วีดีโอ

We’re all wearing tees, but I’m assuming you’re talking about the one im wearing in the clips where I have a Boonie hat on? If so this is the UA Tech Tee in charcoal gray

@@BlackFlagSummitClub thanks I was refering the gray one, the one you're wearing with the hat. Thanks for the intel

Not familiar with that brand or product to be able to provide any input. 🙂

Thanks for the info. I have the All-Terrain shorts and think they are awesome. Will definitely check for these.

@@craigrobertson6082 The AT’s are a different beast all together as I am sure you are well aware. I love my raider field pant (pretty much the only pant I wear these days) but I’m not much of short wearer unless it’s when I’m getting in the water so the 72Hr definitely fits the bill for me. I only own two pairs of shorts - the 72hr being one of them and the other is my board short. I’m seriously debating picking up an Argonaut though

The floor is a bit thinner than on the Alpaka Scout but if I was a betting man, I would say it should be OK but if you’re worries about it, I would suggest maybe putting some booties on your dogs’ front paws just to minimize wear on the material.

You’d have to check their site but if you have one of the older style mount you could always just swap out the MOLLE plate or even just the hardware. I like that about the tension screw- makes it easier to swap out devices / mounts from platform to platform without having to remove the part that mounts to the MOLLE

Awesome! Thank you for providing this clarification guys!!! That is very good to know! 🙏🙂

You referring to the source inline or …?? I didn’t have the same experience with my ThruLine

I have no experience with the pro max just the 13pro and the 15pro

No, it doesn’t need any tailoring to be able to attach the hip belt.

At least with both the iPhone 13/15pro - I did not notice any degradation in the sound quality of either the microphone input or the speaker output. The ringer was also not impacted that I noticed.

I can try and throw it on over my Crye JPC and get back to you on that but if it was to guess, I would think that I wouldn’t be the most ideal shoulder strap design to be worn over PPE because of the width and shape of the shoulder strap design.

It is the Juggernaut NAVboard - I covered it in this video th-cam.com/video/Zy62RcDqMr8/w-d-xo.htmlsi=XBpfECHSKLlL5TL9

Thank you so much! Really appreciate your support 🙏

Yes. I have one. Any glass screen protector that is case compatible (99% are) will work just fine. Also you won't lift it up by putting the case on and off either.

Are y'all ever going to rerelease the beast hoodie, or am I SOL?

@@lrausch829if you loved the Beast v2, you’re gonna love what they have in the works…..will be posting a video on it soon. Wait one.

Thank you! Hope you found the information useful. 🙂

I have both ITAK which does all of those things but i mostly use All Trails for navigation

These Malice clips are really common place at almost any Mil-Surp stores or online. Super cheap as well.

If youre running a PC i would go with somthing designed for that not a hiking rig. Somthing scalable like a FC Slickster would be one of such products that come to mind.

I have no personal experinece with the Belt Clip unfortunatly.

did you ever figure it out? I am having the same problem.

Hello Taekoh8076. Yeah, i did figure it out. I ended up finding a piece of metal rod just small enough to go through the hole in the connector, and long enough to get both feet standing on the bits protruding from the side. With both feet on the rod, i pull on the webbing and other part of the connector and it will come out - with some force. Hopefully this will loosen up a bit over time but not so much that it will suffer. I have a bit of a love/hate with these connectors since discovering them. I had never seen them before and they are really secure, but they are almost too secure to be practical in the field.

Thank you so much, you are the savior 😂 I guess I just need more force to get it open.

Get somthing ridgid that will fit into the holes - i use a fork and just pry it back like a lever - dont worry you wont break it.

They are working on such a product - it may even be available ok thier site now.

What cases do you recommend. Completely genuine question. I have a S22 ultra and haven't found one case I like. Ordered at least 30 cases in the past 2 years. Had the Pelican Voyager for Samsung Active but for the Ultra the Voyager doesn't cover the edge of the screen and only comes in clear. I am in construction so clear looks good for about 10 minutes.

It's been 2 weeks since these comments, still no response?

