- 2
- 21 727
Wheels and Welds
Canada
เข้าร่วมเมื่อ 16 ก.ค. 2019
E46 Steering Rack Swap into E30
The E30 originally came with a very slow steering rack so I decided to upgrade mine with a gold tag steering rack out of an E46 while I had the engine out. I'll show you how to make the E30 inner and outer tie rods fit the E46 rack and how to bend the power steering lines.
มุมมอง: 12 820
Mr Sluggo 😮 No! Don't do it..😢😂😅
Back in the day when they could be 'easily' rolled back lol
Ye but a fraction of the cost of a new car one today and you could fix them not throw them in the bin 🤔👍
Agreed, fixed the odometer gears on this one. Hopefully goes past 400k
Does this mean you're gonna be working on the E30 again and keeping us updated?!?
Lots of work has actually gone into the car, just stopped posting. I'll try and put up some more stuff though, appreciate you actually following along!
@@wheelsandwelds5565 loved the work and the way you presented it 👍
Should have shown what todays ones look like
A microprocessor. And a digital display.
So?
Wow looks complexed
Just complex. There's no such word as complexed.
Hi. Thank you for this awesome info. I just want to ask about locking the e30 inner tie rods to the e46 steering rack (since there is no locking plate used). Thank you.
This video was a God send. Thank you. I'm changing racks as you did but I went with a Z3 rack and things were shown so well in your video that when I got lost all I had to view your work and things all worked out great. One thing I did do, because my engine was in, was to get the old rack out and new rack in I loosened the engine mounts and lifted the engine an inch and the rack came right out and the new one went right in. You showing the power steering hoses and how you got them to fit was so very helpful. So thanks again!!
so, the two spacers required are for the steeeirn column to extend the reach so that the column can be inserted into the rack? am i right? are there any spacers required at the mounting points of the rack onto the subframe?
Hey did you cut that rubber fin piece on the top of the new rack spline? Cant seem to get mine far enough down gonna try and put it on the steering wheel side
Only video showing the bend angle. Thank you. I’m assuming this bend should work on a z3 rack?
Hi which company bolt spacer did you use? And what is the rack end you use?
Garagistic has a kit and it’s cheap
Best tutorial for this swap on youtube! (even the germans struggle with the some explanations). Thanks! How much of a pain do you think this is without having the engine removed? (4 cylinder in my case)
Thanks! Im not sure how the 4 cyl compares to the 6 cyl but I know the 6 cyl oil pan interferes with the rack removal so you have to bend the bottom mounting tabs to be able to slide it out downwards instead of frontwards. I imagine the ujoint from the steering column to the rack might be a little tricky as well with everything in the way.
Thanks for posting this. I’m about to swap the same rack into my E30. Surprised no one asked but how does the rack feel?
This is my first e30 and I didn't even drive it before the swap because it wasn't registered for the road but I can tell you the steering is very quick now especially at high way speeds.
Thanks for explaining the bend. I am going to be doing this in the next week and will be coming back to this video for reference.
No problem, hope the swap went well!
Great vid Man, thank you!
Thanks for the very clear demo of the arrangement and bending angles. Everybody else just says "minor bending required".
No problem. That's exactly what I had trouble with too, no details of the bending required so made sure to cover that
thank you x 1000000 for making this video
No problem! I didn't find the most clear instructions when doing my swap so I tried to make it straight forward
atm doing a conversion for my e30 and this was the best vid i could find, cheers bruv
No problem! I actually found it to be pretty straight forward. Routing and bending the lines was the trickiest part I think
Do the e30 steering rack bolts for the Oil lines fin in the e46 rack?
I don't remember to be 100% honest but I want to say yes because the factory e30 oil lines bolted up fine. If the bolts were different, there would probably be issues
DAMN I thought u were going to drop the engine in with the rack studs reversed. Good catch that would of sucked in 10 years.
That would have been brutal! I had them from the top down just during the fitment of the rack so I did not have to bolt it down fully
Thanks so much for making this video. Very informative and well filmed!
Thanks a lot! I wanted to make a simple to follow tutorial for anyone looking to do this from start to finish.
i dont mean to be so off topic but does anybody know a tool to get back into an instagram account? I stupidly lost my login password. I appreciate any tips you can give me.
@Ignacio Bronson instablaster :)
@Leighton Emerson thanks so much for your reply. I found the site on google and Im in the hacking process atm. Takes quite some time so I will reply here later with my results.
@Leighton Emerson it worked and I actually got access to my account again. I am so happy:D Thank you so much, you saved my account!
Thank you for this! Subbed
Awesome, thank you!