วีดีโอ

I checked out your channel and saw your videos. They're great, but your video SEO isn’t set up properly, which will affect your channel’s growth. I can help you improve this if you’re interested. I am waiting for your reply.. Thanks regards “Nazmul Hossain”

"if you have this" have what? I can't even see it.

Way to tell us all what T-stat it is...

As an electronics technician... I prefer to just open the device and put an ice pic through the microphone and twist it around a little bit.

Thank you so much for the good knowledge content

I messaged you on Instagram and Chack it.

I have been thinking about changing my thermostat so I have leaned something. Thank you! I like the simplicity of the basic Honeywell and I am not interested in a lot of bells and whistles. However, if a thermostat can make scheduled temperature adjustments sans me doing it, that would work for me.

You live are prived ? No cool

carrier explained to me once if you check from any of the COM wires back to neutral or common with a call for blower, you will get a voltage drop that corresponds with a particular speed. if you have a voltage drop you can compare it to what it should be,

I hope you press into the trade. If not I’ll be back😊

Im a hvac tech. Love your videos. One of my favorite channels. I have some questions about honeywell zoning boards. About the contacts on them sticking. The boards are installed in an attick. Does honeywell advise against installing zone boards in the attick due to heat and humidity. Is this a common problem. And what is the next step, is it just replacement of the board. I work over a 100 unit townhome property. I have about 8 homes that the contacts stick 2 to 3 times a month. And ill pay for your expertise. Thanks again.

Keep fixing your old R-22 units. The new ones coming out with has butane in the Freon which now people are finding out that their a/c units are exploding from these leaks.

Does the fact that it's old, and likely higher quality due to it's age, compared to the absolute garbage that's for sale these days, effect your opinion at all, on replacing rather than repairing?

You have to wrap the inside too.

How do you wrap it

Great Video Joe H Navy Seabee

Yeah man great content my dude keep up the good work 🫡 now explain the reverse polarity on a furnace blower ? If you get this error code 😁 what do u do to fix it 😅

Excellent video and information!!

my company offers a 10 year labor warranty on almost all of our equipment. Almost always it benefits the customer to replace the system on any repair 1k or more if the system is past that 10 year mark.

They’re pretty quick also

I appreciate the video really helped and worked!

Are the same symptom s for txv my friend?

How does it remove humidity?

I like this way with the takeoff instead of splicing with a piece of pipe. Something you might want to try or experiment with as well is using Nashua 365 tape to join your ducts, it blends in almost invisibly and isn’t a rigid paper like tape like FSK tape so it can be easier to work with on flex.

I’m in NC and never seen the guys install that adapter. And the job still passes code.

excellent

Most of those buildings on main have been off and on vacant as far as I remember from the late 80s

I disagree! Explain what the reason is? Why is it dangerous? It's not dangerous if done correctly. Go home Mr. Proper!

Grass lawns are the single most environmentally unsustainable thing that comes with a house, grass used for lawns produce 0 benefit for wildlife it absolutely kills speicies diversity... Less birds and animals wanna live close to it its fkn shit

What’s an appropriate replacement unit for one of these in this situation that’s 50 gallon 48,000 btu. Anything with a “side loop”?

oh man crazy to see 2 years ago, that church looks beautiful now!

What is M2 for on the zone control board?

Close = 5 letters 😂. Therefore, MClose = 6 letters. Bingo. Great explanation ❤❤❤❤

But my unit is brand new and it smells like that

Thanks for video. I couldn't figure it out. My house watcher switched to on while I was away. I have been so miserable last few nights with humidity. Great video. Short and right to the point.

If you ever have the opportunity to show us how to install multiple returns please do. Thanks for the info.

Only issue I have with that is it's more static with the lip of the metal inside the vinyl. I'd prefer to push interduct into interduct at least 3 rings tape with flex tape then tape the outer duct together. Always pull the inner duct on the other end to get a smooth wall

Thank you so much !

Just saved me my Mf meter stopped working. 🫡

Keep it super vague definitely charged $1000 for that

Okay, but if I don't already have that, it's not really a tip, right? I cant just install it in an hour... it's something you have to already have.. How is this a practical tip?

Sweet

Thanks, will check my zone board as all air is being sent to one zone regardless of which thermostat is turned on and off.Is there a way to manually open a damper on the damper control box?

Trane AC, my zones 1 and 2 stop working. Only zone 3 works. Does this mean a new MB is required? Interesting that I set the thermostat on Zone 2 (main part of house) and air flows through bedroom with Zone 2. Thermometer in zone 3 still controls the AC and blower for temp but all air goes to Zone 2 (???). Any suggestions?

Thank you for the tip was wondering why my new house was so humid I’ll be trying this

wonderful solution

Figured it out - I pushed the fan in too far and had to center it.🤦‍♂️ Once I did that it was easy street. 😎Thanks!

Can you run both at the same time

I have everything done except for getting the motor back in balanced. Any tips on how to level the new motor while installing so the fan will spin?

thank you !