วีดีโอ

Thank you for the information! We just purchased and transported a vs 640 and it will not take ink. Can I get a copy of the service manual mentioned in this video? Thanks for your help!

I’ve got a SC-545EX that needs 6 print heads, do you have any half way decent used heads to get that thing printing again? It’s just to keep our stickers printing while we save money to replace 3 heads on our VG 😢. We didn’t want to buy 6 new heads for that thing when we need to buy heads for the VG lol. So if you got some discount DX4s lol😊

Hi Mike! What you're doing is nothing less than heroic! I just got offered to buy my friends XC-540 for less than $500 with two clogged heads and a stuck heater relay. Plus I'll get six rolls of different material and 7 cartridges of ink. My goal is to start doing print jobs and use the earnings to gather new parts for the machine. I'm pretty sure the gold plated heads will work for the roland xc-540, right? Better be safe than sorry to not have asked. One can't be too sure. Thanks a million times for what you do for the community! Kind regards from a soon to be dx4 printer owner.

I have a few deflections causing some banding in my cyan head on this same printer. Think it would be worth a shot to try a head soak before replacing it?

Good morning friend, can you help me? I have a Roland SP 540i, it started to fail in magenta, I replaced the dump and cap station, but I ended up breaking the magenta plastic connector where the dump connects. So I took the connector from another disposal head and put it on this head. Until then the black and blue was normal. But after doing this, it no longer fires both heads, the white test print comes out and the printout comes out too. Can you advise me if a security lock may have occurred on the machine, and where can I unlock it in the service mode panel or directly on the equipment? I needed to deliver some work and I've had it stopped for four days now. Thanks for your help in advance

Hi Mike. I think my fuse or transistor is dead. How easy is it to change one of those yourself. There's no roland techs in my area so I either have to send it to another country or do it myself

awsome video

Do you have video on how to replace the scan motor on a SG 540 Truevis machine. TIA

Your videos helped me a ton. THANK YOU! I bought an old SP-300V, and knew nothing about it until my Magenta dropped out and then Yellow. Turned out to be the cap top needing replaced. I got some spare parts and consumable with the machine. I didn't recognize the dampers in the video, how can I tell mine are OEM or not?

This video saved me a lot of time. Thank you man

I want to send you a picture but I don’t know how to

My Roland vp-540 is printing shadows or background colors

What software were you running to make this unit work? You mentioned illustrator with rasterlink. What version and what operating system were you using it on?

My black and magenta... cyan still good

Hi, I have a VG two 540 and mine is dry as a cactus when you say the solution is the cleaning liquid TR2 solution that you were talking about ?

On my Roland Versacamm VS 540i I have done multiple head soaks over night and cleaned it manually many times however I cannot get the Magenta, cyan, yellow and light grey colors on the nozzle check print pattern to print fully I get about 50% of the lines what can I do?

Man… u are good 👊🏽😮‍💨

Mike, another great video. I order cap tops ($15) from Digiprint, If I order 10 or more thay are $10 each, but the shipping is $14. Who is your rep at Digiprint? Do you think he can adjust the shipping price for me? They ship from the Dallas TX warehouse and I am located 120 miles south of Dallas, and think $14 shipping for 10 small captops is outragious. They only weight a few ounces to ship.

I just bought a VersaCamm VS 540i and it was sitting in storage for years so the head was probably dry as heck. I've tried 2 long term head soaks. The first head soak did help it help bring back about 25% of the missing nozzle check marks but I still have about 40% missing lines especially on yellow magneta and cyan. What else do you recommend to do? Should I keep trying more head soaks? How do I know when its just time to replace the head?

Nice. I tried this w regular cleaner. Got better for sure. But not there yet. Using alot of ink in the process. Does anyone trust / have long experience w any Non Roland Inks????

Where does one get this syringe?

Hello sir. I currently having a problem with Vs 640. can i contact you thru email?

You had new head caps on. Can I still do a head soak with my caps being used? I just swapped them out in January. My cyan is clogged up from a company move we had to do and it sat while we were moving and getting set back up. ALso, are you using the TR2 Cleaning Solution?

Hi. By any chance, do you have a video on how to do a cap ink pull with a syringe on a SG300? I did a few head soaks from watching your videos. But my cyan still has a couple of clogged nozzles.

im dealing with the same thing rn lol

Where are you located?

Hi, Yes tried this with 2 machines. It allows me to change the date, but reverts back to the original date which was previously set. How do you manage to save the setting as it is not on the video.

Mike, thanks for doing these vids! I was able to change the cyan/magenta head on my SG-540, but now Im getting an alignment issue. It's like the black isn't lining up and the image is fuzzy. What would be the next step to stop that?

How long can I print head go without printing on average.

So my vg 540 just quit printing in h1 and h4. I have replaced all cap tops and idk what else to do

Thanks Mike, this info is CRAZY VALUABLE! Life Saver!

can you help me whats your email

Hi Mike, I have a Sp540i and 6 months ago I replaced both dx4 heads and both cuptops. Now the test shows me that I have several shifted nozzles on black and blue. I do manual cleaning regularly, but it seems to me that more and more nozzles are not in place. What should I do?

Replaced the head on my sg540 dont know how to add the head rank or wjere to find it.. i bought the head on digiprint .im also. Stuck on a message that says canceled to protect pump..please help

Hi there. Thanks for your video. After I change the year in date change mode what button do I press to save the change. Each time I change it it reverts back to 2024. Thanks for your time

. I have set year to 2022 but the printer keeps reverting back to 2024. It doesn't seem to save the setting. Any tips?

Hi there. I have set year to 2022 but the printer keeps reverting back to 2024. It doesn't seem to save the setting. Any tips?

Hey man. Thanks for all your vids. I am looking at buying a used Roland True Vis VG640. Is it easy to factory reset? They say it was pulled from a working environment. Its an older machine but I am just getting started with this and its a good deal from a good source. What do you think?

Im stuck with a message that says " cancled for pump protection" how can i fix this

Do you think I would be able to replace the cyan printhead myself? and where do I get it? I may need your assistance.

what size syringe are you using??

Can we get a link for the dampers replacement?

Hey, I'm looking to buy heads and cleaner but the page isn't working. How can I do it? Thanks

Any videos that would show a way to get to this point cleanly, so I could get a full break down of start to finish. Thanks for the vid

thank you for making this video

it is nessary for Newbie one to learn software form this video

Hello. Thanks for the video - very helpful. We just replaced one of the print heads on one of our XR640s. I failed to save the packaging and don't have the head serial number. However, I did take photos of the head and there are numbers on it. Is the serial number on the actual print head? Just curious. If not, is there another solution or work around for this issue? Thanks in advance. ~Tim

Sire, how i can connect with you?

Are the DX7 printheads for Mimaki CV150 from DigiPrint supply good?

Where do you get the CJV150 oem printhead? I currently need one. Thanks!