วีดีโอ

@@WillMaigur i think it was XT60 orginal, but im using adapter

My new battery is with deans, bought that becuase i mostly use deans on other rc stuff

I have both, samsung m2 as system disk. And this PNY is for video content. Both works good for me so far

Congrats! Im still enjoying it, so much fun for the money 🙏

@@theadmirer_ Spasibo !

Yes perfectly fine 🙏

Hello! Yes i agree, it would handle alot better with center of mass. I have seen someone do it. Glue a battery holder infront of motor. Im thinking about it, can also hold bigger battery and test 4S 😃

I tried this on my F1 hull and it canceled the self righting feature 😆

You need to make a video of that!!

Haha good question, isn't that for fishing ? in Theory i can easily mod the boat if the goal is to make longer runtime. There is plenty of room to put a bigger or an extra battery in the front of this boat.

Hello! I really love it, think i will keep it for long time. Best most fun rear wheel drive sporty car. Had it for 8 years as daily, using KM here 18000 now. Nothing weird, it goes very hard sometimes. Sparkplugs, ignition coils, brakes, water pump. Over the years its almost nothing, window mechanism broke down on driver side and had to change solenoids.

That sounds like a big diff, my GPU is stock, only CPU is OC to 3.9. if you dont have the XT version of RX6800 there could be some diff. I think in some games there can be about 20% XT vs non XT

@@theadmirer_ I can get up to 50fps with game mode enabled and SMT disabled (6c6t). My GPU is barely utilized so this is a CPU or memory bottleneck. I'll report back after tinkering around a bit more.

@@metalman2506this was made with standard setting 12core. I do have m2 ss2 and low latency CL14 32g ram, but shouldnt make that much diff

@@theadmirer_ I only have 16bg of CL14@3333. I believe what is happening is that I'm running out of memory on NUMA node 0 and the game data is spilling over to NUMA node 1 and I'm suffering from a huge latency hit from having the game data crossing the infinity fabric between CCD's. Upgrading the RAM to test this would be too expensive so I think it's just time to play the game. I'll let you know if I find anything else out. Thanks!

I just launched the game from another windows installation on my PC and I'm getting 175fps. So something is broken on my "gaming" windows install. Thank you for uploading your video otherwise I have would have no idea my performance was so bad.

Works good for me 👌

Thanks

Hola. Sirve para televisión?

Hello! im not really sure what you mean, depending what you ESC can take, if it specified for 6S, you can if you have 2x 3S use them. Just make sure to connect them correctly so you dont mix parallel and series circuit

Thanks for your input, much apprciated! Great idea

Sure was fun!

Thanks for watching my channel!

Oh that's a really good question, got this one used. Probably around 2017-2018

Double checked, its the Kyosho Lazer ZX6 no.30046

Seems perfectly fine! I wish to try 4S on it, but what i have seen that is crazy fast for it to handle. Wish there was something between. The best thing was the extra runtime from 2600 to 3200, and the weight is very close to orginal

I run a 4s 2200 mah 50c in mine. It's ton faster on 4s!!

Maybe should make a video and test that? ;) I don't know, in the video was the first time testing and the distance is only how far i was comfortable going!

Thanks! Its so fast and great handling, good shape and think i was lucky to find this used one.

I have a team associated 74.1 and it out drives me LOL@@theadmirer_

Thank you too!

Thanks! Already bought some extra parts for it, preparing to run 3S on it. Got a wheeliebar, motor heatsink and fan. It seem to be able to take some beating and its a lot of fun driving it!

@@theadmirer_be smooth with the throttle. The e revo loves to ruin the differentials. TH-cam e revo shims and center diff upgrade. Enjoy!

Ohh really :( better take a look into that then. Might be ok with 2S it seems, but 3S will probably make it ruin some diffs!@@andresvillagomez75

Is was, aldo cool way to clean it! It has never been cleaned and is a atleast 20 years old motor. Im hoping its enough to use air compressor, let the engine run hot and i used hudy bearing oil

I think its fine as long as it is distilled water? Or a low viscosity oil

Destilled water would be even better to use yes! I will get some til next time

Thanks! I want some good proper tools in the future, to have at the work station. But these are good to have when im out playing. Travelpack tools for RC 🤣

@@theadmirer_ In my opinion MIP hex drivers are the best in the game.

@@JoevsRc will take a look!

They could deliver within 1 day 🫡 im testing 1 free mounth of amazon prime. But i agree some things are not very cheap on Amazon.

Thanks! It sure was better than i thought ;)

Its not supposed to be much faster :) upgraded battery for run time not higher output

Thanks for visiting! That would acutally be interesting, i just got into RC. Only had a few as a kid but im getting into it again. Absolutely love it, and i will take a look for some speed tracker device. 3.5 min sounds very low to me, my orginal is 2600 and i get alot more then 3.5. Is everything running smootly, have you greased it and taking out the flexshaft?

hi thanks for watching, im not sure actually! Never checked it, but around 17-18 cm

Thanks for watching! Sure is a great feeling taking that car for a ride

@@theadmirer_ i own one too. I agree.

@@CarClown Nice! how is your holding up ?

Thanks for watching my videos! Yes you are correct, i tried to find someone closest enough to original size but with better performance and higher capacity. The battery is just a little bigger but fits perfectly and was like 30grams heavier. Got probably 4-5 min increased driving time and i felt that the power was there for a lot longer. Perhaps Zeee batteries with 50c holds the power better than original.

Thanks for watching, its beautiful having it in my living room! Saving up so i can buy some more from the Tesla shop!

Thanks for tuning in! Means alot, it was my second time driving this boat and filming by my self at the same time. I do like more of a sporty driving, and feeling the acceleration. It is really fun when the boat reach a certain speed it really handles alot better and can take tighter corners. When it levels up, you can really feel it.

Agree

Hey thanks so much! This is so fun, i was only into watches before, but now i start to have fun with more stuff also 😁 i uploaded a video when i test it with much more space also, the handling is insane

Thanks, i should probably order that asap then!

Im glad i did, it was very dry and got hot! Do you recommend any special grease? I took what i had, Liqui Moly Silicone lube and some high temp resistant lithum grease

i don't remember anything unusual, sometimes they do smell weird but not like anything order electronic

Haha its very fun! Thanks

Thankas for watching. Yeah like first time using, old go pro hero 3 black edition laying around 🤣 will take some new videos. I like your car ;)

hey! Have you heard the Laptorr exhaust on these cars, saw a video today. I think i really have to save up. th-cam.com/video/HUiOq32NEhg/w-d-xo.html

@@theadmirer_ yes i did,wayyy to expensive i think, currently on a custom-ish exhaust setup(see my other vids)and i love it!! Not sure a Laptorr will justify the cost/sound improvement!!

Thanks for watching, you got some nice drone videos! Well i have to start somewhere, this is a very cheap drone so i can learn and maybe i like it and will buy someone better when skilled enough and can afford it!

Thanks for watching!

Thanks for watching. I think I show all settings in the video, but its 1920x1080!

​@stephenr-gr4eewhy? fps?

Hello, tested now. When i start my computer the 3 fans start to spin for 2 seconds then they stop. Im very happy that the fans are completely turned off most of the time, if i play a lot and it gets hot then they turn on.

@@theadmirer_ yeah I figured out the problem, my riser cable got unplugged from the mobo, card works thankfully