วีดีโอ

Thank You for simplifying this for me. Ive just replaced the radiator, water pump, thermostat, fan and temp sensor and my brain is toast Thank again

Can i used that to my steel gate

Look up TEIN EDFC ACTIVE and ACTIVE PROElectronic Damping Force Controllers. These are used with Tein coilovers that replace the stock ECS feature. All the ECS does is changes the stiffness at certain speeds. I'm using the Megan Street coilovers and you can adjust the dampening (stiffness) manually. Megan Coilovers are probably the best cheapest coilover for these cars. I didn't run into any issues with the bushings either.

2001?

You need to change the hinge pin by a longer one but it still slammed the door making too much noise. FAIL.

Cheap but dangerous!

What type of bulb!!

Bro that’s not the base model it has the due cam

Cakep..👍👍 Semoga di indonesia sudah tersedia barang nya

Did it happen again? Did you have any solution for this problem??

how to fix it???? Don't buy a fiat 500??? yeeaahh LOL buy a toyota, they can last excess of 20 years still have freezing cold A/C

Love the music that goes with the video, sooth viewer’s anxiety, since most people searching videos like this are stuck in a situation already, such as me, lol! Keep up the good work! 😊

Who was yelling mommy help?

Remove the strips and it will look nice af

So… another thing I’ve noticed about this issue is that it never happens if the car is sloped down to the front (I back it into my driveway) and it always happens if it’s sloped up to the front. It leads me to think there’s something happening with oils ability to 1) uptake/ flow/ reach the piece making the rattle when the car is in a specific position, or 2) runoff. When stopped operating the oil runs off/ out of any delivery channels, or keeps the oil in those spaces depending on the positioning of the car; resulting in unlubricated parts or inactuable functions (rattle) until the oil pressure gets there. assuming oil stays in some pockets of the channels or near the rattling part when it’s parked tipped down to the front

Change the filter first while the engine is hot... aluminum expands. You won't lose much oil. Then drain the oil.

You know, you killed me to my opposite. But yard would not forget me That gave birth that you could not get through it. If you had bottom brush and don't let s*** cover in that you couldn't even get through there. Okay, you go tell me another one. Everybody wouldn't gorgeous, everybody. Wouldn't we have people that we have to work on it? They don't do that kind of work. OK, that's what I'm saying, but when I was doing at me for telling me kids to do it's doing it's for practice now. What am I going to do with you? You're getting mad? You know, I can't imagine you're supposed to always get the hell about what you're saying no to me. Cause they aint noticing. They're not listening, but they don't listen. You don't wanna talk. Well, they don't listen okay. So what good was that? They wanna holiday. I don't know, they probably did so tell me what don't holler like this yo yo here, look at the d*** look at the d*** rough out of the holes, but I'll tell you you gotta move the lawn, have to do what wait did they? I did that movie. Yeah, they moved it. You had to or you run it one moreover and tell us more. That's why I told you why that's why you do it in a circle. You're trying to find me right to get right? Oh, so you don't know. That is why you do things

Please oil the door first, that's not possible

These didn’t work on our siding door. It cost $2,700 to take out the sliding door to replace with a swinging door before this device worked. The cost of the spring: $11. The cost of the new door: $2,700. Total cost $2,711. Works great!

Thanks for the great video. My 2012 Fiat started to do the same thing and your instructions took me directly to the issue. Many Thanks for posting it.

Thank you for saving me from having to call maintenance at 2 am.

Huh😂

Great video. Very detailed. Thank you very much

Am I to understand that this is the best I can expect from Hyndai?

After telling us to go to another channel you stopped talking altogether hehe & that was the main part where you need to speak.

You’re the only video I’ve been able to find about the housing assembly. I’m gonna have to find a junkyard one

I filled the reservoir with Bars leak and I wanna get it out before get it to the shop. Can I just run a water hose in the reservoir?

Mean, cheers cuz

Sr by rattle does it mean you can feel it inside the car like in the steering or something? I wonder if this is still an issue on civic tenth gen. Mine is 2018 civic and in the morning i can also hear short high pitched screeching noise if i start the car. I'm not sure about the rattle though.

Thank you!

It may be just a fuse or relay before you do this. Its amazing how many codes get cleared with an older 500.

How do i get it?

You got a link to that one you replaced it with? What brand is it!

Thinking about getting a 1995 SL 2d 170k and for $4,500 steal or no?

The plastic clip will fail and fail, i won't buy another clip ever again. Through the broken clip and through the hole in the glass that the clip go's into, just thread a strong zip tie or three to hold the glass to the broken clip. They might last a year, they might last two ? but a lot cheaper than buying clips.

Available in TN Where City

I have a 09 sonata NF, this car will last you for awhile if you do the regular maintenance. How did you get the engine bay looking that good?

J'aime pas trop tard vidéo j'aime pas trop ton Tik Tok quoi mais quand même tu as réussi la vidéo j'aime bien j'aime un peu quoi mais vraiment bravo d'avoir fait sur la vague bravo vraiment bravo mais je suis pas très très fan je suis pas vraiment très très très fan mais au moins tu danses un peu bien fait très bien comme comment tu dors tu peux continuer à faire tes vidéos comme ça et ben je pense qu'il faudrait pas qu'on t'insulte comme ça moi perso je t'insulte pas je te dis juste des trucs comme par exemple j'aime pas trop ta vidéo mais aussi non c'est truc là c'est bien bravo je suis pas vraiment très très fan mais au moins tu as réussi bah je suis pas très très fan mais au moins bravo❤❤❤❤❤

🎉🎉🎉 nice one xx

Have 2013 also had to replace the cmt(electronic system)

Starter going bad.. i just changed mine..

Good work🎉

Is it staged for entertainment consult with a certified electrician

Sir. OEM Honda makes a paper template. That goes on the door and aligns the molding perfect

that spring needs to be half the roundness of it.. its to wide but a good idear

Your being funny naming the flags right?

What’s the name of the part?

Good job my friend 🎉🎉

This is good i❤it

Ur half helpful