วีดีโอ

Hi ANDREW Tks for comment. Selling casting kits is a thing i do not think about due to the price of brass at the scrapyard. I've boring job to do before starting machining parts. Bfn Olivier

Hi KEV Thanks for comment. Appreciate that. Machining should start after some boring things to do...🤨🤨 Have a good evening. Bfn Olivier.

Hi ANDREW Thank you. There are a few small defects but with a good sanding I think it will be ok. Cheers Olivier.

Hi ANDREW Yes main parts are done. Still a video to upload showing all castings. Have a look at the flywheel video 😉. Bfn Olivier

Hi kev Thanks for comment. Most of main parts are done. i did some off camera (steam chest and steam cover). i still have a video to upload showing all the castings. I thank you very much for your support but i'm thinking about stopping making videos due to the poor number of subscribers and views i have. it takes a lot of time to film and edit videos and result is not there. . i'll probably make a video showing the machine assembled and running. Anyway i've not decided yet. Thanks again for your support and have a nice sunday. All the best Olivier

@@OL6162. I hope you don't stop, it's a great part of the hobby, i enjoy what you do, i know it takes much time that many don't appreciate. But i only do it because it spurs me on to get jobs finished, as i have low motivation and mental health issues, since the death of my very young daughter. hope to keep seeing you regards and you have a nice Sunday too, my Sunday will be very Stessfull watching England in the euro final⚽⚽⚽⚽😄😄😄😄👍👍👍👍👍👍 Kev

KEV I'm so sorry to read about your daughter. Fingers crossed for the euro final. England have a chance to win BFN OLIVIER

Bonsoir Franco metalo Oui du talc industriel mais la même chose que pour les bébés... La cocaïne ça revient trop cher....🤣🤣 Bonne soirée et bon dimanche.

@@OL6162. oui mais ça pas le même effet c'est sur @+++

Hi KEV Thanks for comment. Yes the result is good. I'll now cast all the small parts (steam chest cover, bearings.....) off caméra as it is always the same process. Have a nice week-end. Bfn Olivier

Hi ANDREW I would not say i'm an expert but so far i'm happy with the results. There are some very little Imperfections that will disappear after machining. Have a good day. Cheers Olivier.

Hi KEV Tks for comment. Yes i'm happy with the result. Have a good evening. Olivier.

Bonsoir Franco metalo Merci pour le commentaire. Bonne soirée.

I forgive you. Sorry if you heard that adult language....😉😜 I don't know why it happened. Maybe metal was still too hot. Bfn Olivier

Bjr Merci Idem....

Hi KEV TKS... Have a glance at P4.. Bfn Olivier.

Bonjour Merci pour le commentaire. Heureux que vous appréciez N'hésitez pas à vous abonner.... Bonne journée.

Hi ANDREW Tks for comments 😉 Yes not that bad. Next one will be the machine frames. Also... Have a glance on P4. Have a good day. Cheers Olivier

Bonsoir Franco Metalo Oui c'est intéressant.... le plus chiant c'est de devoir recommencer le moule quand il y a un problème comme dans la vidéo. J ai encore deux pièces importantes à couler pour lesquelles faut bien penser où faire les entrées et les events, et ensuite ce sont des petites pièces. Bonne soirée.

Hi ANDREW Thanks for comments. I've cast other parts today i'll upload video later on this week-end. 🤞 Have a good evening. Cheers Olivier.

Bonjour Franco Metalo Merci pour le commentaire. Bonne journée. 😉

Hi KEV Thanks for comments... It takes a long time to prepare the mould but the result is good.... A bit of a shame about the cylinder pedestal next time I'll put more brass into the crucible. Bfn Olivier.

Yes i'm very happy with the result. Tks

Bonjour Francometalo Merci... Bon W.E

Hi ANDREW Thanks for comment. Yes result is not bad at all and i'm happy with. The next part will be the cylinder. The other complicated parts to cast will be the flywheel and the machine frames. I keep fingers crossed...🤞🤞 Have a good day. Bfn Olivier.

Hi KEV Thanks for watching the video and for your comment. Result is not bad at all. Have a good evening. Cheers Olivier.

Hi KEV Thanks for comment. Cherrs Olivier

Merci à toi aussi

Merci Francometalo.. Bon dimanche.

