- 216
- 303 476
Brody Fontenot
United States
เข้าร่วมเมื่อ 26 เม.ย. 2020
Just a guy who loves fixing things, especially dirtbikes.
I've been working on my own bikes for over 10 years now, but every build is just as fun as the last!
I've been working on my own bikes for over 10 years now, but every build is just as fun as the last!
KTM 500 Goes Skiing
Had the KTM 500 EXC out for a rip, after it snowed a little bit, snow or no snow, you know its going to shred!
Patreon: patreon.com/BrodyFontenot
* Memberships are all we got right now, but more is to come!
** TH-cam memberships are out now, so if you don't want to go to Patreon, you can do it right here (Also YT takes 30%, patreon doesn't)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
LINKS
✅Subscribe: bit.ly/3xLBuHp
🔺2nd Channel: bit.ly/3dYejRk
Instagram: brodyfontenot28
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TAGS
KTM 500 Goes Skiing
KTM 500 Goes Skiing
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Patreon: patreon.com/BrodyFontenot
* Memberships are all we got right now, but more is to come!
** TH-cam memberships are out now, so if you don't want to go to Patreon, you can do it right here (Also YT takes 30%, patreon doesn't)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
LINKS
✅Subscribe: bit.ly/3xLBuHp
🔺2nd Channel: bit.ly/3dYejRk
Instagram: brodyfontenot28
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TAGS
KTM 500 Goes Skiing
KTM 500 Goes Skiing
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
มุมมอง: 326
วีดีโอ
KTM 500 EXC Trail Riding With A Brand New Top End
มุมมอง 401หลายเดือนก่อน
Today we've got my uncles 2012 KTM 500 exc out riding after doing the top end and some other motor work. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TAGS KTM 500 EXC Trail Riding With A Brand New Top End KTM 500 EXC Trail Riding With A Brand New Top End ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
The Right Way To Rebuild A 2-Stroke Exhaust
มุมมอง 684หลายเดือนก่อน
In today's video we rebuild the FMF Turbinecore 2, on the 2003 CR250. I show you how to fully take it apart, clean it, and properly repack it, so it will last for a long time to come. This video isn't exclusive to turbinecore 2's or fmf's, it is pretty much the same procedure for all 2-stroke exhausts. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Insta...
How To Get 12 Volt Output From A CR250R 2-Stroke
มุมมอง 582 หลายเดือนก่อน
In todays video I show you how to get 12 volt output out of your cr250 electrical system. This would be to fun a headlight or computer as I did. Trail Tech Computer Install: th-cam.com/video/ESxconUxCjM/w-d-xo.html ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC Lakey Inspired ▬▬▬▬▬▬...
Trail Tech Voyager Computer Install! | CR250R Two Stroke
มุมมอง 1972 หลายเดือนก่อน
In todays video I show you how to install a trail tech computer, specifically, the voyager. This is the more budget option to the trail tech voyager pro, which is touch screen with more features, but this one still has a lot of features. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSI...
250 SX-F Killing The Trails
มุมมอง 2753 หลายเดือนก่อน
Just because it's a motocross bike, doesn't mean I can't go and rip the trails... *controversial topic* but I think moto bikes are better for trails than trail bikes, just saying ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TAGS 250 SX-F Killing The Trail...
Number 1 Reason Why Your Trails Are Destroyed
มุมมอง 2564 หลายเดือนก่อน
They are pristine for me, but they are probably destroyed for someone else... It just needs to rain! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TAGS Number 1 Reason Why Your Trails Are Destroyed ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Pit Bike Fork Rebuild | 2000 Honda XR70R
มุมมอง 1274 หลายเดือนก่อน
In todays video, I rebuild the forks on my xr70 pit bike... I think most pit bike forks are either the same or very similar so even if you don't have a honda, this video might be useful to you. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC Lakey Inspired ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ T...
250 SXF Ripping The Trails
มุมมอง 2215 หลายเดือนก่อน
First ride with the dirt tricks timing chain tensioner. Didn't notice a difference with the new timing chain tensioner and I made sure to break it in the right way... pinned! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk Instagram: brodyfontenot28 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TAGS 250 SXF Ripping The Trails ▬▬▬...