Ive heard good things about OtterBox if protection is your main perogative. I got the Juggernuagt for Its ability to be mounted to my chest rig with the PALs mount. There Rest is just a bonus.

Youre not wrong buy keep in mine that got the Juggernuagt specifically for Its ability to be mounted to my chest rig with the PALs mount - to make use of my drone easier, being able to flip my Phone down, use it hands free for navigation while on the move - Rest is just a bonus for me. If budget is primary deciding factor and you dont mind a “one size fits most” design - there are Phone boards like the ones made by Persec Gear that fit a large variety of phones regardless of what case you are using. If Its just a case youre after then Yeah maybe paying a premium for the Juggernugt or KAgwerks doesnt make much sense.

Appologies - ive been super busy with Other endeavors and Being on course.

So happy to hear that you found some value in this review! Thank you so much for all the work you guys do for your communities. God bless!

Any update?

I use this with my Juggernught on my 15pro - a.aliexpress.com/_mMvh7ma

@didyouknow3360 the pelican lens covers do in fact fit with the juggernaut case im happy to say

For durability in all but the warmest months would go with the GC for the summer months the EC both have excellent 4-way stretch properties - the EC also dries a bit faster.

Yeah Thats a fair point. Was actually considering an antena relocation cable or one of the wearable antenas from Catalina Antenas as my next purchase…

This is just the “unboxing” video meant as a little preview….i share more of my insights and impressions in this video: th-cam.com/video/udzJc1KHyPM/w-d-xo.htmlsi=7DBNgW27_FYgflwi

lol 👍

Because I almost never run my KB as a standalone I just need it to carry the item I need access to while on the move. That said had they had the medium KB at the time I got this I would have gone with that one and I think it would have been perfect! I think if HPG added an elastic expandable main pocket it would be make this perfect. The only thing I would add as an amendment to my videos on the topic is that if you run the KB loaded to its max capacity like I do it will have a tendency to cause the harness to ride up and push on your neck which is easily mitigated by Remington the harness all together and run the KB off the shoulder straps of your pack via the HPG load lifters. Much easier for donning and doffing as well. Been running it this way ever since.

As for the phone mount - I have two videos that specifically cover the Juggernaut Armor mount and how i use it

Is it compatible with Tempered Glass Screen Protectors?

​@messdkilla4877 Obviously not. For $80 plus it should be. They should make their own and charge $90 just for the screenprotector. Idiots would buy. As long as they put a Mike Rowe quote in the advertising.

Yes sir! Good eye! 👍

@@BlackFlagSummitClub I picked up one from them in March. Nice quality. Looking at some of their other stuff as well.

TY, and yes I would have to agree

I can see what you mean but I haven’t had enough mileage to provide an opinion on that yet.

I can’t fine it either

Actually I just found it on the juggernaut website

Mystery Ranch calls it the TAK harness but Juggernaut calls it the PALs Pack platform juggernautcase.com/products/pals-pack-platform.html

Glad it was helpful!

It’s great so long as you work within its limitations - the face fabric is quite delicate - it’s not like a woobie….think of it as a light wind shirt - like the level 4 PCU top

The retailer had it listed at 1500ci 24L which is also confusing

Right on! Yeah the discrepancies are worrisome - I called them and pointed this out to them but I guess it’s still not corrected?

@@BlackFlagSummitClub I’ve emailed them 2 days ago but still not reply (weekend), I’m curious as to how they will respond. I was initially assuming I bought an older version of the pack but I was wrong

@@HenryHHHz14 yeah, when I called the EBS customer service (the number is in my video) I was getting some different answers as well. But I can confirm that it is indeed a 1500c/I pack and the F5 SB and the SB is the same pack with the exception of the MOLLE and Loop panel.

@@BlackFlagSummitClub if you’re curious, this is the response it got … “Actually, there was nothing changed to the pack. Our initial measuring of the pack was just off, and we went through a number of our EDC and Mission packs and re-measured the volumes to be a more accurate depiction.”

It does not