วีดีโอ

this worked perfectly . Thank you for taking the time to show and explain how to fix this eo2 error.

It worked like a charm! I went to our local Hackerspace for the material. This saved me some money and gave me good feeling of being able to fix it! Thanks from Belgium

Mop diesel by cloth and wait for 1/2 hrs

What if your impeller was cracked lol

👍

I also followed your directions and hot tub is up and running with the new impeller installed, thanks so so so much!

It worked in our fridge. Thanks

Which line is the suction vs output, of the top/bottom hoses?

What about if you want to have all these gadgets I think I would be better off buying it from the manufacturer. But great job keep up the good work

While watching the video, the first thing that came to mind was "How much would a new pump cost?" looks to be something that would cost less than $50.

How do I add air to my hot tub video

I took mine apart and the shaft was not broke. It seemed like it may have been a bit dried out by the rubber bushings it fits into so i took water based lube and lubed the whole shaft and rubber bushings and put it all back together. I also think there may have been a bit of debris in this area from when I had to super glue the filter housing back together a couple times and it may have been a dried piece of super glue. Anyway it works now with no parts replaced.

Can you come to my house? I don’t have any bamboo sticks

Hi thank you for this video. I removed the plastic but it left some dark spots like a stain that is not coming off, how do I remove that stain? Is it permanent?

Amazon sells all the washer rings and the mushroom intake seals, which was why my pump was leaking. I ordered a set of two and fixed my pump.

I just wanted to take a second to thank you very much for this video. Fixed the problem perfectly. You are awesome sir.

Anybody know where i can get the filter housing for a fair price?

Worked perfect! Thanks for the video saved a lot of money!

Thanks for sharing, I will give it a try, unfortunately the part will take more than 1 month to arrive.

Same as intex purespa but this one looks alot easier! Got my intex to run for another 6 months by just taking the impeller out and back in? Dont know why that fixed it?

You saved the day my good friend ! properly axel broken, replaced and now, as good as new 😀

Do you think the steamer would help prepping old electronics with finished plastic cases? Or is it only really suited to material that peels and is stuck with adhesive?

Thank you! You just saved me 400 dollars. This fixed my egg

Thanks , really helps. Going to try it

Thank you.! It works.

I love to watch how to videos, but I sure could do without all the "point out all the screws and then show me how to use a screw driver to remove each and every screw". I do not need the filler in the video. All I need are the main points. It's rather dull to have to skip thru a video! It just makes it D U M B.

Thanks for the video!! Very helpful. Thought I was going to have to toss this thing!

Is this same part for the coleman saluspa ?

Awesome job! You managed to get this fixed for pretty cheap. That said, those of us out here that don't have $750.00 worth of gear will probably have to spend the $60 - $80 to buy the replacement. Since you have all the gear you should probably offer your services to fix these things for $25 plus shipping/handling. Make some of the money to pay for all that cool gear and help us run of the mill guys save a few buck too.

Mighty Helpful. Thankyou so much.

Good job

Thank you from the UK for this video. The E02 fault was coming up often on my pump and driving me nuts! Just got my new Impellor and seal kit, so hopefully it will be as easy to replace as you made it look.

thank u so much for leaving link for part I have the newer pump blower I'm assuming the same pump is used... I need an impeller for a spare ... also never run unit dry the ceramic shaft will break immediately

I did all that and now it won't even turn on. Any ideas? Thanks!

Even brand new it's a pain in the a$$ to get that sh*t off. Whoever invented it is a f**king moron.

I left the stopper cap on

Thanks John- this fix worked like a charm! The kids are very grateful to have their pool back in working order. 👏

This video helped a lot. Thanks 😎

Merci très bien expliqué...! on va vérifier cette possibilité :)

Thank YOU!!! I almost bought a new motor for $$$ because I love my hot tub. But wait a minute, I couldnt find a new one. Then I found this amazing video. My ceramic spindly thingy was broken just like yours in 3 pieces. Ordered the replacement from your amazon link, installed in minutes and tahdahhhh! Working just like brand new for less than $15 and 15 minutes. Coleman Saluspa tahiti. You're the best!!!

Why not just remove the pump to strip it down

I hired this for 5 days and I’d showed the error code after two days. What a pile of 💩. The build quality looks terrible.

How come water is not pouring out the air bubble hole because if I unscrew that pipe on mine the water flows out ,regardless of having two black caps on smaller pipe holes ?

hello, good job. impeller is ok for spa intex ?

Thanks for sharing, going to try this soon

Seems like the lifespan for this light is about 7 years, mine went out recently.

I am also well versed in the operation of these bots. Mine was coding 02 because that little flange in the water path if the white plastic section under the flow sensor, has an encased steel button that gently fixes to the magnet. Mine was dirty enough to require cleaning it. After which, it stopped interfering with flow. The axle that it hinged on was also so weak from age, if crumbled. I replaced it with a short bamboo skewer and snipped the excess. Working perfectly many months later.

Thank You I am going to try that! Just wanted to let you know it worked but I just had a hair dryer, still all came off in just a little bit of time 🙂

My shaft wasn't broken it was the plastic itself that houses the magnet. Replace it anyhow. Its much quieter now. Have had mine for 3 years until this fix. Also if you need a hack on dirt on the bottom of your hot tub...i use a swifter duster with the fluffy pad slowly place it to the bottom and slowly run it across the bottom. slowly pull it out rinse and repeat. Works awesome. May have posted that before but good hack.

Water kept coming out of the larger hole when I put the two stopper caps on. I had to empty the spa.