วีดีโอ

Can I use this device for protection purposes, such as overvoltage and undervoltage protection? For example, can I trigger its contactor if the phase voltage exceeds 240V or drops below 200V?

Hey I know this is an old video, can I set this up to control the smart plugs? And also 1 tap does one and 2 does another plug? And then 3 taps to turn all off?

Hi All, I just bought 4 of the Skyfans with the tuya module and for the life of me can’t get it to connect either. Has anyone worked out how to connect the original module with the app? Seems like there one simple step missing in the instructions.

thankyou, it was nice watching! 🟢

Ahhh - why didn't I see this before I bought our new fans 6 months ago! I am using RTL-433 with our Lucci brand fans. While it works, you have to capture each command for each fan and if you send an "off" command when the fan is off, it toggles it back to the last setting, so you will turn the fan back on! This is much more elegant.

Thanks a lot for the tip! I drew beautiful dashboards in grafana that consume electricity for my ps5

what is the difference bewteen 3 phases wiring scheme and 1 phase wiring up ? I mean you wired it to 3 phases but you could have wire everything to only 1 phase

Me puede traducir en español

@skarkyjames, are you still using these? are the modules still available?

Very useful, right on what I am spending 2 hrs for 🎉🎉

Crikey that's a rough job. Do they not have spanners or sockets down under ?

Friggin Champion Jimmy James

Do i really need to install the transformator boxes?

Great video, thank you. Saw you have Sonoff SV to control your garage door. Seem you use the GPIO4 (purple wires) & 14 (green wires) for the Reed Switches. Wonder you have video for it. Thank you.

G'day, great video and thanks for the tear-down inside of the unit. How well is this sensor working 2 years on?

What about single phase?

I change my internet provider. I cannot change the password. I wish I never spent so much money on this trash product.

Hi James Can you share how the supply Ground is seperate from the Mosfet Ground? And can you share whats under the 400V Capacitor?

Hi James, Came across your videos, you are in Aus and wondered if you have a video with a shelly 1 with 2 way switches? I keep finding US videos, but i think their 2 way and colours for wires are very confusing to relate to Aus

LOL…. Nice multimeter… it is the same as the Greenlee DM510A … (both made by Brymen) !!!

Cool project, but I’m more interested in how you got 3ø at home 😍

Solution for "No permissions. Your subscription to cloud development plan has expired": -Click on cloud - open your Project - Service API - IoT Core --> View Details then extend trail period --> fill in the information DONE! :)

Yeah plug it in and bam.3 hours later with a terrible app tuya

do these modules come pre flashed?

I started with the Bunnings WI-FI smart switches and after too many issues moved on to Zigbee. Zigbee is a much more reliable standard which will continue to work if the WIFI is down.

Thank you so much - this has helped me no end

We miss your content Jimmy James!!! Come back soon!!

So what’s it called? Would love to find one!

wondering if anyone has tried this recently, be keen to know if these dramas still exist?

well, I feel like an idiot. I do have the brilliant smart fan. brilliant app, all setup in that app. Then when I try to add and link Tuya App via the QR code, it doesn't complain but it doesn't sync anything. Now I've installed Tuya app on mobile phone, created the account but haven't added any devices (btw looks identical to Brilliant app) and when I scan the code it does recognize it immediately (the login, the devices are just not there yet). How can I can the devices from brilliatn app registered in the tuya app?

Any update in regards to the Tuya dongle and HA integration? Also, do you know if this will also work with the Ventair DC3 fan?

Hi, Tuya local automatically detects that the fan is a Treatlife DS03 ceiling fan and light. but this does not work, any tips?

Hi there. Living in Perth and wondering if could connect this type of dimmer to an Led downlight from Beacon Lighting - LEDlux infinity Maxi sku 170618 ... they show their dimmerLucci Power 150W LED Electrical Push Button Dimmer( quite expensive around 80 bucks) but no wifi whatsoever .... did not buy for that reason. they recommended another dimmers but with no connection such clipsal 31E2RUDM or Diginert led smart MEDM. just wondering is could give some inside if could use this DETA Grid Connect dimmer with this downlights i bought. Any comment would be appreciate or othiwise great to listen your views in different products cheers odama

Pretty cool sharing this info. It’s gold! If I needed to use this Shelly to control a 240v single phase heating element via a definite-purpose contactor, you’re saying I could? In this case can’t install it right at the circuit breaker and may not have 3 phase to input into Shelly. Not really a dealbreaker right?

Is the kWh useage not easily viewed? just Amps and Voltages?

Cool. I only have one device detected - the gateway. In iot tuya, only the gateway has the key. For other devices "local_key": "",. What could it be?

where to buy those push buttons?

Hi mate, do you think it will fit into a 4 gang standard plate..? Also, any ideas about ducted aircon wifi control other than Airtouch... Cheers

Are you getting a gobbie while filming yourself talking?

I just checked your site, these didnt become an eventuality?

You should keep in mind that the 3EM has a poor power supply design, that can blow up on a 3-phase 400V system (as we have it most over Europe). Any surges on the lines might blow up the 1000V diodes used (remember you might have the rectified 320Vdc against a -320V phase voltage on ever diode. 740V is not far away from the diode‘s max rating. In addition these are smd diodes with very limited space for these voltages. In case of a failure they create arcs on the pcb and with some luck only fill your distribution box with black mud. Make sure you have fuses in front of the 3EM or better/and surge protection circuit. BTW, they changed that in the 3EM pro to only using the Vc-input for power supply to minimize the „between phases arc“-risk.

Dobry poradnik i działa. Potrzebowałem lokalny klucz a tu dowiedziałem się jeszcze jak odczytać parametry i jakie dane oczekiwać.

it's possible obtain local_key if the account is expired after one moths? i btaine this message ""No permissions. Your subscription to cloud development plan has expired." there are some mode to have local_key?

Thank you, you are the only one who got deep into fully kiosk and not only explaining the basic <3

Can’t find these on your site

Hi Jimmy, Good work.Is it compatible with Hunter systems as well?.Rgds Nava

This was the most straight forward and easiest video to get this info, thank you!

I have this "Data centers inconsistency, App account cannot be linked." :(

Nice video. Thanks, I believe you will find Shelly have added Kick Start to their interface :)

Just a note to say this is the only video ive found that helped me wire a simple reed magnetic switch and config in esphome as my very first project without confusing the hell out of me . You wouldnt believe how confusing some of the beginners guides are. !