![FLSUN](/img/default-banner.jpg)
- 126
- 2 934 011
FLSUN
Hong Kong
เข้าร่วมเมื่อ 27 พ.ค. 2016
We are FLSUN, driven by innovation in 3D printing. Since 2015, we've pushed the limits of speed and efficiency with our ultra-high-speed printers, ranging from 60mm/s to 1200mm/s. On TH-cam, we share tutorials, guides, and tips to enhance your 3D printing experience, whether you use FLSUN or are just exploring.
We design, develop, and manufacture our printers, always striving to push the limits of what's possible in the industry. Join us on our journey as we continue to innovate and advance high-speed 3D printing.
Offcial Stores:
US Store: us.store.flsun3d.com/
BR Store: br.store.flsun3d.com/
AU Store: au.store.flsun3d.com/
CA Store: ca.store.flsun3d.com/
EU Store: eu.store.flsun3d.com/
Global Store: store.flsun3d.com/
Official Amazon Store: www.amazon.com/flsun
Official Affiliate account: www.shareasale.com/join/147240
We design, develop, and manufacture our printers, always striving to push the limits of what's possible in the industry. Join us on our journey as we continue to innovate and advance high-speed 3D printing.
Offcial Stores:
US Store: us.store.flsun3d.com/
BR Store: br.store.flsun3d.com/
AU Store: au.store.flsun3d.com/
CA Store: ca.store.flsun3d.com/
EU Store: eu.store.flsun3d.com/
Global Store: store.flsun3d.com/
Official Amazon Store: www.amazon.com/flsun
Official Affiliate account: www.shareasale.com/join/147240
FLSUN T1's Max Flow Testing – from 4.5mm³/s to 90.9mm³/s
#maxflow #3dprinting #delta3dprinter #highspeedprinting #flsunt1 #flsunprinter
We did several max flow tests for the S1 before but hadn’t done one for the T1, so we brought the T1’s test video here. It is a 10-minute video without any post-production, except for some background music added to make it less boring!
We also created an online toolkit for the T1, hoping it can help clear any obstacles on your way to using the T1 and let you start your happy printing journey instantly after you receive it:
Check out the full toolkit here: wiki.flsun3d.com/en/FlsunT1
Get a T1: store.flsun3d.com/products/flsun-t1
We did several max flow tests for the S1 before but hadn’t done one for the T1, so we brought the T1’s test video here. It is a 10-minute video without any post-production, except for some background music added to make it less boring!
We also created an online toolkit for the T1, hoping it can help clear any obstacles on your way to using the T1 and let you start your happy printing journey instantly after you receive it:
Check out the full toolkit here: wiki.flsun3d.com/en/FlsunT1
Get a T1: store.flsun3d.com/products/flsun-t1
มุมมอง: 176
วีดีโอ
Meet the artist | Norm’s Fashion 3D Printing Journey with FLSUN
มุมมอง 1397 ชั่วโมงที่ผ่านมา
👊Get ready to embark on a journey through the creative world of Norm Wright, a trailblazing designer and 3D printing artist who breathes life into wild ideas, turning dreams and fantasies into tangible masterpieces. ⭐ Join us and fill out the form for the livestream. We will take you through his latest fascinating 3D-printed accessories and answer your burning questions! 🔗 Live link: bit.ly/3AD...
When an Artist Gets a Printer, the Magic Happens!
มุมมอง 22114 ชั่วโมงที่ผ่านมา
Call for all partners revolutionizing #Fashion with 3D Printing! Next week, we are thrilled to partner with Norm Wright-an acclaimed editorial and competitive hairstylist, wardrobe designer, kinetic artist, and 3D printing enthusiast from Toronto. We will push the boundaries of art and technology. 🌟🗺️Join us as we bring visionary concepts to life, turning prototypes into breathtaking final prod...
What are the new features in FLSUN slicer V1.1.5?
มุมมอง 36421 ชั่วโมงที่ผ่านมา
#flsunslicer #flsunprinter We introduced our slicer's latest version, V1.1.5, today! In this version, we've added some cool features, such as the scarf joint seam, which can make seams less visible in spherical and cylindrical models. Check out the video or click the following link to learn about all the updates in this version. What's new in V1.1.5: github.com/Flsun3d/FlsunSlicer/releases Find...
