- 15
- 329 629
V B (vb)
United States
เข้าร่วมเมื่อ 11 ม.ค. 2009
Working with machines had been my passion. In my spare time i continue to explore fixes on the machines that i own and if i am able to figure out something which i believe may be of some use to others too I put it on this channel.
Coolant flush easy way!
For several days i was thinking of a simpler way to flush out old coolant and replace with new coolant in an easy way. Eventually tested it today on my 2010 Kia Sedona and sharing the steps with others who may be interested in trying it too. Overall it was a success except that i had to face some coolant leak which could have been avoided by better connector!
Disclaimer- do at your own risk. Hot coolant shall not be touched. Warnings! Purpose of this video is to share the results of an experiment only.
Disclaimer- do at your own risk. Hot coolant shall not be touched. Warnings! Purpose of this video is to share the results of an experiment only.
มุมมอง: 1 100
วีดีโอ
Toro LX420, Drive Belt replacements
มุมมอง 23K4 ปีที่แล้ว
This video is about how i replace the drive/transmission belt on Toro LX420 Law mower. I am not a professional and just sharing what worked well for me. Anyone following this video shall perform the steps at own risk.
Toro LX420 Deck Belt Replacement
มุมมอง 12K4 ปีที่แล้ว
Detailed steps on how to replace deck belt on Toro LX420 riding lawn mower. I am assuming that current belt is already broken however if that is not the case then step 1 will be to remove the deck belt from Front pulley before starting on the deck disconnect procedure. Disconnecting the belt from front pulley is easy, just loosen up the belt guide by pushing it out of the frame hole and take be...
97 Lexus ES300 - Common Issues and Solutions
มุมมอง 29K7 ปีที่แล้ว
Sharing my experience of owning 97 Lexus ES300 for last 10 years and current mileage (371000 KM). I missed few things in the video 1. Always used premium gas 91Octane or above from day1. 2. Used Seafoam in gas tank once every year. 3. Replaced Headlights in 2008 ($150 price based on my recollection). Purchased on ebay. 4. Purchased additional remote key fobs on ebay $30 5. Water pump was replac...
kia sedona stereo replacement
มุมมอง 25K7 ปีที่แล้ว
Here is a video of how I installed an aftermarket double din radio on my 2010 Kia Sedona. I believe same instructions work for some of the earlier years too though Metra wiring harness could be different for 2006 to 08 models. It did fit perfectly like a brand new factory OEM install and is functioning very well too. Here are links to the products that I used :- www.amazon.com/gp/product/B001JT...
Singer66 (Yr 1913) - restored - Functional demo - Part4
มุมมอง 1168 ปีที่แล้ว
This clipping is only to demonstrate the functioning of Singer 66 (Yr 1913) restored.
Restore a vintage sewing machine - Part3
มุมมอง 4308 ปีที่แล้ว
In this video i am sharing two ideas a) To replace the treadle base table with dust cover and b) To attach electric motor to treadle head. Disclaimer : I am not a professional, just doing these as fun projects and sharing what works best for me. This information may be of use to someone who is working on similar initiative however any work shall be performed at own risk!
2000 Lexus GS300 Fuel Pump replacement
มุมมอง 30K8 ปีที่แล้ว
Disclaimer :- I am not a professional and just sharing what worked well for me. This may be useful information for others who are looking for similar info. Video coverage is not good as my son was handling the camera and missed on keeping a good focus on the activity however I am still posting it as is. Feel free to ask questions. If your Lexus has same issue then do leave a comment irrespectiv...
2000 Lexus GS300 Nakamichi radio replacement
มุมมอง 9K8 ปีที่แล้ว
Here is how i replaced the Nakamichi radio on Year 2000 Lexus GS300. Disclaimer:- I am not a professional and just sharing what worked well for me. This may be of use to someone looking for similar information however any work shall be performed at own risk.
Lexus ES300 amplifier bypass - new radio install - PART 2
มุมมอง 42K8 ปีที่แล้ว
Bypassing amplifier using Metra 70-1761 Radio Wiring Harness solved all the issues related to audio quality. I am not showing the sections that are already covered in part1 (how to remove old radio and wiring color codes etc.). Focus of this part is on bypassing the amplifier. On doing some more research i figured that subwoofer (Green Red/Green black wires) should be connected to Rear Right sp...
