วีดีโอ

Hola sabrías decirme por donde se endulza es que no lo encuentro gracias

What reel is that?

bro put some tension at least😭

I just got a trickler today.. another video said you have to turn the knob counterclockwise... I don't know I'm new to this little powder trickler... I notice you were doing it clockwise... I guess it don't matter I'll try both ways

IMHO - I had always been a fan of Duckworth boats, which seem to be the "Rolls Royce/benchmark" but recently have fallen in love with Wooldridge boats, greatly designed, built tough, and more utilitarian than luxury

Thanks for fishing the Eagle Claw Featherlight Pro trolling rods!

Having the correct propeller is very important to achieve maximum speed and maximum rpm outboard tolerance, but to determine this for your boat you need to get that engine at the correct height, you should start by putting your cavitation plate flush with the transom, you will probably need a jack plate to get it to that height. The mounting of any outboard should start at dead flush to 1" above the bottom of the hull for the anti-ventilation plate. Once the water surface exits the transom, it rises at a rate of 1 inch per foot. Most engines when parallel will end up being approx 12 inches from the transom to the leading edge of the prop hub, which is why in general, 1 inch above the hull bottom is the expected norm...... so there is not an absolute rule here........ Ideally the cavitation plate should be touching the water at max speed and not submerged. Greetings. juliovideo.

Wow 🤩 Nice 👍

Enjoyed the video. Also just subscribed to your channel for future vids. Keep them coming and good luck

i have 2 lake trolls, 18 inch boom, will the telescopic booms fit and would you recommend if so, great vid, thank you

Who came here from Fishbrain

I agree 100% about the fusion hooks. Junk. I change them out before I go out. Good video

Good content and filming. Thanks for including the details at the end. The Fickr Minnows work well for me in ontario as well.

You over science this boss ! Fish are stupid ! I make all my spoons from 1/8 to 1/16 thick stainless steel sheet metal from scrap yard . 5lb sheet for $ 10 bucks . Trace the spoon , Cut , drill hole and add hook ...your done ! 😂😂😂😂

I just ordered one today,where is the power trim and tilt switch located?

good job

95 sea nymph?

Child should have a life jacket on.

Thank you for this information.

Thank you! I bought open box but it had no instructions. Appreciate the help man.

Boulton Power Boats

Nice. I'm thinking of downgrading my Mercury 9.9 to one of these. The Merc is heavy at double the weight. Thanks for sharing. 🎣🚤😊

Buddy I have the same motor and 32 mph is my max, you must have a heavy heavy boat!!! 😱 my boat is under 300 lbs.

I have one of those! I love the sound! Gotta little growl

Cool 👍😎

What’s the altitude change that you need to rejet it for?

Thanks for using Eagle Claw!

Hey there… just bought this exact motor as well.What battery would you recommend using? After changing the oil after the 10 hour break in period should I stick with the 10-30 oil and change the filter? Thanks -Brady

Thanks For Fishing Eagle Claw!

I wstched this video from the Ausdie boat guy. th-cam.com/video/GE1_5IHxCTU/w-d-xo.htmlsi=c9wcpu97ow7_rnWm He mentions casting marks and blade width thickness and how it can effect preformance. A good prop guy should help ya....good luck

Hello. What was your max rpm with 9 pitch propeller? And maybe the 9 pitch one is heavier than the 10 pitch one because of the thickness. I got a suzuki df25a and i had the same problem as you. My prop was big for my boat which is 10.25/10. I just grinded it to make it samaller. I know its not good solution as buy a new 9 pitch one. But i can say it worked . My speed and my rpm is increased. For your situation i can only say the thickness of blade can be a problem.

Awesome

Super informative. Nice video. I just moved to Breck and plan to do some jigging in Dillon. Have you ever done that?

Have a look at Lifeproof Boats in State of Washington. Three different classes professional, yachtline and pleasure craft. I have been looking and lusting for a while but need to win the lottery first. Also looking at OXE diesel outboard power.

Theres only 1 boat out of all the ones on your list. 22 Pac Pro Self Bailing Deck and No Foam !!!

Ce poluare

Does to cost a lot to maintain?

Новый меркурий 5 сил у старого переключение хода было сбоку у этого спереди

Это мотор докатка. Нужен когда накрылся основной.

I agree, the taller diameter was too much. I bent my prop and went with a solas 10.5x11. Factory was 10.25x11. They say to load the the boat with your normal load and check the rpm at wot...adjust from there. Mine was tachin at 5800rpm/26mph. Quick question for ya, does your motor have a shake to it until it hits around 1100rpm then smoothes out?

just got mine in april...cheap tach helped to keep it under the break in rpms. It is definitely a time consuming process.

Явно маловат для данного судна

Мне казалось что он тише работает, а однако нет, тоже тарахтит. Может это не Меркурий?

That's some good speed for a 25 hp. What the max speed on a clear day?

That 6 hp is a work horse.

Ещё глубже посоди мотор тик токорь

торохтелка

Suzuki replied that E5 PB 98 may cause the engine to overheat at maximum speed and they recommend E10 PB95 fuel. What valuable comments can you recommend to help me get this Suzuki right? Bede was starting to do the first 20mth Can I safely transport it in the trunk on the designated transport side? Nothing will happen ?

I bought a new SUZUKI DF15, can you advise me what fuel to use, E10 PB95 or E5 PB98?

Tohatsu!