Can the S1 Really Hit 110mm³/s? Watch Now #flsuns1
มุมมอง 334วันที่ผ่านมา
Recently, we've received some feedback from our community that they couldn't reach this max flow rate of 110mm³/s in actual use. To address these concerns, we made this video to show the real performance of the S1. In the video, you'll see a complete printing process, during which we recorded a maximum flow of 109.9mm³/s, almost reaching the 110mm³/s mark. We attach great importance of your fee...
How to Import FLSUN T1 Profile into Orca Slicer? #flsuns1 #3dprinterpfofile
มุมมอง 383วันที่ผ่านมา
We didn't initially provide the Orca Slicer configuration file, but now it is available. In this video, I'll show you how to import the T1 profile into Orca Slicer step by step guide! Download the T1 profile: wiki.flsun3d.com/en/OrcaimportT1configurationfile Get T1 here: store.flsun3d.com/products/flsun-t1 We will avoid such issues in the future by preparing all necessary documentation for our ...
FLSUN's Secret Weapon! Delta for 9 Years #flsundelta
มุมมอง 647วันที่ผ่านมา
#3dprinting #tech #innovation #flsunt1 #flsuns1 #highspeedprinting Known for its exceptional speed and stability, the Delta structure is a favorite in the industry. Since 2015, we has been dedicated to Delta technology, focusing on continuous improvement on 3d printing speed and quality for the past 9 years!!! Find our latest two ultra high speed printers: FLSUN T1 (1000mm/s Max Speed) : store....
Ignite the #parisolympics2024 with the World's First Desktop Ultra-High-Speed 3D Printer
มุมมอง 129K21 วันที่ผ่านมา
Ignite the #parisolympics2024 with the World's First Desktop Ultra-High-Speed 3D Printer
🚀FLSUN#T1 Ultra-High Speed Creative Collaborative 3D Printer
มุมมอง 3Kหลายเดือนก่อน
🚀FLSUN#T1 Ultra-High Speed Creative Collaborative 3D Printer
FLSUN #T1 🚀Ultra-High Speed Creative Collaborative 3D Printer
มุมมอง 149Kหลายเดือนก่อน
FLSUN #T1 🚀Ultra-High Speed Creative Collaborative 3D Printer
How about the 1200MM/S Flsun S1 print quality? This video answers your questions
มุมมอง 935หลายเดือนก่อน
How about the 1200MM/S Flsun S1 print quality? This video answers your questions
Flsun S1: Explore PLA-HS, PLA+, and PLA! Easily configure your 3D printing for better performance!
มุมมอง 7732 หลายเดือนก่อน
Flsun S1: Explore PLA-HS, PLA , and PLA! Easily configure your 3D printing for better performance!
Los Angeles Convention Center, looking forward to seeing you at the show with us!🎉
มุมมอง 4392 หลายเดือนก่อน
Los Angeles Convention Center, looking forward to seeing you at the show with us!🎉
#3dprinter - #FlsunS1 ,Your Creative Living Magician! ✨
มุมมอง 1.9K3 หลายเดือนก่อน
#3dprinter - #FlsunS1 ,Your Creative Living Magician! ✨
1x Benchy, Testing HIPS,ASA &PET | FLSUN S1 ⚡😉
มุมมอง 4.4K7 หลายเดือนก่อน
1x Benchy, Testing HIPS,ASA &PET | FLSUN S1 ⚡😉
1x Benchy, Testing PC,PVA & PETG| FLSUN S1 ⚡😉
มุมมอง 3.4K7 หลายเดือนก่อน
1x Benchy, Testing PC,PVA & PETG| FLSUN S1 ⚡😉
1x Benchy, Testing PLA+, ABS & TPU | FLSUN S1 ⚡
มุมมอง 12K7 หลายเดือนก่อน
1x Benchy, Testing PLA , ABS & TPU | FLSUN S1 ⚡
🎅🏻FLSUN wishes a Merry Christmas to 3D enthusiasts around the world!
มุมมอง 1.3K7 หลายเดือนก่อน
🎅🏻FLSUN wishes a Merry Christmas to 3D enthusiasts around the world!