Hi KEV It's not that easy..... More complicated than i thought. Have a nice sunday. OLIVIER

I did not try over 12 mm

Oui c'est volontaire....😉. Pour le peu de temps que je vais débiter le CO2 pour durcir le noyau en sable je me suis dit que la perte par le filetage ne serait pas trop importante.

ça se rempli pas en 5 secondes c'est beaucoup plus long, car c'est du gaz liquide que tu vas injecter et si tu ouvre trop ta vanne ça bloque la valve de ta bouteille de 60 litres. le mieux il faudrait que ton adaptateur soit directement fixé sur le système de vanne de remplissage pour éviter les perte de gaz au maximum .le mien à la base c'était pour remplir les bouteilles de paintball, et l'adaptateur acheté sur ebay car en vente non autorisé chez nous.@@OL6162.

c'est pas en 5 seconde le remplissage mais plusieurs minutes sinon tu bloque la vanne de la bouteille que tu veux remplir @@OL6162.

Dans un premier temps c'est pour me servir du cylindre neuf sodastream que j'ai et qui dort dans un coin. Quand il sera vide je ferai un "échange standard " avec une boîte qui les recharge. Vu le rythme auquel je vais m'en servir j'en aurai pour un bout de temps...

j'en consomme 4 à 5 par ans et la recharge de 60 litres coute 13 euros.@@OL6162.

Hi KEV Thanks for comments. I did the thread in reverse as i thought it was easier to do it that way. I did not want to hit the bottom of the bore doing it the normal way. Have a nice week-end Bfn Olivier

Hi ANDREW Thanks for watching and comment. The scrapyard near where i live has changed ownership and they are no longer authorized to sell brass scraps to individuals..... what i do not understand. I know an other scrapyard but at 35 kms from me. I'll have a glance and see what they have. When will you upload your next video on your engine Have a nice w.e Bfn Olivier

Hi Olivier. That is bad that they don't sell scrap brass to individuals. Unfortunately other properties in life have given way to my engineering antics. Hopefully I will be able to get another video out soon. Happy hols! Andrew

i am thinking about playing guitar at the exit of churches and ask for old brass taps and ornements instead of coins.....😂😂

​@@OL6162.😂😂😂😂

Bonjour Franco Au départ je voulais en acheter un sur amazon. Quand j'ai vu les prix je me suis dit que je pouvais tenter le coup de le faire moi-même. Bon week-end.

Hi ANDREW Thanks. It would have been a shame to buy a brand new station not trying to repair the anemometer. I keep the secret secret.... my neighbours do know know about my machines....🤣🤣 You’re right it's satisfying fixing the problems and also the pleasure of using the lathe and the milling machine. Have a nice week-end. OLIVIER.

Bonjour Franco Merci pour le commentaire. Oui j'espère que la réparation durera dans le temps.....🤞 J'ai acheté le PAC sur LBC à un très bon prix. C'est un 200 mm. Pas une contrefaçon comme il y en a souvent en vente. Bon w.e

oui j'ai vu que c'était un vrai @+++@@OL6162.

Franco Une vidéo qui pourrait t'intéresser..... th-cam.com/video/7fggg1Wfejc/w-d-xo.htmlsi=1bQADYFFUJ8H-kB9 A+

Hi KEV Tks for comments.... For your weather station better late than never......😉 All the best

Good evening This is a tool I made myself from a piece of tool steel. Rgds

Hi KEV Thanks for feedback. Have a good evening All the best Olivier

roughly 35 mnts per side. I think it will not be the easiest part to cast ....🤞 Cheers.

Hi Andrew Yes plenty of chips for that part. i think i'll start casting in december. the price of a kilogram of old brass taps in the scrapyards is too high at the moment . So i'll wait a bit. thanks for the comment and have a look at part 9. all the best Olivier

Bonjour Oui le résultat final n'est pas mal. Merci Bonne journée..

Hi KEV The result is not bad at all... But i think it will not be the easiest part to cast...🤞🤞 All the best. OL6162

Merci à toi aussi

Hi KEV tks for comment. Casting should be in december. I still have to buy things before the first test (sand and so on...) All the best. OL6162.

Hi ANDREW Thanks for feedback. One of my favorite part will be in the next video. 😉 Cheers OL6162

Hi Kev Tks. Yes an other thing i love.... Bfn OL6162

????? Je ne comprends le commentaire..