Restore Singer Sewing Machine - Part2
มุมมอง 2.1K8 ปีที่แล้ว
Restore Singer Sewing Machine - Part2 Disclaimer:- I am not a professional. I am sharing what worked best for me.
restore singer sewing machine - Part 1
มุมมอง 11K8 ปีที่แล้ว
Disclaimer : - I am not a professional and did this first time. I am sharing what worked well for me. Anyone who tries to follow these instructions shall do it at own risk. Secondly i am not familiar too much with name of the various parts so may have used wrong names like shuttle instead of oscillating hook. Professional will disassemble all parts and clean them properly using Kerosene oil or ...
2004 Lexus es330 radio replacement with aftermarket double din head unit
มุมมอง 80K9 ปีที่แล้ว
2004 Lexus es330 stereo replacement with aftermarket double din head unit. After posting this video, i continued to hear the headunit picking up humming sound (alternator noise), but eventually i found a solution to that issue too. www.amazon.com/Asdomo-Pre-wired-Plastic-Isolator-Suppressor/dp/B01DXEBEB8/ref=sr_1_49?ie=UTF8&qid=1489237922&sr=8-49&keywords=noise filter Disclaimer: I am not a pro...
2005 dodge grand caravan sxt after market radio install/upgrade, gps, backup camera install
มุมมอง 11K9 ปีที่แล้ว
2005 dodge grand caravan stereo replacement, GPS, Rearview Cam, Bluetooth. I installed rearview cam in an easier manner that worked for me however if anyone has a good video of how to remove the back panel bottom part then send me a link. I will like to install camera on license plate directly. Disclaimer: I am not a professional. I am sharing just how I installed it on my car and what worked w...
1997 Lexus es300 stereo replacement with aftermarket double din head unit - Part 1
มุมมอง 51K9 ปีที่แล้ว
Part 1:- Do not install new radio as shown in this part. I captured the video of how I replaced the ES300 stock radio with after-market double din head unit by integrating the external amplifier of Lexus using BHA 8112 wiring harness. Result -BASS low nearly missing, I was able to adjust it a bit in Equalizer option. Sound is more toned, crisp and high on treble side. Cannot compare it to origi...
Turn the key off !
Have you sold your ES300?Any update?
Yes it was sold long time back.
How do you get the display screen lights back on in the 2001 LS 4:30
My friend I need to know if your able to mirror link your phone. Because I purchased the same radio as you and I followed everything you did with the wires, my gps works fine but I can't mirror link it cause it requires Wi-Fi which I can't do if you know please tell me how to do it thank you Please respond to me. Albert
Hi, I sold this car few years back however i do remember that manufacturer of headunit was responsive to questions. You can probably email to them your issue.
Great turotial. Do you have a 2015 Kia Sedona Carplay installation video?
Sonething no one is saying in any videos on this tractor is, the transmission belt pulley has 3-10mm shèet metal screws just above the rear axel. Just loosen them enough and it will pivot away from the main belt guide which makes the PTO belt easy to put on the rear pulley. Once its on the lower pulley half, you can tighten the 3 - 10mm screws back down. Then reattatch the top smaller belt. I had to heat the PTO pulley bolt cherry red with a.MAP gas torch to get it out. Took about 15 minutes of constant heat, then the impact. By the way its a fine thread right handed bolt. Left loose, righty tighty.
to remove the body pan= there is a nut under each foot pan, have to unbolt peddles, unbolt seat, pull off rear lever handles, and feel around-there are two small bolts hidden under the big sticker on middle of pan floor (in front of seat on floor), then body pan will lift off!
Thanks for sharing this detail.
Another quick tip. I paused the video and did a screenshot of the belt numbers from the package. Makes cross referencing them easier.
Thank you for your effort.
Quick tip. Get a shop vac or compressor to get rid of the grass it the pulley area. Will be easier to find bolts if you lose them.
You're a good teacher! I put those belt numbers on my Amazon wish list and was wondering how well they held up for you after 3 years of use.
Thanks for your response. It is all working very well until now. I already have used couple of times this season too.
i did the same thing in my 02 es300, but now the subwoofer knob doesnt work. do you know what that could be?
I have a LX460 with the same belt set up . Thank you for the video. It will be a great help to me.
Glad it helped
Am not geting no sound any help bro thanks
You must have received an instruction paper with toyo harness. Check again which wire is for amp connection, typically blue with white stripes but can be different too like black with white stripe. Ensure you are connecting it to head unit’s amp turn on wire which is usually blue with white stripe.
