วีดีโอ

@@ConnorA21 yes they do. 👍

@Gaz-D-Projects thanks for the reply Gaz, if you don't mind me asking my gearstick has play in it, for instance like turning up a stereo radio volume knob, it turns left and right, is this normal?

@@ConnorA21 do you mean to say the top of the gear knob is able to spin from left to right? If this is the case then no that is not normal. You could try using some lock tight on the knob treads or alternatively buy a new gear stick knob and ensure the treads are good. 👍

@@Gaz-D-Projects yes mate it's that but the shaft is moving like that also.

@ConnorA21 are you able to select gears? I would check the bushings and replace them. ensure the pin between the "shaft" and gear selector is not worn also. 👍

@@197_toyota_levin hack is meant for a small area of lawn. it was meant to get me out of a bind at the time as I had no nylon cord.

Oooo ok

Did you survive?

@@The-Mandolorian No...I dead

@@mnpu4499 my condolences to you and your family...

@@mnpu4499 my condolences to you and your family...

@@andrzejmajchszak455 the frame itself is very strong, but in regards to rider weight I wouldn't push it past 230-260 pounds. Very comfortable frame geometry too. The original handle bars are double walled only from the centre out also. so these can break under certain loads too.

#sergecadoli6727 la roue avant est simple à retirer. où rencontrez-vous des difficultés, envoyez-moi peut-être des photos et je coudreai si je peux vous aider.

Bonsoir j'ai retrouvé enfin votre première vidéo où vous nous montrez ce magnifique vélo.J'ai depuis réussi à démonter la roue avant (avec ses griffes plantées dans la fourche🫤) Avez vous fait d'autres vidéos parce que je suis en train de le nettoyer entièrement mais mieux vaut faire des photos avant démontage! C'est du beau matériel mais très technique! merci pour vos retours. 😉

@@sergecasoli6727 c'est une bonne idée de prendre des photos avant de démonter. J'avais l'intention de revenir au vélo Kettler, mais j'ai été très occupé ces derniers temps. envoyer de l'amour depuis Dublin Irlande 🇮🇪

@DerChickenBoom cool glad to hear it. I think the my kettler came with a pump. I will have to have a rumage around, but thanks for the offer. ❤️🇮🇪

I really appreciate that. was a bit of a mixed bag in regards to the weather that day. Nice to reminisce back in the day. Super glad you enjoyed the video. Lots of love from Dublin Ireland 🇮🇪❤️

Cheers from Nova Scotia , Canada !@@Gaz-D-Projects

@@thinkpadBentnoseTheBlind 🇨🇦❤️

@brrrt6666 thank you for the heads up on this one. I will search German eBay for parts ❤️

@@Gaz-D-Projects might have to find the manufacturer of the respective parts the lamps were probably made by union, the pumps will have been made by SKS...

@brrrt6666 quite possible I may do some more research on this and see if I can source some parts. Glad you enjoyed the video all the same. Love from Dublin Ireland 🇮🇪 ❤️

@Pedalhounds was a great day Gary, really nice bikes on show a real credit to there owners. Roll on the next show ❤️. 👌

@maccer28 the plot thickens 😂, hope you enjoyed the video.

Was good, need more like it in Ireland

@@maccer28 definitely need more of this content in Ireland 🇮🇪. Shame about the sound sync on Dave's interview. Really glad you enjoyed the content ❤️.👍

@johnnywallace8123 really glad you enjoyed the review. as for eco mode to be honest we didn't use it that much we opted for Trail and Boost mode most of the time, but that said eco mode definitely has its place it really depends on the application to be fair. we didn't really run into any issues with the headset steering stops I'm sure there's a method to the madness there somewhere 🤔

Thanks for the reply. I'm waiting for another video. Enjoy the rest of your day.

