วีดีโอ

I just removed my sherpa steed after 8 years only needing it twice. One of the issues I had was with the control box an older model than yours, the thin connection pins corroded and sherpa wanted me to replace the whole box- no parts available to replace the pin so I ended up getting a wireless part on ebay. After 8 yrs it stopped working I pulled it apart to service it only to find that the electrical connections to the brushes all had turned to dust and all bearing seized. I also notice some of the bolts connecting the gear box was bit cheap, half a hex head were missing. I saw the same underwater test add. They do have good seals, must of been condensation which corroded the electricals on mine. Also check the winch rope.... After researching splicing dyneema I found that the sherpa rope was spliced incorrectly. It only had 1 foot returning in on itself and not tapered...

Did the bumper make your front end sag, or did the truck drive any differently?

You are a title this your history class

love the cross brother

Not sure how to connect wire for throttle side go's

Thank for the video...I just bought mine today and I noticed my phone was rotating due to that screw being loos

Really like the cross! Sounds great. Thanks for posting.

You didn’t need any canbus modules or anything?

Where did you order the bars and the plug n play wire extensions from

I did the kahuna grips. Everything at the fairing. No wiring anything toward the battery. Hate to say it but that was a much easier way to go.

Wow, you make it look easy. How much taller are new bar compared to stock ones

Thanks. Simple steps that can save a rider a lot of money. Thanks again

I have a 2017 Freewheeler and looking for a rider backrest. Would you know if the mounts would be compatible between the TG and the FW?

I have the same bike and I am wanting to do the same bars but I’m considering 16’s instead of 14’s. Are you glad you went with 14’s? Do you know if there will be anything different for the install of 16’s vs the 14’s if you use the same brand just different height?

Good stuff.made my job easier ty

Would be the same on a 2023 Tri Glide Ultra classic.

It’s crazy I have a Jeep YJ myself which I daily drive and also a 2018 Ultra Limited also with the twisted cherry color. Also went to my closet Harley dealer to get a quote for the 12” apes at wildcat Harley Davidson and they quoted me $2700 for everything that’s parts and labor out the door. I was like nope you all are crazy. Got to looking at the quote they were trying to charge 13.5 hours labor at $120 per hour. I’ve been looking to try and get my bars replaced which isn’t easy given the small town here in Ky I live in. Great video brother. Ride safe.

Did thus works well

Thanks for sharing

Great video. I may switch mine on my 13 tri glide.

Loved this video! New subscriber!

very few videos on this winch.. couple have negative ratings, you have hade this for a while, what is your overall fillings about it? are you still happy about the performance? I got a bigger truck and need a bigger winch then most companies make

That's a good find

You're a butcher. Did just bout everything wrong.🤣

Always awesome! Miss you dad rest in peace love you.

You do not need no extra cables if you got throttled by wire it's already set up or heated instructions is dominant garbage you're useless

Appreciate you doing this video. Harley is terrible with instructions. Thanks for doing the video.

Did you hook up the hot to the other wire for key power? How did it turn out?

An isolator is a must-have. If you have power to your winch constantly, any front-end damage will result in a loose live wire, which would increase the chance of under-bonnet fires. Scintex sell a simple isolation switch that disables the winch wiring. This has the added advantage of preventing vandals from being able to damage your vehicle using your own winch. A fuse or circuit breaker is not recommended because it adds a more fragile point of failure than a physical switch. When you rerun your atrocious electrical work, it would be worthwhile to install an isolator. When you have a bit more confidence with your wiring skill , In-Cab wired winch controls (and maybe even an isolation relay) are a very useful upgrade.

i bought the saddleman road sofa on ebay it gave me upper thigh groin pain less then 20 miles i had to take a break then get the harley go back home. i sent the seat back to ebay Saddleman vender recieved my large funds back. ( Great comford drivers back rest ) & Great looking seat to sell ya road glide to a yuppie that it,other than tat beauty is skin deep ! I BOUGHT A MUSTANG SUPER DELUXE with the exspensive drivers back rest,,,rode my harley 500 miles no upper groin pain then bought a Mustang Lowdown for my wife she is 5'2 tall and rides a trike she loves tyhe seat we are very happy.

why would you weld up thar hatch? most people cut out a hatch and fabricate a cover. saves dropping the tank to du pump service. I did, welding it up don't make sence

Love your videos, keep them comin

I have been looking at these winches for a while, are you still satisfied with it?

Great idea. Thanks! Just saved me 40 bucks that I was about to drop on leather wrap. I have a whole bunch of paracord already in my garage

"I Love Heroes Hayden Panettiere"

You comment that you will show how to reroute the cables when you get to that point but you never did. Other than that the video is very informational.

Do you have to remap for these?

Well shyt ... i guess ill have to go get that accessory harness .. unfortunately i live 2.5 hrs from and dealership

Great vid my question is this I have a 21 triglide and bought the KST 14" Mayhem bars with 10" extentions for wires. My question is the gas tank and clutch cable extention a must to instal those bars?

I am about to order the steed 17,000 pound winch, however I am stuck between steel cable and synthetic rope. I am familiar with the pros and cons of both and I am also kind of leaning towards synthetic rope. Can you elaborate to me why you chose the rope over cable? I will be putting it on the front of my ram 4500 wrecker inside a peacemaker bumper.

How did these affect your performance? Did you lose bottom end power?

Thanks for this video! I have been struggling to decipher the horrible instructions LOL! This was exactly what I was looking for putting heated grips on my 22 street glide.

Awesome video!! Made installing heated grips a piece of cake today on my new Breakout 117. Thanks for your service too!!

Great video. Didn't know about this company and was expecting higher prices.

Thanks for the video. Very good! Did you ever find out if the purple wire was keyed ignition? I want to hook it up to keyed ignition as I will surely leave them on and drain my battery. Thanks.

Great video. I'm part way through an install and the instructions provided by Harley are not so great. This will help me finish up. When I fed the left grip wires down through the bars I pretty much had to loosen the bars to tilt them downwards to get a set of needle nose pliers into the hole and pull the wires out.

This video was helpful, but the music fading in and out is pretty distracting

Great video, this will make my install a lot easier. Hopefully it won’t take two years to get my mufflers off. Lol! Thank you!

What is this certificate. of birth? I bought the same bike, but did not receive a certificate. Would like to know what number my bike is.

i got a question. i want to do the same on my harley but my shifter is on the right side (harley sportster xlch 1974) im having a hard time thinking of a way to get the jockey shift from right side to left without much problems.