วีดีโอ

How often does it need to be emptied out?! And does they throw any CELs

I have a 2005 GMC Yukon, XL, which has a bracket already for the battery should work right?

Will this void warranty?

Awesomeness 😊

This video is very interesting and in using oil separating setups on my vehicles, this seems like alot of blowby. I installed a separator on my 2005 Chevy Silverado 5.3L with 256,000 miles and it does not produce/collect this much yucky fluids. 😮 I have to be honest, and this is merely my opinion, it is alarming to watch the video as the fill rate seeems a bit extreme, especially on a new engine. In closong, excellent work as the video docuemnted the mieage and the oil separation intervals, very well. 👍🏼

I just placed an order at the J&L website for my recent purchase, a 2018 Ford F250 Super Duty 6.2L. This is my first add-on upgrade before I drive it another mile. I have used other oil separators over the years in other vehicles. The concept is the same but this setup looks very "trick" with the plug n' play fittings. Gents, don't wait another day, get yours today. Your engine deserves it, you deserve it. Do it!

Maybe somebody could help me. Would this cause oil to leak onto the pcm? Also ford wants to charge me 1400 dollars in labor for this job. Does that sound right?

How about a 25 CX50 2.5 L non-turbo? Also, would this void a factory warranty on a newer car? Thank you

thanks

What is this for? I have an S series.

Please... can you upload a video of how to do this one turbo one mazda 6 grand touring or if can't send me a link I looked for on many places and couldn't find so if you can help me I will highly appreciate that... Thanks brother

Thanks for taking the time to make this video. Just got my wife a 2015 Mazda CX5 and this screenshots was great . Wish I waited for the newer GDI engines that don’t need catch can because it has dual fuel injectors to keep the intake valve clean like ported engines.

Just a note the alternator bracket has 2 threaded holes I drilled an extra hole in bracket to mount it more securely

Is it too late to install one on my Bronco now that is has 22K miles on it?

Great install video. Looks a bit challenging to remove it to drain it. How about a video on how to drain it?

Are there any oil catch can for 24 colorado Z71

Can you pour back the oil from the separator back in the engine ?

I just installed mine today on my Explorer ST. It took less than 15 minutes. This kit is so well thought out and has a great aesthetic!

Can it fit a 2023 dodge Durango?

Definitely getting one for my '18 Sport! Informative video. Thanks!

Is there for mazda6 grand touring 2021 ???

Wait. So is the male hose the inlet for the can, and the female hose the outlet, or is it the other way around? Thats all im confuse about

Fantastic video. It was exactly what my setup was and was able to mirror it in exactly. Very helpful.

I just bought a 2024 Nissan Frontier Pro 4X, will this void my warranty by installing one of these?

Do you just unscrew the canister and dump the oil in it when it’s full?

I installed one of these and the fitting for the can hose, under the intake refuses to come off. What’s the trick? The factory one came off with zero issues.

Gow does this compare to a dual catch can and if that is better do you offer one?

I don't care what kind of grease you use....those damned hoses are a bi tch to get on the can side of the house, sure not as easy as your video makes it look. I give up for today, will work on them some more tomorrow!🤔

Super easy. Just installed one on my 2023 Scat Pack. 😎😎😎

After watching the 19-21 video & y’all taking off the f/d tire & the wheel well rubber liner…. I was VERY relieved to see this video!!!…. My door sticker is 9/2021…. So I checked under the hood & thank God🙏🏼, I have the top PVC connector & no engine cover!!… I just installed one on my 2017 Mustang GT, loved that it took 2 minutes!!… Now I’ll order one for my Ranger Lariat Tremor!!!… Thanks & God bless y’all 🙏🏼🇺🇸

Phenomenal design!!… Literally took 2 minutes & didn’t even need to remove my strut tower brace!!… Just unclipped the “5.0” engine cover & replaced the line with the catch can!!!… So much better & easier than my Raptor where I had to install a bracket on the battery tray!… Be well & God bless y’all 🙏🏼🇺🇸

From what I've seen this is installed on the wrong side in this video. That side is the breather hose. The pvc is the right side and goes back towards fire wall. I've heard it should be installed on pvc to actually benefit from this

have you even pulled the intake to inspect how this is performing with intake valves?

What the fuck. This is complicated as shit. The v8 is like two bolts and 10 minutes

Please explain the purpose and benefit of this device. Thank you

Does this work on a 2024 Ram 2500 6.4l

How exactly do u check it? Unmount and dump it or is there a release valve to drain it?

I just purchased one of these for my 2018 Ford Edge Sport 2.7L. It currently has 45,000 miles on it. In your experience, should I get a manual cleaning of my valves after installation to remove what is already there?

Boy Ford really screwed up, making it so friggin hard to do this. Why not do it the old way. PVC valve on intake. BULL SHIT!

Total install time start to finish? About a hour or so? Thanks.

I'm sorry too much friggin work! Why put the PCV valve there and not on the valve cover where it used to be?

This was one of the first mods on our new Ford Transit. There's a lot of blow by with the twin turbo EB engine. Depending on driving conditions, it gets emptied every 3,000 to 4,000 miles. Doesn't seem to accumulate as much when mainly highway driving. This separator unit, along with regular (full synthetic) oil changes should help prevent premature engine failure.

Hope he’s checking oil level 😂

Just installed mine for my 2025 Frontier Pro-4X as the engine bay is exactly the same as the 2022+

Nice

Didn’t GM already install a 2-phase oil catch can and separator on the 2.7 T silverados?

Question, wouldn't the single turbo ecoboost need the 2 inlet catch can with the 2 check valves, because it's got 2 distinct lines flowing, one when the turbo is not running and the other for the turbo? Could I install 2 catch cans without the check valves, one for the pcv as shown in this video and the other for the turbo?

When I opened up the hood, I could easily get to the air intake port without removing the air box. Is the reason you remove the airbox to make it easier to see on video?

what is the hose diameter?