Dirt Tricks Timing Chain Tensioner Install | KTM 250 SX-F
มุมมอง 2.7K5 หลายเดือนก่อน
Dirt Tricks Timing Chain Tensioner Install In todays video I show you how to install Dirt Tricks timing chain tensioner for KTM 4-stroke models. *not sponsored Link: dirttricks.com/shop/chain-tensioner/ktm-cam-chain-tensioner ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk 💻Website: singletrackchannel.singletrackyt.repl.co ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MUSIC ...
CR250R Off Road Ripping With A Hurt Knee
มุมมอง 2.3K5 หลายเดือนก่อน
Hurt my knee a couple weeks ago, but its good enough to get riding again! Had to dust off the CR250 but it still runs amazing, even at high elevation. Some of the roads were washed out so it made for some good riding! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ LINKS ✅Subscribe: bit.ly/3xLBuHp 🔺2nd Channel: bit.ly/3dYejRk 💻Website: singletrackchannel.singletrackyt.repl.co ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TAGS CR250R Of...
Riding A 1999 YZ125 Like A Snowmobile!
มุมมอง 32510 หลายเดือนก่อน
Riding A 1999 YZ125 Like A Snowmobile!
First Ride Of The 2002 YZ426F Build!!
มุมมอง 6K10 หลายเดือนก่อน
First Ride Of The 2002 YZ426F Build!!
Finishing The 2002 YZ426F Bike Build!!
มุมมอง 1.5K10 หลายเดือนก่อน
Finishing The 2002 YZ426F Bike Build!!
Starting The YZ426F For The First Time!!
มุมมอง 4.7K11 หลายเดือนก่อน
Starting The YZ426F For The First Time!!
Cerakoting Parts For The YZ426F!! | Cerakote Guide
มุมมอง 514ปีที่แล้ว
Cerakoting Parts For The YZ426F!! | Cerakote Guide
Just bought a 2024 Ktm 500 last week. Been riding those hills for 20 years! From Carson pass to top of the Pine Nuts. Paradise on the KTM.
Very nice build, imho the 03-05 yz conversion throws it off and doesnt make it look like a 426 anymore. Too each is own!
Yeah, I know what you mean, I liked the seat setup for the 03-05 better, and it makes some people even more interested in the bike.
@@brodyfontenotI gotcha. I have a 01 426 and 05 wr450f. The 05 seat is definitely a little thinner and more firm. I like both
3 Years later. I am here to say that this video should of obtained way more views. Great build series on this bike. Here to give you a view, like and this comment from California (Bay Area). Thank you for documenting your build of this bike. Respect.
Thank you so much for the support, it really means a lot!
What front fender do you have?
It is the fender for the YZ250 (2-stroke) restyle kit.
Hello Brody, what kind of seat are you using? Looks different than the original 426 seat. Different sub frame? The exhaust, in Belgium I can't get a new exhaust anymore for this type. Also noise restrictions on mx are going up here to 110 db max so I'm going to get in trouble. I've also serviced my front suspension but the just don't work anymore no difference on the settings, do you know which other forks and triple clamps fit on this bike please? Thanks and have a good year. Wouter. My 426 is still my first four stroke from 2002
All the plastics, subframe and seat are from a 2005 yz450f, but it takes some modification I showed in one of the videos. The seat cover and foam are from Guts racing. It is going to be hard to find an exhaust for the bike so maybe try ebay, and look for exhaust for a 03 - 05 yz450f, because there might be more availability and it will pretty much fit. I would get an fmf powercore 4 and get the Q insert to make it quite if it won't pass sound tests. For suspension I would imagine that 03 - 05 yz450f tripple clamps and forks would fit, but the suspension on this bike is still stock.
@brodyfontenot ok thanks for the answer!
Have a nice end of the year!
Faster down hill, 500 two stroke make you shit your pants, luv the video though. 😅
I know, I would like to build a 500 two stroke at some point, but they are so expensive right now.
Fun but slow bike. Don't waste money on four strokes
Will this tensioner work on 2019 250 xc-f?
Check Rocky Mountain Atv, just select your bike, but I think it is the same engine as my bike. www.rockymountainatvmc.com/parts/dirt-tricks-ktm-timing-chain-tensioner-p
Which company and how many cc
Honda, and it's 250cc
Where are you located nice riding trails 👍
I’m in northwestern Nevada, kinda by Lake Tahoe if you know where that is
What is the size of the fork oil seal and dust seal
They are both 47mm, but I'm not sure what the exact part numbers are, but I got them all from Rocky Mountain ATV: www.rockymountainatvmc.com/parts/tusk-fork-and-dust-seal-kit-p?v=3528
Thanks for the info 👍
Sick video dude
What a beautiful place to ride!!!
