วีดีโอ

@caufieldholden277 This is just to prove capabilities of Ansys Fluent to model a fan. The computational domain is selected in a way that we only look at the bulk flow rotation cause of the fan blades, but if wall effects are significant, we can definitely make part of the surrounding wall as the fan enclosure and include the boundary layers in the simulation too.

I am also interested in paid course

There are some practices to make a better animation in FLUENT. Modifying the lighting option can change the final animation, defining proper contour for the surface, as well as proper export settings for the final rendering all have effects on the animation. Also, CFD-post is very powerful when it comes to creating visually realistic animations.

Thank you for your feedback!

Thank you for your question - yes, you can change the pressure and velocity to any desired value and do the simulation.

Thank you for your question - both FLUENT and CFX are advanced CFD tools with a wide range of applications. Fluent provides a wide range of simulation capabilities, including multi-phase flow, turbulence, combustion, and more. CFX, on the other hand performs better when it comes to turbomachinery, but still can be used for simulating complex flow problems, including high-Reynolds number flows, turbulent flows, and multiphase flows. The way they handle the problem computationally is also different. The choice between them will depend on the specific requirements of the simulation problem and user’s experience.

Thanks for your question - Yes, Adaptive meshing can be applied to complicated VOF simulations as well.

PUMA is not available for FSI yet, because Polyhedral mesh is not compatible with Mechanical at this moment.

You're welcome! The presented solutions are applicable to other fans as well. We will soon upload more videos in our channel. Stay tuned!

Oscar, please send us an email and explain what might be missing and we would be happy to assist you.

@@alphaomegaproductdevelopme323 thank you for replying, but I had actually been opening the wrong thing on the context menu of geometry… sorry about that 😅🙂

Thank you for your question. The boundary conditions are all standard default wall. The problem was just initialized with the water column in the tank.

If a solve is terminated due to unexpected downtime - then a credit can be requested. If a solve is terminated due to any other reason - then the elastic currency (subscription) is consumed and will not be credited

Phillip, thank you so much for commenting here, Ansys Cloud trial is not yet available for students or personal use but stay tuned!

Thanks John, we are happy you think so, feel free to send us an email for a free trial!

Please see the description for more information related to this tutorial. The base mesh number was 50,753 cells. For 2 seconds of simulation time, using 112 Cores and 8 nodes (in ANSYS Cloud), the computation took about five hours.

The Adaptive mesh must be computationally heavy to take 5 hours on just 50,000 cells on 112 cores. Did you use Ansys elastic cloud?

The multiphase VOF mesh adaption is unavailable in Eulerian model, and therefore, you cannot select anything from "Predefined Criteria". Perhaps, in the future release, there will be some built-in mesh adaption for Eulerian model. Remember that VOF and Eulerian models are based on two different approaches of solving momentum and continuity equations. However, you should be able to manually apply mesh adaption in Eulerian model. You need to first create a new "Field Variable" under cell registers, and then active the dynamic mesh adaption under "Adaption Control". Please refer to the mixing elbow example (the 1st example) in Ansys Fluent Tutorial for the detailed information.

@@alphaomegaproductdevelopme323 Thank you.

Hi, the purpose of this channel is to give an example of the technology. If you would like for a consulting engagement - I recommend that your contact your local ANSYS Channel Partner.

It's essentially the same. In the past, automatic adaptive mesh refinement was not possible for polyhedral cells. But now, when you use multi-phase adaptive mesh, Fluent automatically uses polyhedral unstructured mesh adaptation (PUMA).

If you want to have access to cloud feel free to send us an email and we will be happy to assist you and provide an evaluation key.

@@alphaomegaproductdevelopme323 Thanks a lot. What I really want is to get elastic research ansys fluent license and use cloud hpc for running simulations. I am using ansys free student version currently as I am graduated now. So is there an answer to my question?

