วีดีโอ

@charlieauxilien3396 boosted anything makes the best music!!!

@ismaellopez3860 yes, this is a 02 GMC. Any 99-06 vortec

@Modified1 thank you so much just recently have this problem

@ismaellopez3860 just make sure you go back with a quality brand of knock sensor. I've gone through 4 different pairs to find 2 that stay around 100ohm when hot. I was having a hot/cold problem. Ran fine until it got to operating temp then P0332 code and no power. The sensor would ohm in the 60's hot and 99 cold. So be sure the sensors are good, but this block makes it easy to change until you find a good set.

@astorrodriguezlopez this was my 1st rebuild in 20 years!! We both learned a lot, and it works perfectly!!

Trying to get him into mechanics instead of video games.

Thank you for commenting on my video it really helps my channel out!

@jerrymcbeath3192 I am pleased to say that after more than 2 years, there are no leaks! I've replaced the entire headliner and double-checked every rivnut and antenna repair. The factory rivnuts are encapsulated on the ends, and the extra sealant doesn't let any water past the threads. Thanks for commenting on my video!

This is a beast of a suburban. I like it way more than I thought I would. I'm happy to help, I didn't think anyone would watch this, but if it helped, I'm glad I made it! Thank you for commenting on my video. It really helps my channel grow!

It does congest traffic for the week.

Thanks for watching my video and commenting, it really helps my channel

@krzysiekv12 I'm not exactly sure, but I haven't had a problem yet. I also wear out a set of tires in a few years. The best thing I've found so far is the off brand baby soap/shampoo, the gold one. In the video, I was just using the closest slippery stuff I had.

@ thanks for the video. I have ordered myself a cheapish set too, a bit different balancer but hopefully easy to use

@krzysiekv12 The instructions are crap, but the customer service was great. Thank you for commenting on my video. It really helps my channel out. I'm sure you'll learn the balancer in no time. It's one of those you just have to mess with it a bunch things.

@Masivao-z3p eBay on clearance, I paid $600 for the set, and unfortunately, they don't make them in this bolt pattern anymore. 20x9, and they also made a 20x11 too. I just bought the same wheels for my car hauler, so Vision still makes them, but last time I went to their website, I couldn't find 8x165.1 bolt pattern but they still make the Vision 390. That's what I did was get the part# off of Vision wheels and put it onto eBay and hit lowest price + shipping, and I got the last 4. Thank you for commenting on my video, it really helps my channel out!

@@tammyforbes2101 lol, hell yeah!! Me too!

@Wicked_RotF30 I like mine way more than I thought I would! I've pulled ups, fedex, and Amazon delivery trucks and a 2500 diesel 4x4 lifted ram out of the ditches around where I live in SE Louisiana. The Amazon truck I pulled out was on a gravel driveway, but the 2500, 8.1, 4x4 in 4 low didn't even spin a tire, and when the converter stall tightened around 1500 rpm, they all came out effortlessly. Mine has been lowered 4/7 and looks like a 1500 and always surprises everyone! Lol, yep, love the Gangsta Burb!!

@JGarcia2016 Yes, exactly 💯!! I've wanted to do that ever since I put them on. Thank you for commenting on my video. It really helps my channel grow!

@@RoustAboutBHC It was a while ago that I did this, but I believe it was a 3/8 Grade 8 course thread 3 inch.

@@RoustAboutBHC 2 1/2 or 3

@@MatthewPWeber lol that's awesome!! And so is that chevelle!! Thank you for commenting on my video!! Made my day!

@vladpootin5973 thank you!! It's come a long way from when I got it 2yrs ago.

@jameswilliams2436 Damn close, 4.8 vortec Chevy Truck engine and a Truck Norris Cam

@willstansbury3747 Thank you, and yes, it's about the cars making the soundtrack. That maroon coupe across the road though 💪🏽💪🏽

The 07-13 style is what we went to on this '02 they were under the intake, now on the sides like a 07-13. I don't know if there's a harness connection, but we changed ours to be like yours from the factory. Where are you thinking to relocate them? I think yours are in a good place.

We had extra on the harness we got off of Amazon. I'm not sure why yours is short. Both sides of our harness were equal length and around 4' you could also run the harness in front of the heads and down, they wouldn't be all up in the exhaust that way and might make it.

The stock pipe is a 2 3/4 inch. We went 2 1/2 after the converters. The 2.5 slips right into the 2.75 and welded it up!! 2.5 comes right out of the manifolds and the use 2.75" so when they bend it the pipe is 2.5" in the bends because they don't use mandrel bends from the factory. Thanks for commenting on my video. It really helps my channel!!