4x Benchy Printed In 2 hours 19 mins | FLSUN S1
มุมมอง 198K7 หลายเดือนก่อน
4x Benchy Printed In 2 hours 19 mins | FLSUN S1
FLSUN S1: Crazy Printing "Dog & Pet Bowl"!
มุมมอง 3.7K8 หลายเดือนก่อน
FLSUN S1: Crazy Printing "Dog & Pet Bowl"!
[S1 Print Series] ✨Ding~ What is this cool thing? A retractable sword! 🗡️
มุมมอง 4.8K8 หลายเดือนก่อน
[S1 Print Series] ✨Ding~ What is this cool thing? A retractable sword! 🗡️
So nice 😍
The speed look so low For that flow rate My Rat RiG on 53 flow rate look much much faster than your printer Need to see the setting in slicer
I would like to know the settings of the gcode you printed. That's speed is very low to achieve that high of a flow number which means that the layer height is very high.
Thompson Paul Martinez Kevin Garcia Kevin
Got my T1 yesterday and it’s awesome!
Thank you for your feedback!!!
Was the stock brass nozzle used for all these materials? Cheers.
Hello, When i always print Petg a message error appeares: The filament xhausted.Please insert the filament and continue What should i do?
The error is likely caused by a faulty or misaligned filament runout sensor. Try cleaning the sensor, checking the filament path, or disabling the sensor (filament detection on screen). Also, ensure your firmware is up to date and consider testing with a different brand PETG filament. If the issue persists after trying these steps, please reach out to us again for assistance.
@@flsun3dprinter I have been waiting for this printer since December, and now you're telling me that after just a few prints, I need to disassemble the extruder and clean the sensor?.... How do I do that?
Printed on: store.flsun3d.com/products/flsun-t1 Model STL file: www.printables.com/model/709133-romeo-bear
My T1 cant connect at all.
Did you connect it via ip address?
@@lukemclean8271 I connected it to my WiFi router in my basement but I guess the router isn’t the same up address my pc uses since my pc is hard wired in
Did you connect via ip address or our slicer?
@@flsun3dprinter I used the ipaddress listed on my printer and still nothing.
Hello, Can I set the adaptive height of the layers in Flsun slicer?
You can set variable layer height in our slicer, please follow the steps: click "Printer"in the right side, click"Setting"incon beside the printer, click"general", "advanced", "enable variable layer height~
If i try to Download the T1 profile i get a .rar file but you guys get a zip file in the video, and i need a zip file to for the orca-slicer. How can i solve this?
What we downloaded is also a rar file in the video😂, but made a zip version for you, please check this google drive link and try it, if you still have problems, please come back again: drive.google.com/file/d/1FDXhBQv6Wcwemx_4OqX8MGwDwhpQlfsW/view?usp=sharing
Impressive!
No gold barefoot, No man is perfect !S1 still has a lot of details to be improved, and this is the case with every product. Your evaluation of the product depends on your needs and mentality. If you choose innovation, you need to embrace innovation; if you choose mediocrity, you need to accept mediocrity. At least so far, I am very satisfied with S1 .
No need to prove too much, I am using S1, its flow rate is about 3 times that of other high-speed 3d printers on the market, people who are perfect always expect too much !
Thanks for sharing
WOAH FLSUN REACHING 110MMIMILLISENCOGS PER CUBE?!?!?!??!?! SO REAL BESTIE I wish there could be a modern DIY delta kit so we dont have to rely on your half baked products. Also when are you gonna fix the ADC out of range thing you guys did to the S1?
Yeah that's not an accurate test. Acceleration and square corner velocity are way too low to be able to actually maintain 110mm^3/s for any kind of meaningful time. Same issue as the original "flow rate test" video published a few months back
Very inconsistent readings. I don't trust it. The flow changes even on a single wall which makes no sense at all.
Desculpem, eu tenho uma FLsun SR. Mudei do Cura para o Orca. É necessário fazer essa importação? Não basta selecionar a impressora? Obrigado
Pas besoin de dire pardon ! Non, il existe désormais une option permettant d'ajouter FLSUN SR, vous pouvez donc directement le choisir et l'ajouter à Orca Slicer, et vous n'avez pas besoin d'ajouter de profil d'imprimante comme T1
Is this new version of flsun It's better than flsun v400
Yes, it is one of latest printers😀
Flaun printer is sooo expesive
Nah, the older models are about $300...
