วีดีโอ

@@jamesbarnes9401 it's about 230 lbs

@@SoLoCruizer yeah somewhere around there. I just eyeballed it when I had the bike. I got it running great, but I did end up selling it.

@@DwayneWilson612 6' 1"

@@kentaroo.7759 I still have this saw, and it still works as it should. With that being said, I agree with you. There are better options than this one. Thanks for watching

It's not too bad the hardest part for me was the linkage on the rear under the shock, helps if you have a motorcycle jack

That’s for replying I gave you a sub appreciate the videos and replays gunna get mine up next week

And nice I do have a motorcycle jack

@@Beamen075 that's awesome man, I loved the bike while I had it, I ended up selling it but not because it was bad, I just didn't have the time with two little ones and I didn't really have a property to utilize it as well as I could have. But it rips for the price no doubt.

I have been chasing this issue on mine. Please let me know if you find a fix

@@scottsundberg226 no mechanical fix, what I do now is just roll the throttle on instead of blasting 100% throttle from idle. Other than that, I have no other issues, my stock chain stretched out enough to need adjustment in 3 hours though.

@flat_stickproductions209 I have been messing with the jets, I have a nibbi 28mm and a 30mm carb. No matter the jet size it's still doing it. I guess I've been spoiled with my yamaha and Hondas. I just can't stand it. I've reached out to my dealer about it. As of now I am still at square 1. Will let you know if I figure something out.

@@scottsundberg226 I have the Nibbi coil but have not installed it yet.

Well I know the motor is based off a crf230f and that the Rfz thunder 250 isn’t a true 250 maybe the carb size that came from factory is to big I am going to get me a oem equivalent carb off a 2015 crf230f and see if it runs better

I have a Nibbi on my RFZ125 and its bonkers. WOT doesnt hold back. Starts every time usually first kick. Idles like a scritched kitten. Its a fine tune thing...

It's the same thing, I think the rfn thunders are branded for sales in Europe and the rfz is for the US. I heard a guy from the US ordered a rfn and received the rfz branding. I'm almost positive they're the same bike but don't quote me on that

It's not going to have the power of 250f. Not even close, but there's also about a 5-6k difference in price. This bike rips for what it is, but your talking 17-20hp compared to like 34+hp on a 250f. Hope this helps!

@anthonyyoung4978 I'm interested in the bike and I'm just wondering if it's gon a do what I want... I'm not racing but I like to ride hard.. hit some jumps ride some wheelies ... we do a lot of riding around Here where I live and my sons is tired of having me watch him ride since I sold my last bike and I'm just trying to save money if I can with a bike that'll still do what I want it to

@@vincentwelshman8435 it's definitely a capable bike, you could hit some jumps and definitely pull the front end up on it. Just takes some tuning and getting it dialed in.

Mobil 1 racing 4T 10w-40 and that will be interesting I never tried that carb, I just went with a barrel style pe 28 carb you might need an adapter for the pwk but it might work fine.

Aight thanks alot bro ill be ready for this thing@@anthonyyoung4978

Just get a better battery, pull the choke lever and crank it mine always started doing that. But I also did the valves and carb tuning. That helped a lot and I will put the link for the battery in the description

@@anthonyyoung4978 ok thanks😊

I sold the bike a while ago, but you're about 400 ft below me in sea level, so I would say probably a 120 main and a 40 pilot, but you'll probably have to tune from there. Every bike is a little different. I would definitely check those valves too mine were super tight when I got the bike. Just ran it through a couple heat cycles to break it in a bit then adjusted them.

That doesn't make sense. They always take stuff back within 90 days. Is it because you don't have your receipt? They have pulled that on me before.

@@dangrimes5078 They entered my phone number wrong, and unlike every other modern business, they cannot or will not look up an order based on the credit card number... Just unprofessional.