It shouldn’t take that much time. Did you use parallel simulation? Be careful about recording the animation. I selected the animation to be recorded in every 0.001 s of flow-time (NOT time step), to avoid generating too much output. This will not only consume lower RAM, but also significantly increase the computational time. Also, make sure that you use a proper dimension. My domain dimension was 100mm*200mm. I actually used ANSYS Cloud for the computation. Using 112 Cores and 8 nodes, it took me less than five hours for 2 simulation seconds. If you want to know more about Ansys Cloud, please visit this video: th-cam.com/video/RGvV-_ntSvk/w-d-xo.html

@@alphaomegaproductdevelopme323 thank you so much. That helped me a lot. I used the parallel simulation. But went for every time step solution animation, I think this is the reason for massive hours. Thanks for your response 😊.

Of course, let us know if you have any questions!

@@alphaomegaproductdevelopme323 I have a doubt if this simulation has baffle with holes do we need to define contact or just same process?

@@tejeshreddy1055 The simulation process will be essentially the same. No need to define contact. The only thing you may consider is to refine your mesh near the holes by adding local sizing in the pre-processing.

@@alphaomegaproductdevelopme323 on doing so I am unable to see animation if time step is 0.0001 but I am able to see pressure contours and if time step is given 0.01 then simulation gets stopped after 20 iterations. 1. Should I need to refine my mesh more ? My current mesh size is 1mm at all edges And default at remaining surfaces. Thankyou sir/madam for your reply

@@tejeshreddy1055 Instead of a fixed time step, you may use the "Adaptive Multiphase-Specific" time step as shown in this video. This method adjusts the time step based on the Courant number in each iteration. In addition, this type of simulation (multiphase + dynamic mesh) is a heavy computation and generates huge amounts of data and requires high RAM, so if you are having difficulty to see the animation, it might be related to the hardware capability. You can try selecting “In Memory” or “HSF File” for storage type in Animation Definition to see how it works. And regarding your mesh size, as long as you have a good mesh quality (Minimum Orthogonal Quality>0.1 and Mesh Skewness<0.7) you can proceed to the solution mode.

Turbulence model is selected because the flow is locally turbulent, especially at the initial moments where the water column hits the obstacle. The explicit VOF formulation was used to allow using geometric-reconstruction scheme to capture clear, crisp interface without numerical diffusion. In addition to that, explicit scheme generally has better numerical accuracy than implicit scheme. Let me know if this helps.

@@alphaomegaproductdevelopme323 Thank you for your reply! That helps a lot. Regarding the turbulence, how did you determine if the flow is locally turbulent? Was that an assumption or have you calculated that theoretically? I have a similar problem and I am not sure if the laminar model is adequate to use (overall the flow is laminar according the Reynolds number)

@@janweggen7606 The assumption of the mentioned locally-turbulent flow is more intuitive in this case and it comes from the nature of flow features when it suddenly hits solid obstacles. In addition to that, a rough calculation of Reynolds number using the initial water column height (H), and maximum velocity of sqrt(g*H) shows that it exceeds the critical value for channel flows. Therefore, the assumption of turbulent flow seems to be more realistic in this case. It is worth to mention that since the main purpose of this tutorial was to demonstrate the multi-phase adaptive meshing technique, the other settings related to the model setup are not probably the best choice and can certainly be enhanced. For example, the model can be fine-tuned by testing laminar flow or choosing some other turbulence models and compared to the existing experimental data or theoretical results.

Thanks for your comment on that! That helped a lot.

vanderfiq9@gmail.com

Rafiq - thanks for your request - I would be happy to share the file with you - can you send me your email address to john.condon@aopds.com.

Is this error related to the tutorial presented in this video? If so, in which step you got that error?

Under wall boundary conditions, you can set "wall motion" as "moving wall" instead of the stationary wall, and prescribe the absolute "rotational speed" as well as the "rotation-axis origin" and "direction". Note that, you need to assign the same rotational speed and rotational axis direction for all walls. But carefully assign the different rotational axis origin to the walls so that the entire tank rotates properly. For rotating flows, due to the large pressure variations, "PRESTO" or "Body Force Weighted" should be used for the spatial discretization. Also, unlike this example where we are interested in the transient behavior, if you are looking for the steady-state behavior of a rotating flow, the better approach is to enable the "frame motion" under cell zone conditions, and set the rotational velocity there. And then, set the walls to be stationary relative to the adjacent cell zone. Let me know if this helps.

