วีดีโอ

Sweet! How is it going so far with your washer? Mine is still going strong.

Not sure what D4 is 🙂

@@jonastriesanything ya me dijeron que es cuando no entra el agua y es cierto porque no abrí el agua caliente Gracias

To activate spin only mode, you need to follow these steps: 1. Turn on the washer 2. Set the Load Mode (using the center turn knob) 3. On the menu options (bottom of were the LCD indicator is) you’ll find 4 buttons (Temp., Rinse, Spin, Soil) 4.Press and hold the “Spin” button (the one with the label *Spin Only”) for 3 seconds. This will set the washer to spin only mode. The washer will activate the water suction action (drain existing water) then after that the spin cycle should begin. Hope this helps 😄! And please subscribe!

@@jonastriesanything thanks

Cool

Why are you being a dick when you’re gold gavino, hes new

Thanks! Yes I did 😁. Was trying out how it feels to not have a crosshairs

@@jonastriesanything hahaha its much harder

Sure

Iron3

Could be a bad ball bearing on the CV axle. Sometimes during higher speeds the loose ball bearing sticks to the bearing case due to the centrifugal force.

Thank you 🙂!

I wouldn’t recommend driving the car. You’ll risk adding more damage to the gears. I would have it towed if you’re able to.

@@jonastriesanything thank you yes I towed it

Thank you for the kind words! Glad my vid was able to help you friend 🙂!

Thank you for the kind comment! Having a speed loader adds efficiency and more fun during plinking sessions 🙂. Knock on wood during war times, having the ability to load a magazine more speedily could be a determining factor for survival.

@@jonastriesanything thanks a lot for the swift reply i think i'm sold cheers

May I ask what problems you ran into?

@@jonastriesanything After 2 years of it started to randomly mess up. When starting a wash cycle it would fill water then drain over and over. Had to disconnect it for an hour. Other times the self lock would also act faulty keeping my wet clothes inside. I’ll never buy Samsung again

Uhm not sure 😅. I just started playing like two weeks ago. How do I know what is my rank?

I just found out today. I'm actually Iron3, hehe.

There are two power supplies. One for the DVR and the other for the camera wires (octopus connector). This one is for the camera wire.

I believe it’s about 150 lbs. had to use a dolly to get it up the stairs 😅

Oh, let’s see how long this lasts but it’s still going strong

Ooohhh yes! No more door slamming when the kiddos run the laundry 😁

On the mother board, yes. LG tech connected it during his troubleshooting.

​@jonastriesanything I have had a LG service tech out twice for a brand new refrigerator that will not cool below 40deg set to 33. He has thrown a couple parts at it with zero troubleshooting. Seems to be a common problem for the model I bought. I couldn't find any videos of such a device to aid in troubleshooting.

You’re welcome 🙂! Glad it was able to help you!

This is 5.5 cubic feet capacity. Handles heavy loads pretty well.

Oh, may I ask where you got that info?

@@jonastriesanything they make a Girsan Regard with a stainless steel finish, gold colored controls, including the trigger, and white G10 type grip scales, with pictures on them. One version has a picture of Santa Muerte, and it says "Santa Muerte" under the picture. It's pretty obvious that this version of the Girsan Regard, is marketed towards gang members, and drug cartel members. I can't think of anyone else who would buy it.

@@jonastriesanything they also make a Girsan Regard 9mm 18+1, that has an entirely gold finish. However, Beretta makes one as well. A gold colored pistol is pretty tacky. I can only imagine the type of person that would buy one.

Sweet, glad this vid was able to help you! Hope your camera system will be up and running soon!

@@jonastriesanything Yes, thanks for the reply, only to find out that the strip it was in was not working but still going to make sure of all the other plugs I tried you trick though, only to discover no light on that main snake plug (rectangle box that you speak of and point to in your presentation.

@@jonastriesanything Our cameras are back up and running, Thanks once again for this clear and precise demonstration. t was the 12v power supply that feeds the octopus wires.

Thanks for the heads up! Yes, it’s important to check and double check and inspect equipment before use. Retighten bolts and screws and make sure attachments like foregrip, braces, sights, etc are properly installed 🙂👍

Oh yes! Still in commission and going strong 🙂!

Sweet! Thanks for the tip! I’ll check that out 👍

For mine, it was the central pinion gear was full stripped of its teeth. Literally grinding metal inside the rear differential gear box 🥲

@@jonastriesanything I have an 06 grand Cherokee Laredo and it does the same thing but also locks up my rear right, could this cause that as well?

What year make & model is yours bc I have a 97 Grand Cherokee doin the same thing​@@jonastriesanything

This has a finger break (a push button) that you need to press before the gun is released from the holster. So it is a level 2 retention holster 🙂

​@jonastriesanything Thanks. But it won't accept a Viridion laser, though. Are you aware of any OWB L II retention holsters that will?

Center pinion gear teeth were stripped.

Check if your LG fridge warranty is still valid. The purchase warranty for mine was 5 years and we barely hit the end of warranty life. LG replaced our compressor for free. LG tech said the compressor itself has a 10 year warranty.

Call LG customer service. They will fix it because they know its crap.

I’m both fans don’t usually got out at the same time though it is possible. Could also be a problem with the motherboard if multiple parts are not working at the same time.

I replaced the entire rear differential gear box. Bought one from EBay motors that had all working components.

I’m not sure. I’ll check it out 🙂. This one is still working great. Used every time my fam goes out for adventure trips.

Sweet, great tip!

Seal was not broken. I simply slid the panel underneath the shingles.

When charging the power station itself, yes. When it’s fully charged, then you can use this as a mobile power bank or car battery jumper

If you connect a monitor to the DVR, do you see a black screen? If the voltage is good for each line, then check if there are any errors relating disk drive or other parts.

No, it was the central pinion gear inside the rear differential gear box that broke.

Thanks for the comment and support!

The installation is pretty straightforward. Attach the red water hose to the hot water line and the blue one to the cold water line. After that, turn on the water faucets and check for leaks. If no leaks, plug in the washer electric wire to the wall power outlet.

You can but it’s a bit tricky. I just take the keypad off coz it’s easier for me 🙂.

Bad compressor.

LOL!

Black is negative and red is positive.

It really is! Very reliable as well! Do you have one?

yes, i have one and love it but did have a few issues at first but kel tecs amazing customer service took care of it @@jonastriesanything

Thanks for the tip! I’ll make another video with close ups

The video shows the sides of this ascent. This is 2021 though 😅

The price of the roof rack? It was less than $200

The take down process is pretty straight forward. Push the button part of the take down lever. Once pushed, turn the take down lever downwards and the slide should release. Are you able to move the slide at all?

@@jonastriesanything yes the gun seems to function just fine. But the take down lever won't budge

At the beginning of the cycle, the tub rotates slowly. During this stage, the washer determines the weight of the load. After that, water should pour in and the cycle starts when the tub is filled up with water.