วีดีโอ

Can we use mks pwc with this?

Three-axis board with only two-axis control. What a piece of junk.

does this work with co2 laser?

excelente aun sigue pasando esto hasta en la version mks l v2.1 y con esta solucion se puede corregir el tema. gracias

I'm trying to configure the vesc tool so that I can use a potentiometer on the adc2 input, so that it works as a pedal-assisted power regulator on my bike, I use an accelerator on adc1 and a common cadence sensor, but it is dangerous to use the assisted pedal if you are using a profile with a lot of power, my intention is not to need to use a smartphone to change the profiles but just a way to change the assistance...

I'd like to know how a NORMAL person who isn't a programmer is supposed to know how to navigate all this information. I just want to restore the factory settings that I screwed up when I tried to flash grblhal onto my MKS DLC32 V2.1 card for my homemade CNC table. Good lord this stuff is a nightmare. Why can't it just be a simple "click on this and upload it" type of situation? How can you expect a normal guy to understand all of this crapola - which is one link after another leading to more and more files and folders and 404 alerts for failed links. Why do you need three tools to do one job - and why do you need to see a million different files and folders when you just want to perform a basic task? Holy Crapoly.

Mine just fails on build, somethin about FPSTR being defined twice, although not sure how

My vesc tool does not detect the 75300 but show the 75100 When run detect motor, vesc automately disconnect. Can u help me

Is the display a necessary component to operate the board?

Does your z Axis move when you adjust the "probe Z Offset" ? I have TinyBee and i cant get the Z axis to move to set the offset. I tried everything in this video. No joy Is there something about the board that wont let that work? Or does any one have a Marlin config where it actually works ? need for 3D Touch, Creality CR-10. I like the board. it be nice to get that to work.

I'd love to see how to connect this to an esp32. I am happy to see the MKS ESP32 FOC. I will start there, then maybe I will learn to program this board.

What button you use? Is impossible to make it work

Is possible to turn off the esc with button right? What button?

The hp84200 died on my after two days using very low amps do buy this escs guys

Is there any example for the CAN version?

How to connect BLTouch to the motherboard

is it compatible with the bigtreetech skr mini e3 v3?

I bought a flsun q5 and the board had turned out to be complete junk ad 3 yrs ago now they never responded back to help or troubleshoot or replace. The board is taken out now and no longer works. The section for the ribbon insert no longer holds ribbon for screen.

the solution definetly isnt to set the maximum offset higher, but to level your bed.... if youre printing a part at like 150mm, youll have around 1.5mm skew in it in the Z, /=| where the | is the top layer and / is the bed....

Could you link to the text file you are using for this config? I've spent all day typing in commands from your videos - and I'm still not getting anything out of my ODrive Mini V1.0 board. The documentation just links to a page in Chinese, which google translate only partly translates into English. The Git Repository only has some of the files shown in videos. I could really do with some help getting this running! Perhaps you could work out how to use it with the ODrive Web Gui? That makes the setup easy.

es compatible la pantalla ts35?

What happen with the website? 502 bad gateway error

Your videos are about as useless as your cheap knockoff boards

Is it compatiable with Tinybee?

Hi, is it compatible with MKS Robin Nano V3 motherboard? I have TMC2209 driver and simple Nema17 motors, and I would like to switch to closed loop motors.

o sea q no se puede usar via wifi con tu pc personal. xq se desconecta del wifi...jaja

Can we use key?

I have just put this on my K40. Lightburn does not detect it at all yet LASERGRBL does and can operate it (roughly but it moves). Any ideas?

no sale a cuantos volts trabaja esa controladora

hola, queria saber que controladora tienen para poder usar dos motores de hoverboard como motores de posicion, trabajan a 36v

hola, queria saber si ese shield me sirve para unos motores de hoverboard a 32v

The web is not avaliable:(

Tutor with lisp please

where can i download OdriveGUI.exe ?

ok, servo42D does support 1.8 degree steppers only. Also till its first calibrated the menu shows Cal, Mode, Exit in SR_vFOC mode. Also, the "MKS ServoD Control" Software does not work in Windows 10. Tried to re-compile, but the build Scripts are too old. I would have to down grade my Qt and all the build tools. Some of which won't work in my Windows 10. Probably can be compiled in UNIX, but I am not setup for this right now. Currently working with LDO-42STH48-2504AH for testing. Currently using CANable on COM3 for testing but know default Serial spec is available for the Windows 10. after messing with the Serial port settings in Cangaroo.exe this settings kind of work (Baud: 38400, Data bits: 8, Parity: None, Stop bits: 1, Flow Control: None). There appears to be more flavors of can out there then their stars in the sky. It would be helpful for the Firmware for the MKS SERVO42D Moter controller. I probably won't be able to build it, but it would be a Step in the right direction to get my printer firmware to control it across CAN Network. This is assuming i can reload the MKS SERVO42D Moter controller board. Anyway, that's it for now

i tried this on my 75200 but it does not work. even when i just put ad/dc15 wire directly to gnd nothing changes. cotroller is set to "control" software i set to always off .

Ok, got it, menu dos does not show up in SR-vFOC mod.

What is Bluetooth connection for 75100: COMM or UART2 ?

Hi. I have question. If we follow the steps in the video and open the serial port, a lot of data will start coming in. Is this normal?

I did everything as in the video instructions. Everything was successful. But on the next connection, the computer does not see the controller. Installed drivers. Tried on Windows 7 and 10. Nothing helped. Please help.

I just performed setup with the x2212-kv980ll motor but when I turn power on the motor does nothing. Am I missing something?

Don't buy anythung thauses a computer voice as an instructor....

How come my sero42d does not have this menu. I only have calibration, mode and exit. Also canguroo , sometimes works for me on my windows 10 box. Any tech help is appreciated

How come my sero42d does not have this menu. I only have calibration, mode and exit. Also canguroo , sometimes works for me on my windows 10 box. Any tech help is appreciated

Can you post the source code for the firmware? The C and D models don't have it on your Github.

Здравствуйте. Всех парней с праздником! Подскажите чайнику: перемычек много, куда их вставлять (под драйверами)? У меня стоят по 1 перемычке, моторы работают, НО плата не реагирует на концевые выключатели. Концевики 2pin. Заранее благодарю

More ves videos pls

can you fix the website please, it doesnt load, but also flags certificate problems. thanks

Жесть! Видео "полезное" ). Нужно назвать видео "вставляю ПРАВИЛЬНО штекера с проводами" 🤣

DO NOT BUY THIS BOARD!! Makerbase has given up on it and is no longer maintaining the firmware