วีดีโอ

Hi @descendinggod9740, its not recommended to use CARPRO FogFight on the exterior glass. You can use your wiper or water to rinse off before driving.

Hi @christianliesaputra3592 , yes. CARPRO HydrO2 Foam can be applied to most solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydrO2 Foam

Hi @julesthia3725, Ech2o is used more as a waterless wash/quick detailer than a lube for claying process. You can still use it, but ClayLube is the dedicated claying lube instead, as it is more lubricating.

Hi @HosniElmolla yea, that looks like a plan! You can also add a CARPRO Reset wash before you do Iron X and ClayBar to remove all surface contaminants, then Essence and Gloss Pad for the Semi-Permanent Fillers for CQUARTZ UK3.0 to bond even better. If there's any micro scratches on the car you can use Fixer to remove them first. If not, the above steps will be great.

Hi @devnity , thanks for the support! Hope all CARPRO products bring you the effect you want 😉

Hi @BreezeMW, not necessary. But make sure to keep it in a clean area when storing to avoid any contaminants.

Hi @BreezeMW, yes you can. You can even use it daily.

Hi @gimblito8172, depends on which sealant you use. The dilution also affects it. If you follow Descales dilution, there will be minimal removal of the sealant.

Hi @SirawatBoomSayhi, the main difference besides the area range of application is that CARPRO Perl is a layer of protection while Lotion is a Conditioner (gets absorb into the leather for rejuvenation purposes)

Hi @dsokac12, the biggest difference between both is that CARPRO Inside needs to be diluted before use, while Cleanse is ready to use. Both are for interior cleaning, but Cleanse is only for leather surfaces.

Hi @anthonygiordano6265 , BugOut is safe to use on glass as well

Hi @ktrzt, micro scratches by hand? Not an issue!

Thank you for the support @Ralf_F. Let us know what content you'd like to see more!

Love the hydrophobicity!!😍

Thanks for the suggestion @TheBreakfastLover. CARPRO CQUARTZ Skin's expected durability is 2 years. With proper care it can be more

Yesser 🔥🔥🔥

Hi @Ralf_F, PolyShave and Immolube! Interesting combination, thanks for sharing with us! 😉 And also for supporting CARPRO!

@@carpromalaysia you're welcome, I've got nearly all CarPro products!🙂👍🏻

Hi @wile123456, stay tuned to our channel! We will test this out and upload it.

@anivai007 You're welcome

Hi @josiprukavina2434, for interior dilution (dashboard, leather, steering) it'll be 1:5. If you're using 1ml of product, you'll need 5x the water (5ml)

Hey @luigidicarp9521, thanks for sharing your experience with us! We are glad that the product works perfectly! Keep your car looking great all the time with CARPRO

The car should anyways be fairly clean before contact washing it. So a pre-wash with CarPro Lift is the first step to make sure alot of dirt is gone and the contact wash is much safer.

It is important that you take out most dirt before doing contact wash(pre rinse/pre wash). Even though it is a soap, it is also a kind of sealant, so your car is better off clean before applying this.

Hi @nikosaueb, yes. FogFight can be used if the car has tints

Hi @johnlm340, yes it is! CARPRO Descale is safe to use on both ceramic coated and non ceramic coated vehicles.

@@carpromalaysia Thank you. I will use it to remove the water marks on my ceramic coated car.

Hi @Bull1the1Great, thanks for the support! Hope you love the other CARPRO products as well!

No its not weekly shampoo i use it once in every 3 month or if my ceramic coating clogged during heavy rain or contamination

Hi @HanzZaza-r4i, CARPRO Descale is not suitable for weekly wash as it is an acidic shampoo. You can use CARPRO Reset for weekly wash, as it is pH Neutral.

Hi @TheBreakfastLover, we are curious, may we know where did you get the information that says CARPRO Descale is pH neutral?

@@carpromalaysia the US Carpro website says the pH of Descale is 6. So even at 1:10 dilution the pH is 7.

Hi @TheBreakfastLover, yes correct, they do say it's pH 6. And pH6 is acidic on the pH scale. With the 1:10 dilution, it doesn't take away the acidic properties and it's intended function of use it has in the solution, it just makes it a diluted acid.

@@carpromalaysiahey, that guy isn’t wrong, you are, diluting an acid does change its pH. It might not change the properties of the chemical but it definitely does change its pH. The pH claims of this soap are confusing but it is great stuff….

Hi @DKDrawings, based on the condition you've mentioned, CARPRO Fixer would fit the description.

I really like 3D One. I do like some carpro like reflect for fine polish but for a one step its tuff to beat 3D One with a light cutting or heavy polishing pad. Its ceramic abrasive

Perl for more glossy black and protection. Inner qd is quick detail, clean and protect at the same time

Hi @nikosaueb, this would depend on what you want for the interior of your car. If its to clean: CARPRO Inside If its for dressing after clean: CARPRO Perl If its for maintenance or 2 in 1 (clean and protect): CARPRO Inner QD Usually we would use Inside to clean, then Perl as dressing. And when we need a quick detail InnerQD.

Perl is a must have.

Hi @nazranmuhammad4373 Yes you can, HydrO2 Foam can be used on both coated or uncoated cars. You can try HydrO2 Foam as a standalone when you wash your car next time! It is a Wash and Sealant 2 in 1

Hey @TheBreakfastLover, yeap. The IK Pro 2 Pump foamer only uses what water it has inside when you dilute it, while the foam cannon has additional water coming from the water pipe. You can tweak the dilution in the bottle to the consistency that works best for you.

Hi @360procarwash3, yes it is Low dust! We don't have samples to send at the moment, but we will be organising workshops in the future for interested parties to join and learn more about polishing. You can follow us on Instagram or Facebook @CARPROMalaysia, and PM us!

Hi @360procarwash3, yes you can! HydrO2 Foam is a wash and coat 2 in 1 step. It'll leave your car with an impressive depth of gloss, protection for months, and a glow that you'll admire and be back for more!

Hi @louiswang648, we have tested it out, out of curiosity using FogFight on specs, and sure enough it works! 👍🏼

Hey cebasmb8250 thanks for the support! Let us know what is your favourite product and we might feature them in the next video

​@@carpromalaysiaDescale, hydro2, lift, and the apc for what I've used so far

Hi louiswang648, of course, here's the link linktr.ee/marketing.carpromy to all our platforms including our online store. You can also tap the link in our TH-cam Bio for direct link to our online stores

Hi sebastienderidder5418, the dilution ration is the same. Just that the volume is different. For the IK Foam Pro it's a total of 1000ml (100ml : 900ml), while the foam canon is 500ml (50ml : 450ml). Hope this relieves any questions you had

Thanks for the support!

Hi there, while skill levels are up to individuals, let us know what you think and what you would do differently for the wash that would prevent scratches.

@@carpromalaysiaodd that you didn’t use the Elixir as lubrication for the drying towel. Could save lots of time there AND cut down on scratches.

No what?

Hi there, there is a rinse after the initial snow foam at the 2min mark