วีดีโอ

Your video answered all my questions, you where about the 10th video I watched, no lie, i wondered if you could change that when it's all the way out, nobody else has done that on electric that I've seen, excellent job and very helpful, thank you so much. I was yelling at the TV when you set up on that spring loaded side cause I watched so many videos I knew what was coming, but just an honest mistake and I make plenty. You seem like a great guy thanks again. 😊

This does not work for next generation air firier as the mesh guard is now part of the upper cover and cannot be detached separately

Hi Keith, Thanks for the video. I have had similar problems with pairing Icom BT to the car audio. Try pairing the other way. Let the Icom announce it's availablity for pairing and let the Buick find it. It still may not work but I have had some success. 73, Ian.

How did you cut off the top of the transom?

How many 5 gallon buckets did it take to do the transom.

How much did you use

Great job I’m going to replace the spring side arm assembly this video did help Thanks

HarborFright indeed.

Nice! Good Job! Thanks

I have fallen down the HOME FREE rabbit hole- no parachute needed or wanted! Love these boys!

😻 "promo sm"

Got it fixed! Much appreciated 👍

Breathtaking love my Boys..🏡🆓🏡🍟

Hey there buddy, great video, thanks for sharing with us. I'm getting ready to replace my awning fabric for a second time. I'm thinking of using your technique this time around. makes the job look a bit easier. I have a fifth wheel rv, and my awning is up high, so being alone with no help, well that height does make the job a bit harder. Nevertheless, I'm sure I'll be able to do it again. So, hope this finds you and yours doing well. Safe travels always, and happy camping. I've subbed your channel, Thumbs UP 👍

It looks the same as the carbon core

Arjay 6011 is beneficial as it will probably never rot, however, it's tensile strength and weight should be taken into consideration. At 1.4 to 4.2 K psi tensile strength (9.65 to 28.4 Mpa), its not as strong as Marine ply which is normally over 50 Mpa, but the weight of 7.65 Pounds per U.S. gallon is around 916 Kg per metre cubed, which is considerably more than Marine ply which is normally around 430 to 480 Kg per meter cubed.

Very useful, thanks.

You wound it counter clockwise the first time no clockwise

Can you use steam cleaner?

How’s it holding up?

Yes! Thank you!!! I bought the husky 8 piece, folding tamper, proof, torx set. It looks like a set of Allen wrenches. (T15) the tool itself is shaped like an 6 point star with a hole in the middle. I bought mine from Home Depot.

Thank you so much for sharing this!

Glenn and I just saw Home Free's Road Sweet Road Tour in San Diego. It was our first concert by Home Free and we were NOT disappointed! So much fun, great music, fabulous harmony, laughter and a very special night. We will go again. Don't miss your chance when they are close to you or make a road trip out of the experience.

Hey Keith and Sharon! Love your fish pond! Beautiful fish! 🐠

I have loved music my entire life and I can honestly say that I have never heard another band sound even close to the quality as Home Free. They are the best. And I can listen to them for hours and it’s never enough.

Where I can buy all the liquid for the repair

Thanks for sharing this with us.. I absolutely love Home Free but don't get to many concerts so I really enjoy watching the videos from others.

Always AMAZING!

How many 5 gallon buckets did u use for that boat if i may ask

Yes of course you have to buy the correct tool or socket etc.. however you definitely have to have the mechanical aptitude and be very careful I would have preferred to take the heating element out as well but I don't have enough information on that because if you can get the heating element out you can really get the fan clean so all in all it came out very clean after I was done put everything back properly and then cleaned it with lemon juice one more time and it looks a lot better you don't want to disturb too much when cleaning it

Okay I use the torxs anti-tamper socket plus a quarter inch Drive ratchet.. took off the grill and scrub that down lightly with a brass wire brush (on inside only)to get into the nooks and crannies Behind The Shield.. then I worked on the inside of the fan area excetera with Scotch-Brite .simple green and a combination of lemon juice but the Scotch-Brite was the biggest trick especially if you use yours as much as I do but I do not cook sauce in it The Source makes a mess in the fan I do everything but sauces in my machine.. Pistol Pete da Boilerman..NYC

Actually there Torx anti Tamper proof type sockets for anti tamper etc ...if u notice the little metal tip inside torx screw

Great Video Cousin, nicely done! Enjoyed Watching! Venetia

Fan looks really clean now!

nice yorkies!, how's your transom holding up on the boat? I'm thinking of doing a pour-in job myself.

FLUFFY yorkie 🐶🐶🐶 great video, very CUTE ❤❤❤❤❤❤❤❤❤❤ A big hug from Yoshi, the little yorkie, woof woof 🐾🐾🐾🐾🐾

Thank you for the taste of what I should be hearing in just over a month. Counting the hours.

Thanks for sharing... it's as close as I'll probably ever get to seeing them live. Here at this late stage of my life, I have a burning desire to see these guys. The only other artist I had concert designs on was Elvis.

We were there as well. Going to see you all again in Shipshewana IN in July.

Thank you for sharing, I also love Home Free.

Thank you so much for sharing. Those of us who've never gotten to see them live absolutely love how good they sound live! ❤

Great video! Saw them last week in Chattanooga. They are awesome!

Thank you. .. very useful

My wife and I were there it was a great show even with the technical difficulties they were having. Looking forward to seeing Home Free again. Looking forward to going back to the Mule House for more shows in the future, such a great venue.

Thanks for sharing! I got in on the Livestream too and it was great! I just found these guys on YT a couple months ago, and fell into the rabbit hole.. I guess I had been living under some kinda rock, lol. You did a great job recording this and seeing story time again made my day! Thanks again!!

Love them all. Thanks for sharing☺️

Attended this show and the Chattanooga show. Both were great! Thank you for posting!

Watched the Livestream - would have loved to have been there, but this livestream was a God-send... My first Home Free concert and it was even better than I anticiipated! These guys are beyond awesome - loved that they acknowledged the folks watching on the livestream - definitely made us feel like we were there with everyone at the Mulehouse! <3 Thank you so much for sharing this video! <3

I watched this on "Livestream" in the UK at 2am & loved every single second of it. I actually felt as if I woz there in that hall. I loved that Tim acknowledged that there were "Livestream" viewers frm around the world watching so that made us feel loved & appreci8ed & U can't help but love him back 4 that, in fact U can't help loving them ALL & I think we do no? Apart frm the little tech hiccups at the start that woz 1 AMAZINGLY fantastic show & it has made me want 2 C them live LIVE all the more now wherever & wenever that may B so thank U 4 sharing ur video & bringing back a memory that I shall never NEVER 4get 🙂

Thanks for sharing. The video & audio was really clear.