วีดีโอ

If your tank is made by Heng Long, you can find the parts here. www.aliexpress.com/item/4000417283114.html?spm=a2g0o.detail.1000014.17.23f045c0Xspx7X&gps-id=pcDetailBottomMoreOtherSeller& If you install this 360 ° Gear and Electric Slip Ring, you can rotate 360 ° without twisting the wiring. Please note that Gear comes in two sizes. For details on the red eyes and machine gun muzzle flash, please read the description of this video. th-cam.com/video/xL_8lrs4ljA/w-d-xo.html The motherboard and internal parts of the turret were purchased from Clark Model.

I installed a slip ring to prevent the wiring from twisting and then installed a ring gear that can rotate 360 ​​degrees. I bought both on Ali Express. There are two sizes of ring gear, but the one for the T90 is the larger size.

​@@ectpnbwwctyoplhtthank you

In this video, the Heng Long board is replaced with a Clark Model board that has two MG LED connectors. Please refer to another video I made in which I operate two MGs on the Heng Long board. th-cam.com/video/H8jtfWpgnfQ/w-d-xo.html

sorry. I'm not interested in flying BBs because it clutters the room.

Same specifications as the real T90

Благодаря ти

thank you. Operating the recoil unit in this way is possible in both 7.0 and 7.1. This recoil unit is for controller boards before TK5.3, so we used a relay to make it usable on controller boards after TK6.0. If you already have 7.1, you can also use the gun recoil method in this video. th-cam.com/video/nBR65c6dx9A/w-d-xo.html

My environment is a 9.9V life battery (voltage is 10.8V when fully charged) and the basis of the Clark model. This board outputs the battery voltage as it is from the connector, so Calculating with a voltage of 10.8V, the required resistance value is 220.1 Ω (0.198W). I forget which resistor I used, but I think I used a resistor close to this resistance value. Since the output voltage of the Henron board differs depending on the connector, the resistor used will also change. By the way Calculated with a voltage of 5V: 26.7 Ω (0.024W) Calculating with a voltage of 8V, it becomes 126.7 Ω (0.114W). Try using a resistor with a similar resistance value. I apologize if I'm wrong. Just to be sure, please calculate it yourself before trying.

@@ectpnbwwctyoplht ok thank you👍

Thanks👻👻👻

Спасибо.👻

✌️

I bought parts from various places and modified the tank. I spent over $400 on parts alone.

thank you. An optical fiber is passed through the machine gun that was originally attached. You can see how to do it by watching this video. th-cam.com/video/xL_8lrs4ljA/w-d-xo.html

​Huge thanks👍👍

thank you. I purchased the LED by mail order at an electronic parts store in Tokyo. Unfortunately, it seems that shipping is only available within Japan. I forget where I bought the optical fiber, but I think I bought it on Amazon.

Yeah okay I already asked you in another video but thanks👍

thank you. It uses a slip ring and a 360 Turret Ring to allow unlimited turret rotation.

@@ectpnbwwctyoplht i put one in my Tamiya leo 2a6 about 12 years ago .

Motherboard used for my tank is CLARK MODEL TK80SPG2. Even motherboards other than the 80 series can use the Engine Deck Level Detection function if the model name includes G2.

What are the parts you used for the auto gun elevation?

@@phorealfpv6043 I am using Clark model's Universal Turret Rotation Unit with Engine Deck Level Detection Switch (Part No. 16014), tank controller board TK80SPG2, and Servo Recoil and elevation upgrade Kit for HengLong T-90 (Part No. 16020). Tank controller boards with G2 in their model name are compatible with Engine Deck Level Detection Switch.

@@ectpnbwwctyoplht Where can I get all these parts from?

I bought parts here. www.clark-model.com/index.html

Is required. The work was easy because a template for positioning the holes and a hole saw were included. However, it is necessary to prepare an electric drill in advance.

@@ectpnbwwctyoplht i see. so in total need 2 motherboard to operate the tank right? for tank and for the weapon station

@@BrickKLStudios With relays it is possible to operate both tanks and weapon stations with one transmitter and one controller board. I can't make any promises, but I have a plan to show you how in a video.

나도 몰라

Thank you

Be careful not to rotate the machine gun with the barrel pointing downward, as it will come in contact with the turret parts and damage the geared motor.

yes, it does damage the parts.