Alpha Omega Product Development Systems Thank you so much for your reply! (I actually use this program to study the water flow in a hollow sphere that rotate around Y and Z axis with the velocity 100 rpm, containing water in a half of its volume: in case you want to know.) I had run the calculations already before I saw your reply (TT) I went for the Cell Zone Condition and used the mesh motion ( Will the result come out okay?) with the velocity 100 rpm right now my computer still calculating the solution.... I’ve been waiting for 2 days! Does it take such a long time like this? And due to your reply I understand more about frame motion and the other ways to control the rotation many thanks 🙏

@@Popocandy_ n general, the transient simulation of two-phase flow in combination with frame/mesh motion should be computationally expensive, and therefore you need to consider your computational resource to handle this simulation. If you are using the adaptive mesh, I would suggest you make a coarser base mesh. For more information about the rotating domain simulation in Fluent and how to set up such models, please refer to the chapter 10-12 in the Fluent User’s Guide. Regarding the time - you could consider adding HPC or using the ANSYS Cloud offering.

Alpha Omega Product Development Systems You are so helpful! Thank you so much! And one last question how did you record the animation in that water color and such a smooth surface? My calculation is done but in my solution animation the water surface is sooo rough... or I did something wrong (U__U)

@@Popocandy_ All the post-processing has been done using CFD-Post. When using the Iso-surface, I would suggest assigning a value of 0.99 or 0.01 (instead of 1 or 0) for air or water volume fraction to get a smoother interface. You can choose the water color using the constant mode in the color tab under the details of the Isosurface window. In addition, you can use the volume rendering option in CFD-Post by choosing the water volume fraction as the variable.

muhammads.noureldin@gmail.com

Thanks for watching our video. Boundary conditions are all no-slip walls. SIMPLE method was used for pressure-velocity coupling. Under-relaxation factors are all the default values of VOF method: Pressure: 0.3, Density: 1, Body forces: 1, Momentum 0.7, Turbulent Kinetic Energy: 0.8, Specific Dissipation Rate: 0.8, Turbulent Viscosity: 1 Since this is an isothermal example and we were not interested in temperature and heat transfer calculation, the energy equation was not used in this particular tutorial.

Thanks for watching our video, yes you can customize your desirable CPU. You can just a an email to sales.support@aopds.com and we can give you all the details you need.

@@alphaomegaproductdevelopme323 Thank you so much. I will write a mail to the given address.

This specific multiphase VOF predefined dynamic adaption is available after ANSYS 2020 release. For the prior versions, the user needs to go through several other manual tasks for VOF dynamic mesh adaptation. You need to enable the "Refine and Coarsen" options in the "Gradient Adaption" dialog box. Please see Chapter 30 of the Fluent User's Guide (2019) and go through Dynamic Gradient Adaption Approach (see Section 30.4.1).

This specific multiphase VOF predefined dynamic adaption is available after ANSYS 2020 release. For the prior versions, the user needs to go through several other manual tasks for VOF dynamic mesh adaptation. You need to enable the "Refine and Coarsen" options in the "Gradient Adaption" dialog box. Please see Chapter 29 of the Fluent 18.0 User's Guide (Dynamic Adaption) and in particular, see Section 29.4 for Dynamic Gradient Adaption.

@@alphaomegaproductdevelopme323 Hello, I tried to follow the steps given in the manual, but I am unable to refine the mesh dynamically. I need to have 6 layers of refinement near the interface at time instances. Can you please guide me through the steps for Fluent 18?

@@varanasisaisubhankar8785 I haven't done this specific dynamic mesh adaption in Fluent 18 before. It is highly recommended to update to Fluent 2020. However, you should be able to do that by following the similar steps described in section 3.4.9 of the below tutorial for Fluent 18 (see pages 192-195). Copy this link and put it in your browser: users.abo.fi/rzevenho/ansys%20fluent%2018%20tutorial%20guide.pdf The above example uses the "curvature" of "temperature" for mesh adaption, but for VOF simulation, you may select "Gradient" for method and select "phase volume fraction" instead of temperature and also enable Dynamic in the Dynamic tab of the Gradient Adaption dialog box (pg. 193). Please also make sure to specify a proper value for both refine and corasen threshold. This should work and dynamically refine the mesh, if the rest of your VOF model is properly set up.