@@johnnywallace8123 video incoming very soon 👍

@johnnywallace8123 thank you for the great comment I'm glad you enjoyed the video and that you found the information on the Vitus helpful. Vitus really do know how to make a great all round bike. Apologies for the bad sound I only had a small mic with me at the time. Enjoy your new bike and hit those trails hard. Love from Dublin Ireland 🇮🇪

Not true

Ok, I had this brainwave too and did it once. Here's what I noticed: - The wire needs to be well balanced or you introduce excess vibration through the motor and up the shaft, into your hands. -Its good for light duty (aka real lawn) but tougher wild grasses and weeds can strain the trimmer as there is no give in the wire. You may have to be less aggressive in heavy stuff or suffer frequent motor cutoffs. - The wire will wear down the metal eyelets where you feed line through, introducing sharp edges. For me, that meant normal nylon lines started chaffing heavily at the eyelets, breaking off at that point every few minutes of run time. If you are lucky and still have enough metal on the eyelets, the nylon will eventually smooth those edges out, but only after you burn through a spool or two of snapped off line. Its a nice experiment, but you may need to replace some parts after.

@blues master yeah the cable fray action wasn't great at all in fact, but it got me out of a hole after running out of nylon cable reel. Great idea with the clutch cable with the nipple ends 👌 let me know how they pans out. ❤️🇮🇪

​@@Gaz-D-Projects Yes I certainly will . It was the first time I'd used a strimmer and thought to myself .Why'd they use almost fishing line on them . I think what i have in mind will work perfectly . I'll detail it when i get to it .The nipples were perfect for the eyelets on the strimmer . I fed them through and cut to size . I was using the strimmer wrong against the walls I just realised that's why it wore out so quickly. I'm gonna cut another one and and attach some removable cable nipples to the fray ends .

Agreed Corissa. I don't Condone unsafe practice, however at the time this got me out of a tight spot. Love from Dublin Ireland ❤️

You obviously havent ysed a petrol strimmer.. Even nylon can cause lots of harm..

Bro don't do it. Could fly into your eye. Risk/Reward. Always choose health.

@@Gaz-D-Projectsi tend to disagree with the others..that's what the surround/shroud is for, to make sure if it detaches it doesn't go up, granted if your using it horizontally for a hedge or at any angle just make sure no one is around but that's normal practise with a strimmer anyway! ...also if any standard strimmer wire miraculously came off and slapped you in the eye it would hurt just as much..😂 but overall very unlikely of an accident if you keep it low! great video! 👍🏻

@@ivormectin.3046 there is an inherit risk and or danger when using such a device. safe practice is allways something to bare in mind. and yes I've used 2-stroke strimmers in the past.

Amazing bikes Mark and they ride so well. Super comfortable 👌

They are amazing bikes @bronco6293 so well made ❤️

@HRE IRL I'm colour blind man, I wouldn't have a clue... 😂 Only joking sure blue suits you 👌

@Jim Sheils Oh easily another 40 years Jim. The level of engineering on these Hubs is absaloutly Brilliant! 👌

@JimSheils Much Appreciated Man Glad You Enjoyed.

My pleasure Jim, hope your keeping well and stay tuned for upcoming videos. I've got an exciting video coming up in the next week or so. ❤️

@Simon J Giveaways Thanks very much every little bit of support for a growing channel is always appriciated... FYI: stay tuned for more videos as I have a few surprises in store 😁

Thanks for the Support still a bit of a learning curve, but more than happy to share my Biking knowledge to like minded individuals and fellow TH-camrs. Stay tuned for more and as all ways "Take Her Handy" ❤️

@@Gaz-D-Projects by ni jlmllppp op pppo ma y by m33341+oppteerq hu hu hu try ty ew

KCD10 Much appriciated. Glad you enjoyed ♥️

Thanks very much buddy still trying to get to grips with the whole filming process, but we'll get there in the end 😁. Stay tuned for more videos 👍

makes sense it being from the VW family ❤️

Very true Marcel. Gotta love German engineering. Hoping to get a video of servicing the Seat Leon up soon. The weather in Ireland is very inclement at the moment. Stay tuned for more videos. Thanks for watching much appriciated 👍