Ищите «T90 Upgrade Part Red Black Eyes», чтобы найти магазин, в котором они продаются. Для способа подключения я соединил последовательно два красных светодиода и резистор и вставил его в гнездо светодиода контроллера TK6.0S. Пожалуйста, обратитесь к соответствующему видео. th-cam.com/video/H8jtfWpgnfQ/w-d-xo.html

Спасибо👍

Я купил «Clark model T-90 Full Option upgrade package» и установил его как есть, а затем заменил контроллер танка на TK6.1S, чтобы отвести основное орудие. Пожалуйста, обратитесь к этим двум видео, чтобы узнать, как управлять Шторой. th-cam.com/video/xL_8lrs4ljA/w-d-xo.html th-cam.com/video/H8jtfWpgnfQ/w-d-xo.html

@@ectpnbwwctyoplht большое спасибо

In the video, two sets of transmitters and receivers are used to operate. I am looking for a way to work with one heng long transmitter and one receiver. I will upload the video when it is completed.

Thank you ;)

thank you.

th-cam.com/video/xL_8lrs4ljA/w-d-xo.html

Thank you

You are the first to compliment my cat Thank you

thank you.

The wiring will be twisted if nothing is modified Slip Ring will not twist no matter how many times it is rotated Slip Rings are sold here www.aliexpress.com/item/32984731269.html?spm=a2g0o.productlist.0.0.656e5849PKxI2B&algo_pvid=d2edeb3c-b980-4bc2-b6b8-520079d135da&algo_exp_id=d2edeb3c-b980-4bc2-b6b8-520079d135da&algo_exp_id=d2edeb3c-b980-4bc2-b6b8-d1dp%0%dp%5dp9db9d2edeb3c-b980-4bc2-b6b8-5200

@@ectpnbwwctyoplht thanks

The wires of the slip ring are thin, so when connecting to a motor or servo motor, use 3 wires on the + side and 3 wires on the - side. A single wire may burn the wire. For LEDs, one on the + side and one on the - side will suffice.

Не знаю, возможна ли доставка в ваш регион, но здесь вы можете купить Т-90 различных марок.aliexpress.ru/wholesale?catId=0&initiative_id=SB_20221129023901&SearchText=heng+long+T90&spm=a2g0o.productlist.1000002.0

This video uses the 6.0S tank controller. The wiring method for activating the recoil unit with the 5.3 tank controller is different from the 6.0S. Unfortunately I don't have a 5.3 tank controller so I can't give any advice. HENG LONG's tank controller will fire if you wire it wrong, so you need to find the right way to wire it.

@@ectpnbwwctyoplht BTW thanks, I got this working on my 6.0 HL tanks! Thanks for showing this! I have a bunch of 5.3 HL tanks that could use recoil, I’m just a bit apprehensive and don’t want to screw up the wiring. Thanks again!

*Update! It does work for the 5.3 receivers as well. The only difference is the polarity for the "BB launch system" is reverse!

@@DexterBanks5555 Thank you for providing information. Other than that, I have experienced the 6.0S board burning when I connected the wiring method of the recoil unit's barrel up/down motor in the same way as in 5.3, so please be careful.

Is it a mechanism that automatically raises the barrel so that the barrel and the rear of the hull do not contact each other? I couldn't find one for 6.1S, so the T90 tank in the video uses the Clark model tank controller TK80SPG2 and the Universal Turret Rotation Unit with Engine Deck Level Detection Switch (Item No:16014). Tank controllers with G2 in the model number are compatible with the Engine Deck Level Detection Switch.

thanks a lot for info mate

Thank you

it This a hang long tank

Is2

@@patricktravers9384 The exterior of this tank is mostly made of metal. The exterior of HENG LONG is made of plastic.

@@patricktravers9384 It seems that there are IS-2 and JS-2 in how to call it, This tank is marked JS-2 on the box.

Thank you

😂

The servo motor that raises and lowers the barrel is Tower Pro MG996R. The turret rotation uses the servo motor EMAX ES08MAII. The turret rotation servo motor is operated like a normal motor by removing the internal electronic board and connecting the wiring to the motor terminal through a resistor.

I agree with you. My favorite tank is the T90, but Russian tanks have a small turret, so it's difficult to place modified parts.

Können Sie mir bitte mitteilen wo ich diesen Panzer als Bausatz erwerben kann?Hermann Weiß

Thank you You are good at painting tanks

Ich kann es nicht mit Sicherheit sagen, da ich noch keine Erfahrung mit der Installation eines raucherzeugenden Schlauchs in der Hauptkanone hatte, aber ich halte es für möglich, weil ich das Gefühl habe, ein Video der Modifikation auf TH-cam gesehen zu haben.

I bought it here. ja.aliexpress.com/item/1005004291653854.html?spm=a2g0o.productlist.0.0.5fa25283oSNQSP&algo_pvid=e13db71f-1def-4eec-a4c6-cc58c754b57b&algo_exp_id=e13db71f-1def-4eec-a4c6-cc58b % 22sku_id% 22% 3A% 2212000028651280194% 22% 7D & ppd_npi = 2% 40dis% 21JPY% 21% 211997.0% 21% 21% 21601.0% 21% 21% 40210318cf16552679974137833e56cf% 2112000028651280194% 21sea