacuum line from the old petcock too it
@@chazz1990camarors so your saying u hooked vacuum line to the vm30 cause I thought it didn't have any vacuum ports my setup on my 700 is pretty much identical to yours
@@miltonrobinson5183 their was a vacuum line coming off the bike that it ran into the old petcock i just swapped it out for a new 1. Then i just ran my normal fuel line to the carb from the pet cock.
Nice
😊😊
I think you might need some new Valve seals.
I just bought the hero10
This was a great show last night!
That was my 1st time seeing all 3 of those bands and man was it fucking awesome
Got mmm
You should go to brezzwood the first weekend of July
I have to see if im free but id like to get back out there soon
Time to rebuild the motor.
I’m in the process of tuning mine. I have a 84 virago 700. I got a 35 pilot but now I’m having to mess with the main. I accidentally bought a 140 main which I’m hoping going to figure out a way to make it a little bigger.
I have the cheapo intake too but I'm having a hard time cause is not flush and always got a leak somewhere. Making some fat rubber gaskets and silicone to make it work, but I'm still struggling on the jetting in FL, main jet 180 and having issues with needle position, test all slots but still sputtering 3/4 to full throttle and is very frustrating. It idles perfect no issues but when I rev it high rpms in neutral it pops and sometimes clean but when I ride it it runs like shit in open throttle. Next I will adjust the valves and put a 190 jet and start in the middle with the needle, cause my front cylinder is the one I caught with a leak spark plug was lean so I put a hot spark plug in front and cold on rear and rear cylinder was perfect golden brown. I will buy the JKS intake cause I think it will help me a lot. Any suggestions it will be really appreciated man, great job with the video.
Sounds like alot. I would go with the jks ive heard good things about them n they can jet it properly for ur area
Hope ya recoupe and get back out there!! Ive never cased it on a dirtbike or quad before as I just got my first dirt bike at 35 but have been riding motorcycles on the road for quite a few years... I m sure ill get tossed a time or two when I hit the track lol
Good riding man
8:38 is where I passed you again with me and my buddy were racing each other wish you didn’t have a little crash would have been cool seeing me rip by you
That’s me on the quad at 4:08
Great video, I have an 84 virago xv700. I bought a similar carb to do my single carb conversion
Pretty good info! I'm doing something similar to my bike. If i give up on getting a stock carb tuned right i'll just buy the mikuni and use your jetting. Thanks man
I had that model 400 but in Australia they were white
Sounds good
Slow masters
Shit engine 🤔
Can your beautiful bike do a top speed with that size of carburetor?
I can hold about 90 95 but im not big on going fast on a motorcycle but it will hold it
I can hold 90 95 on the highway pretty easy.
Heck with exaust how bout some rings
th-cam.com/video/zTS00VhiUVU/w-d-xo.html