วีดีโอ

I went with a t3 flange, I knew I was only going to be running 7-10 psi so the t3 is plenty for that

I've been daily driving on them for the entire time, probably put 10k+ miles on them and they are still really solid! Definitely worth it!

That's awesome dude! I'm glad the video helped!!

I'll definitely pass that information on! Thanks for letting me know

Hey! I will definitely get the part number for you tomorrow!

Hey man! Thanks for the support! I believe Its a 3.15 LSD from a z3 which are pretty high gears but was definitely going to hold the power and torque

I ended up swapping to a link ECU temp sensor since it's alot more accurate

@@ProjectRacecar2 thanks 🙏

Thanks man! I would definitely think this would fit since the z3 also has an m42 option, but I'm not sure the size difference from e30 to z3

@ thanks for the reply. I know the front subframe is the same as the E36. It might fit. Im building my k24 and use a lot of your videos as reference. Thanks a lot man. Cant wait to see a burn out video.

That's awesome man! Yeah I could definitely see the exhaust manifold fitting in there easily since the k series is much smaller than the m50s but good luck on the build let me know if you have any other questions! Tf works manifold is pretty slim and close to the engine

If you are putting it in a Corolla the transmission tunnel is likely pretty small so potentially an s2000 transmission might be the move, but you would still need an adapter

@ProjectRacecar2 do you think 4agze transmission is good for k20

@@Ahmad_shishani-2jz the k24 doesn't make a ton of torque which is good, but you would have to find an adapter that works and the correct clutch and flywheel which might be tough

@@zubi1638 that will be awesome! The k24 is very similar to the m42 but has much more aftermarket support! Good luck and let me know if you have any questions!

So since fixing the map sensor issue the car actually stopped running well because the numbers were so messed up, so my goal is to get it idling and get it ready for a dyno session, I obviously couldn't bring it to a tuner until the map sensor was working!

@ sounds good! Eagerly anticipating the next video. Cheers!

I haven't heard of it causing too many issues but I will definitely look to see if there are any good options for that!

Yeah that's what I've heard, they can get damaged in shipping but at least I know what to look for in the future

Thanks man! I definitely don't know a lot about electrical either so it's a big learning curve but we are definitely getting better!

Glad to be back! I wanted to make sure I found the issue before I uploaded! Hopefully this was the fix!

That would be super interesting, I think that would really depend on the size of the transmission tunnel, I think some Mercedes came with a zf transmission which is the same manufacturer as bmw so potentially a bmw transmission out of a 325i e30 since it's a relatively small transmission

Dude that's awesome! The m20 is still sweet and it's always good to have it all running and driving!! I'll check out those shorts

It comes in the bmw e36 328i and m3

I was moving from my parents house and didn't know the last time the clutch had been replaced, and didn't have a garage lined up so it was a bit more for peace of mind than anything else, but true they put in work

@@richardgraham65 ?

@@bpvanzee thank you! Also that's sweet! Suspension is always my favorite, but that's awesome good luck with the swap! Let me know if you have any questions!

It's listed for $5000 which is close to everything in my area

@@ProjectRacecar2 great price ! I hope it sells bro

Great to see you back. If you were closer to KY I’d love to take it off your hands.

What area are you in

Interested

@@Myknuckle thanks for the engagement man it really helps out the channel👌🏻

I'm not sure since this was so long ago, but I would definitely recommend it, you never know when the rear main seal is going to start leaking and it's super cheap also make sure to put in a new throw out bearing as well

You can definitely diy it! They turned out really good and the covers make it super easy! Thank you for the kind words I'm glad the video helped, let me know if you have any questions if you do it!

@@ProjectRacecar2 Thanks man! Also, I was wondering if I should replace the seat cushion foam while I’m at it, but it is really hard to find for the non-sport seats in my E28. I’m wondering it I should switch to sport seats, since it’s easier to find replacement foam, and the struts seem to be shot in the driver seat anyway (it collapses if you lean back too much). Thanks again!

@@nomaddict5279 sport seats are really nice! I think they look really good, they have been a bit harder to find but if you can find some at a good price I would definitely switch! And depending on how the foam is you can replace it, I decided not to since mine but at the time I didn't realize the replacement foam was available

I got them at Lseat I think they are a really good price and easy to install

@@kevincody01 the color I went with is called tan and I matched the stitching with it, saddle is going to be pretty dark

Hey man! I'm sorry I didn't mean to worry you! Yeah it's been a super busy two months, and I felt super bad about not updating you guys!

Thank you so much for the positive words!! But absolutely the vet bills can be rough but it's really good to see her responding well! We will definitely be making progress on all the cars very soon! I'm really pumped to drive the car! Thanks again for the support it means a ton!