- 2
- 85 950
dlandscapes
เข้าร่วมเมื่อ 1 ก.ย. 2010
Kubota G23 Mower - Disfunctional
Kubota mower showing how it won't work effectively on wet grass
Part 2 here th-cam.com/video/pKNZgFrVXOA/w-d-xo.html
Part 2 here th-cam.com/video/pKNZgFrVXOA/w-d-xo.html
มุมมอง: 80 272
You're asking the impossible. There's a load of clover in that grass. Clover isn't easy to collect at best of times, never mind when it's drench wet as per here. Your forward speed is too fast. Try raising the deck 1/4 or 1/2 inch. Then do a second pass. Have you checked blade condition, are they sharp? As that will make a difference and also you're ploughing on when the noise should be telling you thr chute is starting to plug. Have you cleaned and polished up that chute so that material doesn't stick to it. It's your choice that you're going in such wet conditions so make sure you're doing everything to give it a chance
I'm looking for this type of mower machine any dealership in middle east
Problem number one, the deck is absolutely filthy and blocked with grass, needs cleaning out, then you shouldn’t have a problem, lack of maintenance and care thats all thats wrong with it, in my opinion its a difunctional operator
Wanka, it's too wet, plus your blades are probably dull as fuck.
You had to set the maximum engine speed of the kubota
When I push the clutch in and push the blade lever down, my blades will not engage, can anyone help me, thanks
normal, it's too wet !!
Contractor should have raised the cut as lawn was too wet to cut normal height
My g26 is fine in wet
+Toby walker Lucky you. I have the same problem as this guy, mine just blocks up!
Oli, I planned on upgrading my GR1600-II (excell. machine but insufficient ground clearance for my use) to a professional G23 LD .I researched and read about all the G23/G26 problems collecting damp grass. I see that Kubota solved DLANDSCAPES and FOXISQ problems by installing new blades/other parts and assumed that was the High Suction Extreme Wet Grass Kit.The brochure shows the new G23-II/G26-II with different deck # and jump plate to clear blockages but is not available here yet (Belgium)
And now with this kit, it's Ok for you ?
Thanks, And where can I buy it, on ebay? Have you got an adress for me ? Thanks for your help oli
For the new G23-II : High suction extreme wet grass kit for G23LD & G23HD Mk. 2 only, W21TK00060 £44.00 £52.80 For the old(er) G23 : High suction extreme wet grass kit for G23LD & G23HD Mk. 1 only, W24TK00247 I found this info on the internet but would like to know what exactly the set consists of.
High suction extreme wet grass kit for G23LD & G23HD. W24TK00247. £58.00.
Hi, Where can I buy the special blades for my Kubota G23 ? Thanks for your help oli
We pay 2 much cash for machine to be puting up with this cind of nonsence.The mower looks good any machine can have teding problems its a pity kubota h q truble suting abillity are still as good as ever.How long now does it take to get an od ball part
We have a G18 and a G21 High dump great in the wet got the G23 out on demo cut side by side with the 21 same problem filled the box on the 21 but just a wee bit off grass in the box and blocked up on the 23 plus you have to get off to unblock it not like the 18 and 21
Slap on a beacon and reg plate you'd have your self a minge mobile. Trust me
I was going to replace my G21 with a G23, but now I am not so sure! I will ask my supplier (here in France) if they have the mods, if not, its off to ISEKI......Steve D&S Property Services
this vid show exactly the big problem of G23. I also have one and its a fucking horror with wet or long gras, like this video shows!
not by the looks of it but it shouldnt block like that even though im after hearing of a few complaints about the g23
nice 2 know about this problem my G21 can cut way faster and longer grass even in wet i dont know but i think there are only 2 blades on the G23 and maybe this is why the grass is not been thrown back into the box as quick