Very good introduction Gloria. The T1 is crazy fast and has great print quality at these speeds. I have been using mine for 3 weeks without any issues using the standard T1 profile in the FLsun slicer...
I love my T1 as well so far. Only thing I’ve noticed with mine is that when you use ABS slicer presets it puts the bed to 110C. My bed times out before if hit that temp. I mitigated by setting to 100 and no issues printing, but was just curious if similar happened to you
@@Vaka902 Hello Vaka: I have not tried ABS. I have tried PLA, PETG, and TPU... These are great printers. Especially for the money !!!
@@dennisgignac5103 ok, I would say if you do try ABS eventually then just be mindful of it. But I agree it’s definitely a great device for its price. I have a Bambu X1C at work and I can get similar quality prints at a faster print time for a third of the cost.
This host is very beautiful and the machine is great. 👍
release a 200 dollar printer and put creality out of business fam
I would love to try one in my prototype electric motorcycle project.
Welcome to try! We love to see how our printer can help with your motorcycle project😀
I live in Saudi Arabia and the only way I can get flsun T1 printer is through Amazon Global.. When will flsun T1 printer be available on Amazon Global again?
Thanks for support, you can purchase directly from our official online global store through this link: store.flsun3d.com/products/flsun-t1, we can send it to your country - Saudi Arabia!!!
@@flsun3dprinter Yes, but it will be shipped via Saudi Post. I am afraid that there will be some complications if it is delivered via Saudi Post because it is an electrical device. So it will not be available on Amazon soon?
@@hkliiijc We wont use post. T1 is so big and heavy, it doesn't fit the post's shipping standard😅. We will use express delivery to send it to you, so don't worry
@@hkliiijc Yes, we haven't opened our Saudi Amazon station now, so it will not be available now, but it's the same you buy from our online global store😀😘
Great video
It is nominal length not official length
👌
👍
My T1 arrived yesterday, I haven’t had time to open it yet
Waitting for your T1 review. If you have any problems with it, please do contact us service@flsun3d.com
What software does the t1 run?
The optimized version based on klipper
👍
CAN I have the model please
It is already put in the description: www.thingiverse.com/thing:4733546/files
CAN I have the file please
It is already put in the description: www.thingiverse.com/thing:4733546/files
Super machine
Awesome in want it ❤
I've seen a video of FLSUN T1 printing at a trade show, it's really super fast and impressive!
Do you know what trade show it is? TCT?
We. Love. It !
Super cool video, I own 2 V400s, the print speed is very fast, congratulations on their product breaking through again, very great brand
Your words make our day!!!!
So far all the reviews are very bad. False advertisement on the 1000mm speed. do you research first.
We accept all the postivie or negative reviews, but we want to explain the 1000mm/s max speed is the travel speed that we achieved in our laboratory. We will release our speed test video soon! Thanks for all the valuable suggestions!!!!
What does a 3d printer racing a space ship have in common? Their is no way that model was printed without supports.
what should print? Benchy? Dragon? Dude don't be so serious, I guess they just want to show how fast they can print.
The fastest printer!! Finally!! FLSUN speed !!!!
🙏🙏🙏🙏
Perfil for abs please?
Great printer but every review notes that the fan Is very very noisy so Is almost impossible to think to live in the same room of a working printer 😢
Thanks for your sincere comment. Noise is difficult to eliminate when the printer operates at extremely fast speeds, such as 1000mm/s. To help reduce the noise, we've included a noise silencer STL file that you can print and use to decrease the noise level to some extent. Thank you again for sharing your honest thoughts about our machine!!!!
Fix your software guys, no one should buy from FLSUN till it happens!
Thanks for your valuable suggestion. We have fixed some previous bugs and you will have a better experience in our latest firmware - V1.0.5.4. Welcome to use it and give us more feedback🙏🙏
Fatemi capire ma fate pubblicità alla dji ,gopro e oculus quest ????😅😅😂
Of course noooo! It is our fault to make you have this feeling😢
send one to me, we'll put a 1.2mm nozzle on it
Why 1.2mm nozzle? 🤣
Fate sentire anche il rumore che fa
We put a noise silencer stl file with the machine so that you can print it out to decrease the noise level to some extent.