วีดีโอ

Please send connection diagram of timer

Is it disconnects both wires L&N with the relays? Can it stop restarts if 2-3 consequent overcurrents faults appears?

Hi where do you connect live and neutral in this device?

Wich one is alternative power

What is the difference between this and delay off, they seem the same to me. Does delay off have to be reset by the switch? I have the M1 set to interval on, but it has stopped working, I would just buy the simpler B1 version if it does the same thing.

It’s apparently not clear how this thing connected

So in order to do this you have to buy another relay? Im lost

We can’t see from this angle what are you doing 🤷‍♂️

Very misleading video, you could do better job. Why not to do slowly and with explanation what goes where.

Can it be used with solar panels or DC power?

what is the green part that allows for 4 wires ?

Thank you for the very helpful explanation. This helped me out with the Time Delay function. 👍

Hello 👋, Can this be used with NC push button instead of NO

Hello. My Geya g2r (Automatic Transfer Switch) sometimes fails to switch to backup power from the inverter in automatic mode. It switches to the main grid perfectly, but when it comes to the inverter, it only works occasionally. It seems like the coils don’t have enough power to activate the switch!

No mention of contact 12...... nice work.

Contact no daal do sir

Great product

Fantastico !!!!👏👏👏👏👏

Failure unit....

How do you controll the Time intervals... If you want the timer to supply for 10 mins & stop for 5 mins.. Repeat this sequence until you switch off the supply.... where do you place the functions

Can you controll the Time intervals - meaning it's must supply for 10 mins and switch off for 5 mins then repeat that sequence until you switch the supply off.. How do you select the functions

Is it possible to connect a 240 V AC or 24 Volt DC source to the module? Is there a difference in the connection method?

Hi Geya, have you got a video on how to wire the THC-30B or similar unit please? I purchased one to control the lights for my chillies and future hydroponics (hence the 30A) Also, what MCB do you recommend to go with it? Thanks 😃☮️🌶️🌶️

what relay i need order if need motor ON and then push motor OFF then motor OFF start time xx pump OFF. need my water cooled spindle motor relay who stop pump after 5-10 minute after spindle motor has OFF then time xx pump OFF

Is it configuable? It's typically important the generator have a short period to stabilize before the load is actually transferred, and a cool down period after main power is restored.

I have GRT8-EC over aliexpress, today i instaling it but in delay off mode shuts off instant,problem help.

what relay model need buy if need, my VFD spindle motor 2,2KW use VFD ON/OFF turn motor, and then if OFF motor pump stay ON time xx and then pump OFF. i use VFD ON button (green)momentary, and OFF button (red)momentary, and need if motor ON pump ON but if motor OFF bush button pump wait xx time and OFF. what GEYA relay model need buy ?

not good, i need if motor turn ON, light go ON ,,,,,if motor turn OFF light wait 5-10 minute then light OFF. what relay need use ? looking what relay need buy aliexpress what GEYA model relay need buy ? i need use spindle motor ON/OFF VFD bush buttons start/stop and then pump motor follow motor but off need time pump closed x time

what relay i need use have off time, if motor bush off then time x and then light go off. time about 5-10 minit. mean bush motor ON led is ON bush motor OFF then wait time X and then led OFF.

Modesto Flats

What are the results?

stop switching on and off all the time 🙄

I have two LifePo4 batteries, Basen Green 11.7kWh 51.2V (BG), and Ecoflow Delta pro - inverter 48V 3.6kWh (DP). I use BG to charge a DP battery via XT60 solar input (400W 8A). With the DP application, it is not possible to set the BG not to be completely discharged? Would be such DC Voltage Monitoring Relay and Undervoltage Protection Relay suitable for my batteries? Can I put it (and how to set it) between the batteries so that voltage limit (under 50V) will stop charging DP from BG battery?

I have two LifePo4 batteries, Basen Green 11.7kWh 51.2V (BG), and Ecoflow Delta pro - inverter 48V 3.6kWh (DP). I use BG to charge a DP battery via XT60 solar input (400W 8A). With the DP application, it is not possible to set the BG not to be completely discharged? Would be such DC Voltage Monitoring Relay and Undervoltage Protection Relay suitable for my batteries? Can I put it (and how to set it) between the batteries so that voltage limit (under 50V) will stop charging DP from BG battery?

I have two LifePo4 batteries, Basen Green 11.7kWh 51.2V (BG), and Ecoflow Delta pro - inverter 48V 3.6kWh (DP). I use BG to charge a DP battery via XT60 solar input (400W 8A). With the DP application, it is not possible to set the BG not to be completely discharged? Would be such DC Voltage Monitoring Relay and Undervoltage Protection Relay suitable for my batteries? Can I put it (and how to set it) between the batteries so that voltage limit (under 50V) will stop charging DP from BG battery?

The product could be great but the video presentation and explanations are very very poor. You need to show the schematic of what you have done. Explain this correct usage and how this needed to customer. Explain additional usages and how I as a user can use this device. You left quite lots of topics not covered. I can only guess what this product is capable of. I'm not gonna experiement until I 100% sure I need this and this is exactly suitable for my application.

i'm looking for something like this but with a breaker protecing the load. Something like a 20A breaker

Tromp Mills

Prohaska Cliffs

Garry Brooks

Geraldine Trafficway

Rath Summit

Dietrich Court

150 Natalia Union

958 Cornell Point

35279 Kirlin Place

535 Williamson Cove

i can set full year time 44 channel?

Margarett Avenue

Wayne Terrace