I sold the bike actually. I moved and had another baby so I just didn't have the time to load it in the truck and take it to the woods. I have another couple videos about the carb and valves and stuff. It's a really cool bike I wish I would have kept it honestly. I might get another one in the future. Nibbi carb and jet kit, and I put an after market air filter in it. Lock tight all the bolts once you get it running good. All the typical Chinese bike mods ect. It's definitely fun especially for the price! And yes I think it would fit you just fine. You can just set the sag a little lower if it's too tall but it's adjustable

@anthonyyoung4978 damn that sucks you had to sell it. I know how it is. Got a 11 month old right now. Getting him a power wheel with remote control for his birthday haha. Gotta start em young. I'm going to get the nibbi 28mm carb with the gaskets and filter the all in one kit. The black one. And yeah I'm ordering loctite and all that haha 😄 I hope the nibbi air filter fits. How was the battery for you? Thinking about getting a lithium one but don't know the size

@anthonyyoung4978 after watching your other videos I'm ordering the same air filter you used. Thanks so much for these videos about this bike. Your basically the only one that has them.

@@502austin8 yeah I did end up putting a lithium battery in it was a must the batteries that they come with are pretty useless. And yeah I just did the nibbi 28, and I did a pro filter. I think the air filter was for a crf250. I thought I linked them in the description but I'm not sure. And that's awesome man congrats on your son. I agree gotta start them young. I put a 20v drill battery in my 4 year olds electric quad a while back and it ripped 🤣 but yeah man no worries. I wanted to make more videos about it I loved wrenching on that thing and getting it tuned. They're definitely bikes you have to work on but I think for less than 2 grand for a new bike, it's a deal

​@anthonyyoung4978 was the 28mm nibbi a direct replacement and did you notice a difference from stock carb? I've got the nibbi and the filter you used, and the lithium battery you used in my cart just want to make sure it's direct replacement on the carb. Some other guy said he would have to cutt some stuff and it's a pain in the ass.

Did u ever do it?

@@mrnoobman7061 yea I'm changing the oil right now lol

haha is it good?@@infamoussgarage

Im getting mine this june@@infamoussgarage

Picking mine up now from a local store in crate.

Hey man I'm ordering this bike within a few days and planning on getting the nibbi 28mm carb. The black one with thr black filter. Do you think it will fit? Or is the stock carb fine if I just drain it like showed.

Honestly I would not try to put a nibbi on it, it can be done but it is a shithole mess nightmare of modifications. The stock carb runs fine for what it is, I would just rebuild it when it eventually craps out. I regret trying to install my nibbi on there, hell I would rather buy a new klx 230 vs do this shit again lol@@502austin8

​@jg1093 damn it's that bad huh. Click on this guy's channel and watch that 18 minutes video he has on this. He's useing the nibbi with a stonge air filter for a crf 250 in the stock airbox. Isn't the carb just a direct replacement? I've ordered the bike and the nibbi carb.

I have the older apollo 250 so the frame might be different. The nibbi is NOT a direct fit for the older model, you have to cut the stock intake manifold and buy a ram truck radiator hose to make it work unless you cut/grind the frame all to hell. Lol @@502austin8

@jg1093 the one I ordered was the RFZ thunder, same one as in this video. That sucks you ran into that issue man, sounds like a fkin bitch lol

Yeah I ended up selling the bike lol

Adjust the valves

geez why? Theyre great looking. unless you mean bc yours broke

How much speed would the Mikuni add

@@thehoodticket maybe 5mph but itll run much better stronger throttle response

@@dirtycommtroop Thanks for responding I appriciate it

This is one is a dirt bike

Its a good solid saw for sure. It should do about anything you need. Ive used all the brands remodeling houses for a living for a few years and they all do the same thing really. I just bought one the other day for my garage. Its a good saw

you have it yet?

How's the bike now? Still holding up?

i basically rebuilt it with alll top parts. i figured ive got the frame i might as well just replace all the chinese parts with better parts..lol@@mototoad1242

​@@dr_gonzocmg5589so it is all fallen apart and you're fixing it?