Yeah, I had to figure out a few things on my own with the broken English instructions and grease it myself too. Thanks for commenting on my video!

Thanks, I'm glad you appreciate the content, that's what it's all about!!

1st week of October on the Mississippi Gulf Coast is my favorite place, Cruisin the Coast!!

@@fallenone6 220 to knock down, 400 before paint using paint and primer paint

@@SakibAhsanTamim-p1t Please let me know what problems you see.

@@Modified1 check

Once you've done it 30 times on the same kind of truck, it ain't so bad. Thanks for commenting on my video. It really helps my channel grow!

New to videoing, editing, and new camera. Thanks for leaving a comment! We're new and learning what to do!

@EGGINFOOLS That was a year or two ago. The Gangsta Burb has come a long way since then, and so has the editing and videos!

🤣🤣Murica!!🤣🤣

@willstansbury3747 thanks, I'm done listening to the professionals and adding music and pop ups everywhere.

@@Modified1 the best classic car videos have nothing but the sound of the cars and the atmosphere of the event keep up the great work

@willstansbury3747 I agree, just as long as youtube doesn't copyright me for having it in there. A lot of times, I have to put music in over a muted segment to fill in the quiet from a copyright clip, but otherwise, I'm not adding anymore music than I have to.

That dudes middle name must rev limiter!! Thanks for leaving a comment!!

@jimgordon3206 yep on the back or front of the heads or with a few hardware store adapters on the sides over the manifolds 10mmx1.5 pretty much anywhere a 10mmx1.5 hole in the block is. Make sure they ohm properly at temp. I've had a few when hot loose impedance and throw a light

@@Modified1 Thanks for the prompt reply.

@jimgordon3206 thanks for commenting on my video it really helps my channel!

Isn’t there a spot on top of block for the brackets

@TRTR-ti6yv maybe they make one for that, we didn't look. We just bought the blocks from ICT for the under mount style. Sorry I'm no help with your question.

There's multiple 10mm x 1.5 holes you can mount to. Heads or block, but no drilling or tapping.

@@gurdeepranu1481 hell yeah!!

$27 on Amazon, gen3 knock sensor relocation harness.

@@Robert-x7w2y like real hard!!

I had destroyed my 4.10gears in the 8.5, 10 bolt and had an open diff 3.23 spare. The 2006 silverado is on 35x10.50r17. So I'm sitting at a bottle neck red light 2 lanes into 1 and a yellow '08ish Mustang GT pulls up...long story short it shifted into 2nd at 75mph and this happened....

@baldandbikes4373 I know right!!🤣🤣🤣

@AnthonyDuran-l1f I bolted it down after the video. I didn't have any problems with it before or after. I wasn't sure where it was going to go in the video. Great machine, btw haven't had any issues.

I picked it up at the terminal in Brookshire,TX. I live just north of New Orleans, LA. Fortunately, I have a good friend who runs hotshot, and he had a run going to and from Houston, and that made the trip happen.

@kylepawelczyk163 the bucket did, but no paste or brush. I use baby shampoo and a paint roller 1/2 wrapped with electrical tape for a handle. Lol cheap, but works awesome!

@@Modified1thanks! I used to mount tires in high school and we used Hunter paste. That stuff is amazing and lasts a long time!

@kylepawelczyk163 Awesome, I'll have to remember that!! Thank you for commenting on my video. It really helps my channel!! These machines were cheap compared to the other on the market, and all 3, the lift, mounter, and balancer, have all performed flawlessly over the past 2yrs. Bought all 3 for $4600

@@Modified1​​⁠that’s great! I have a Katool 11k 2 post lift which I love! And my tire machine and balancer are arriving today! I ordered the tire machine with the bead blaster, so we will see how well that works!? And I have the same balancer as you do. I appriciate your calibration video! That makes setup for me that much easier! Thank you!

@kylepawelczyk163 That's awesome! Thank you for watching!!

Just have to change the fluid every 30k and NOT run 35's or larger lol!!

Thank you!! I'm out here trying to make it happen!!

@MarkRussellDC-APC Thanks for watching! Good to know they have good support. These were tight to install on the passenger side. Also, make sure your new sensors ohm out correctly. I've had bad ones right out of the box, and have had new ones that when the engine reaches operating temperatures, they drop impedance, giving a false check engine light.

It's not a bad project, I'm doing a follow-up video on painting these soon. We had to figure out what color to go with vs polishing.