Hey Brody, I have a 2001 yz426f, should there be oil in the flywheel cover??? or do I have a leaking seal???
Yes, the oil on these bikes runs in the flywheel cover, so this is normal. From my experience, only two strokes will have dry flywheels,
Trop stylé
Whats the exhaust
Fmf gnarly pipe, and stock Honda silencer
Did you do all of your valve shim adjustments before putting the cams back in?
Yeah, I usually do all the adjustments before putting the cam back in, and if you are not sure, it is easier to put the cam in without it being on the chain, to check clearances.
Removing the tensioner. I called Dirt Tricks, they didn't have an answer ? They only said how to install it. From what I can see, it doesn't compress, and doesn't come out.
Did it have a problem when you installed it or ran the bike? Mine worked fine right away and is still working fine.
I thought mine was clean!
Where did you get a fmf from?
I got it from ebay for a 2005 yz450f, but it was hard to find even two years ago, so it will probably be even harder to find now.
You have sockets in both forks?
Yeah, I have the sockets in both forks
Full fmf exhaust pro taper handle bars gonna be nice I can’t wait!
I’m building 2000 yz426 have new weisco piston new jug, head everything ready to be put back together just waiting on a new crankshaft to come in
Nice looking setup BTW. Would of like to seen them on the bike.
Billet and forged are 2 different types of production. Billet is milled from solid block of aluminum. Forged is liquid aluminum poured into A mold. Mold is broken after cooling. Billet is superior and appears to be what you have.
I have an 04 and i recently took the linkage off to clean and regrease but i noticed that the main linkage arm can move side to side while on the frame just asking if this is normal
They can move side to side, a little bit. As long as it moves freely and has no front to back play when you pull on it, it is good.
So dope 🔥🔥🔥 been hunting for a cr25. Came across your channel. 🔥🔥🔥
That thing is out right beautiful
Did you reuse the stock o-ring on the tensioner? I didn’t see it in the video.
Yes, I think in my case the o-ring stayed in the cylinder so that is why it wasn’t in the video
Sell it to me
Nice bike dude
how do you not foul plugs in the technical stuff? cuz i’ll be riding stuff like that constantly clearing it out and still fouling plugs
My best guess is the Lectron carb... Because I have around 150 hrs with 32 to 1 fuel, on this bike and never fouled a plug, I just replace them around 10 to 15 hrs. I'd say you might be running rich. Maybe lean it out and see what happens.
@@brodyfontenot does the lectron adjust to the plug getting gunked up?
It adjusts for temperature, elevation, humidity, etc, but it still has to be the right mixture setting
good vid keep it up
Picking one up Friday found a 2020 with 14 hours on it for a steel so pumped to twist that throttle
The real question is where are you st
What tool did you use to compress the spring
It's a Tusk valve spring compressor from Rocky Mountain ATV: www.rockymountainatvmc.com/parts/tusk-valve-spring-compressor-p
You gay
Give me your instagram so i can send you a video of my bike that make weird noise so you csn tell me if thst is timing chsin
Hey, where did you find the foam and seat cover? I've been looking for a while. I can't find anything for my 426
I got it all from guts racing (www.gutsracing.com/)... but I restyled the bike to 2005 YZ450 plastics and seat, so it is not the stock seat any more.
Crispy as fuck
What a Beauty! Love the Steel Fame YZ's ive got 2000 WR400f but want to find a nice YZ426 next - Definitely the most Brutal of the YZ line up! 👍
sick riding bro! trails look flowy and fun!
Is that the stock tank or an aftermarket tank
Clarke desert tank with custom mounts
Aint rebuild shit. Looks fresh out the dealership
$3900 bike, blown top end. th-cam.com/users/shorts1T1YG4ZAwN4
Nice bike
Nice bike
To start it do I have to keep the valve in?
Use the decompression valve to get it to top dead center, release the valve, and then kick it hard. Repeat this until it starts, and if it won’t start try messing with the carburetor
I kicked it third kick the other day and it started, thanks I would try it again bit the shifter stripped
MAGA 2024!!!
I'm first❤