วีดีโอ

Where is the Compas located?

At 40 seconds in, you mention the 'metal protective piece'. Does this part have an offical name? I'm in need of it after crashing my drone and it breaking.

Well that was a job and a half, but I just managed to repair a DJI FPV by replacing one of the rear arms from another crashed one. Luckily there was no need to disassemble the whole drone; it was just possible to undo the screws holding the arm and desolder the wires. Thank you for the informative video!

What about the cam? :(

My dji drone of mavic air 2 GPS board has damage that make drone to fly .pls how can get a new one I mean GPS board

So when it came to removing the gps chip one of the screws was replaced with a plastic tab instead of a screw how do I remove it without damaging the board?

where r the antennae located and how do they look like ?

I wonder if it would fly without the obstacle avoidance module, at least that would be something to reduce weight on this thing.

I crashed my Fpv drone totaly by flying into ground at 78mph.. 😵‍💫I wonder if anybody knows if the drone has the fullsize 03air unit inside? Maybe I can use it on other builds..

dude absolutely BEAUTIFUL genius idea !!!!!!!!! should design a 5 inch freestyle quad with carbon fiber (or even 3d printed) and make a slot for the a plug and play design like this, THIS is the video ive dreamed of just swapping the 03 to other drones and taking off!! A+ my friend

Very very useful video in a simple and to-the-point format! Thank you!

Hello DJI drone processor thermal paste is blue in color. Can I find this blue thermal paste online? Which thermal paste do you recommend as an alternative?

Crashed mine, wasn't paying attention to low battery and it tried to return to home through a bunch of tree branches😅 it sounded like a chainsaw crew up there, and then it did some insane bounces over and over on the soccer field.. of course no one was there to film it for your enjoyment😢

Just crashed mine. Need to disassemble mine and see what I fucked up. Thanks for this

Hi.question.brand new unflown mini 3 pro,rear left arm has slight play,click when in closed position, is this normal,?fine when opened

i wonder if the vtx and camera can be repurposed?

Awesome video thanks for saving us money! Although if you guys dont have enough time try Gorilla epoxy 2 components glue. It seems like perfectly loves the plastic material of this drone. I dunno how long the glueing would last on mine but certainly keeps the drone in one piece untill I gaining strength and the part to fix it properly.

Hi location of the campus in the Mavic mini 3

Hello,what for is that black cable on bottom cover? I ripped it ,when i removed the bottom cover. :(

Thank you so much for the video. I have crashed my drone, apparently there's no much damage but it is not starting up. When I turn it on, the camera and gimbel works and after few seconds, the fan starts but nothing else. Can you help me in diagnosing the issue? Thank you so much

I am waiting for the transplanting of the DJI Mini 3 Pro to a carbon fiber race drone chassis.. can you?

What size are the screws of the fuselage?

Please help. On 0:40, he is saying "metal protective piece." How are that part called exactly?

Thank you very thoroughly done video! Can you please disassemble a Potensic SE Atom and post as well? Thank you again!

What chipset this drone ues?

Here's a strange question: After completely disassembling your DJI Mini 3 Pro Drone, could you see any parts or areas of the plastic drone body where one might be able to remove some of the plastic material in order to lighten the overall weight of this drone enough to counteract the weight of adding a set of aftermarket propeller-guards? I ask because here in the United States the DJi Mini 3 Pro drone is considered a "Class-1" drone. It weighs less than .55 grams. IF you install a set of propeller-guards it increases the weight to more than the .55 grams. This means that the Mini 3 Pro drone then becomes a "Class-3" drone. The rules for flying a "Class-3" drone then become a bit more complicated. For the sake of argument and disregarding any warranty issues, I was just wondering if there was a way to lighten the weight of an existing Mini 3 Pro further without compromising the integrity of the drone as it was originally built.

Hello. I bought a wrecked drone online and it is binded to an other acount. Would you recommend to change the motherboard in order to fix my drone or do I have to change other parts as well? Thanks

Good video sir

The little hooks where the ND filters fit broke off in my case. Is this plastic part replaceable separately?

What's the black sticker on bottom cover ? I disassemble my bottom cover an ripped it of :( It has a metallic surface and now im fear that it was a part of the antenna system

India me aa jayega

Where is the antenna connected and how many ? I'm planning on replacing it with better longer one. Hopefully I can put an antenna going through all four arms and one under and on the top in a Y slightly sticking out. At least that's my plan it should increase range signal pick up in both vertical and horizontal directions or in any position. I also plan on adding BETTER antennas to the DJI-RC CONTROLLER possibly double mushroom antenna.

Nice video ! To remove the ESC, do I need to remove the rear arms as well ?? Thank you!

Can I take the camera and Gimbal off a drone and use it as a ptz camera for my house

sir can you tell me the VTX please

Do you know how to get the motion controller apart without breaking it? I removed the four screws but it still feels tightly sealed.

how would you guys recalibrate the gimbal after a swap?

สุดยอด

Thank u

Cool

Very useful! Hope you do an Avata teardown as well.

DJI really loves using this blue thermal paste like putty. The closest one I could find is "Kingpin Cooling KPx Thermal Grease". Does anybody know what it is exactly?

Awesome .dij avata teardown bro

Dude you are a legit life savior!!! I couldn’t find the metal bracket ANYWHERE!! Like the one that holds the flight controller and other boards. I’ve been searching for a good month now, and came across you guys because I was trying to get a picture of the bracket to see if anyone in the drone Facebook groups had one laying around and low and behold you had it in stock!! Sucks that it’s from the UK, and I’m in the US, but I’ll take long shipping times over not being able to find it at all. Anyways, thank you again! You saved me at least 200 dollars since I don’t have to send it to DJI. Also, quick question, does that metal bracket come with thermal paste like it shows in the picture, or do I need my own. If I do need my own, can I use normal computer thermal paste, as I have some laying around from my pc build, or do I need some super special DJI secret paste?

I need a much better quality micro screwdriver than what they give, what is the size screwdriver for the propeller screws please, thanks. I have a Craftsman set but none fit well.

i hate the fact that its circuits are built like a smartphone

Is there any place to drill any holes where I can create another Air Scoop to help this INFERNO out. ?

Melhor vídeo até a o momento de desmontagem sem danificar o aparelho . Parabéns.

I want some parts can i get it

Any idea on how to fix gimbal stuck issue for the mini pro 3? I can't see any videos online! Would be great to see you make one!