![Elijah Martin](/img/default-banner.jpg)
- 3
- 191 788
Elijah Martin
United States
เข้าร่วมเมื่อ 11 เม.ย. 2018
Just a kid with dreams.
How To Fix Sputtering/Hesitation/Misfire under Acceleration on a 2005-10 Ford Mustang
Out of the usual for videos i usually post. However thought i'd throw this one on the net.
มุมมอง: 122 456
วีดีโอ
How to actually fix "Teredo is unable to qualify" (2020)
มุมมอง 65K4 ปีที่แล้ว
This is the one and only way to actually fix this bs.
I had an exact step by step process of this issue and I threw countless parts at it. It ultimately ended up being my fuel pump. Hope this helps
I’m having this problem changed the plugs and it was a big difference for me I’m thinking to do the coil packs and fuel filter
FUEL PRESSURE REGULATOR
I found that my xbox live services disabled
So the fuel was bad? Im having this problem right now but it started to happen just after a refuel. So maybe low quality fuel is the main reason for this problem
So i have an 08 gt and every time i drive it, it limits to 3k rmp for every single gear for example from first to second it only goes up to 3k rpm before engine gets loud and i shift and so on for all gears and idk what is really wrong with it
Nice job brother👍🏼🙏🏼❤
So you fired your parts cannon at it? That's a good way to burn some unnecessary cash.
I have the same year make and model I have the same problem also my oil pressure switch is new and the odm still has it on L
So! O2 sensor is actually a chip in the computer… I just had a guy in Florida repair mine and the chip for the transmission
Same thing happened to me. I have a 2008 v6. Replaced my fuel pump three times last year. Bought better gas, fuel treatment, new alternator nothing fixed it. Harsh start check engine light and idling was weird. It ended up being my fuel rail injector sensor. Was like $50 on rock auto
This was a long, stressful video goofy
I have same issue on 2011 Ford Taurus SEL
Holy shit. Are you trying to tell us maintenance is required.
Mines doing this driving me nuts !
FUEL RAIL SENSOR
Thanks bro i just bought a 06 mustang GT AFTER 150 miles started to misfire ... the change the coils the fix for couple days And doit again....i think i need change the sparkpkugs too
What a dump
Dicen que las palomas son muy sucias pero son muy bonitas
Finally! A better class of citizenry have arrived.
I’ve stolen from that target before
W
My 05 mustang has this problem, my mechanic change spark plugsand wireset, ignition coil, fuel filter, air filter, and still have the problem, he says he's going to remove the intek 😥
Gas regulator help me alot. My car use to shut off at stops. I changed alot of things . Until the gas regulator fix the issue
did it ever happen again,it wasnt your cats
It was the fuel filter bro. The mustang I’m driving was doing the same thing but worse.
The red wire on the left side of the car near the battery, what is that. My 06 Mustang has that but I have no idea what it is
Sorry i just saw this! Lol. It is a power cable for my sub in the trunk.
Mine only starts when pressing the gas pedal and it dies if I let go . Idk what to do . Has new spark plugs cables fuel injector filters and even the pump . I don't see any vacuum leaks . Even the egr valve it's new .
That would be a fuel pump fuse, and or purge valve,
Well that was a waste of time and just throw parts at it got it
Thank u
My 05' mustang was sputtering and misfiring for a couple weeks. Turns out it was my fuel pressure sensor...... however I also replaced my cold air intake at the same time. Unfortunately I didn't screw the clamp tight enough and the same sputtering and misfiring continued. Realized what I did(didn't do) being in a hurry. Anyhow...... tightened the intake securely and everything is perfect now!
I'm having this issue right now it ran for an hour idle but after a couple starts it ended up sputtering out
It sadly doesn't work for me. Does anyone have a solution?
I sadly didn't find disabled components if anyone can help me with that please do.
bro theres no "disabled components" on my tcip6
After 2 years is there a part I can ask about with a 10’ mustang
doesnt work anyone got an updated fix?
my disablecomponents vale was 0 by default, its not working, what should i do?
IF YOU HAVE POWER ISSUE Just something to add as all the 4.6 have limitations within the throttle, below 3000k you will not have full throttle And over 3000k you will have about 75% of the throttle maybe little more So if you did all of that and didn't feel power increase Get your car tuned you will really regret all the time you have been under ford limits.
People who say these 4.6L 3V’s are slow have not driven one with some bolt ons and a good tune. It’s a whole different car from stock then. If you return to stock from a tune the car will feel noticeably slower. I know because I tried it once before.
Man everything you've done is 100% same I've done. Lol. Still trying
Did you fix it??
Weird having the same exact problem on the new edge 04 v6 exactly how you explained
Did u figure it out
It didnt 😢
I have had a misfire under acceleration off and on since I bought the car. I decided to look at the plugs and they were the wrong plugs. I put a set of the right ones in and it runs like a new one.
actually it was 0
I can't find the disabled components folder
My dads 4.6l v8 in his f-150 did that but his oil pump went out and the motor blow up 😊
No one mentioned the EGR valve which causes issues
I’m dealing with that problem right now and I don’t know what it is so I guess I’m gonna try these few things and see what happens
87 or 93 when you filled ?
Throttle Position Sensor.
So you fill the tank, but what was the final fix result of this? When you have driven the tank level lower???Did you done other fix?
I don't have that disable thing 😭😭
I see I'm not the only getting my ass kicked with the same issue. I changed the fuel pump which was in the tank. CRC the throttle body. Changed the barometric sensor twice. Changed a coil and spark plug which was barely misfiring. All with no check engine light on. 4 diagnostics check , 3 saying it's the transmission which I'm not accepting. Changed the filter and fluid. All this with no change. Also cleaned the maf sensor.
Ever get it figured out?