I bought the same kit for my 2006 Lexus ES330. The kit actually states that the "blue" wire must be connected to the factory amp. BUT where is the "blue wire"?
Is there a black wire with white stripe?
Just hooked this radio up but I have no sound
@@exoticbullyssouthtexas3963 Amplifier is not turning on.
Do you know why my radio is muted? It has its original stereo on there. It was playing music but it stopped
I just replaced both belts on my lx420 yesterday with help from your video. Thanks for showing the bolt that separates the belt as mine was missing and I wouldn't have known there was supposed to be one. Thanks for the help
I am glad that you found the video helpful. Do replace PTO cable too if you see that deck blades loose speed at lower height.
What is the length of the belt
Get the number of the belts he posted in the beginning. You can do an internet search to cross-reference belts and or get the lengths.
Drive belt or long belt is 5/8” by 90 1/2”
Thank you so much for this video! My first time doing anything sound and radio related, I can dismantle a car, I can wrap a car but I was super intimidated to try on my ES330 w/ a navigation unit. But your video made it so simple to do, I thought it was so much harder!
I’m glad you found it useful.
Does the ground loops help out with the alternator whining noise ?
Do I need to by two ground loop ?
was sold a "fully serviced" Toro lx 500. Well it bogs to the point it wont move, has a whining sound & then the gas peddle goes limp with no spring back. . I could smell belt , or something of a similar at one time as well. Any advice would be greatly appreciated.
It is really difficult to recommend anything however assuming engine and transmission are running issue can be on belts. Deck belt routing around brakes is one area where most mistakes happen. I have uploaded a video on deck belt and one on transmission belt replacement. Watch both carefully and see if both belts are properly fitted on your mower.
@@VijayBhalla @V B I'm looking into the pulley, and deck belt & this has two belts I'm assuming the other is a tranny belt. I'm going to replace all . Been informed by most that that is the issue. hey! Thank you ! .
Hola mis saludos le cambie el radio por una pantalla a mi auto pero le entra el ruido del motor por las bosina como lo puedo solucionar gracias
Hola mis saludos le cambie el radio por una pantalla a mi auto pero le entra el ruido del motor por las bosina como lo puedo solucionar gracias
This was a good video and helped a lot. I have a LX426 so there are some differences but nothing too drastic. Where your belts slipped into place easily mine required removing the pully for the upper belt. Thanks for the help!
Glad to hear that. Also I recommend changing PTO cable if you find that mower looses cutting power and runs slower when height adjustment is lowered to position 1 or 2 and works with full power at higher settings. PTO cable visually looks good but is the culprit for this issue.
btw, to remove the fender, there are screws under the rubber slip pads and two under the decal.
Thanks
Thanks! BTW the fuse behind the fuel tank was blown on mine too and the replacement blew out soon. I found some wet grass in that connector to the head lights causing a short.
Thanks for sharing!
Hi I have 2004 Lexus Es330 with radio cd no navegation system I need a Wiring Harness Adapter can you tell me which one should i buy? thank you
If you’re planning to replace headunit then you can use same wiring harness as shown on my video and mentioned in detail description however ensure that your existing radio is not different. Secondly install noise filter too. I personally feel it is better to leave factory radio as is and use phone for navigation.
Hello there... I know it's been along time you made this VDO. But I need some help. I am trying to install Apple Carplay head unit on my 2005 Lexus ES330. Where did you hook up the Amp remote wire (Blue/White) from TYTO-01 harness to...It looks like you connected to the orange wire(marked AMP) but my TYTO-01 does not have that wire. There's an orange wire but it's for the brake. I also was unable to find the remote wire color code to turn the factory amp on the net. I will have to Ohm all the wires from factory harness if no help. Thanks.
Don’t go by color of wire. Look for details on supporting documentation or label on the wire itself. Sometimes wire label is amp, sometimes remote.
@@VijayBhalla Thanks. Right now I got no sound because the factory Amp is not turning on. I got to have to trace the remote wire from the main connector harness and connect it to Blue/white from my TYTO-01 harness. Can’t find on the net what wire 😬
May sound like a silly question but does the subwoofer not perform worse being fed from the Pioneer rather than the stock amp? Also, if I were to get a more "power hungry" subwoofer and wanted to install an amp for it, how might I go about that?
I install a 7 inch touch screen radio and now when I turn my headlights on the climate control back light won’t come on then when I turn my headlights off the backlight on the climate control comes on all my dash lights and other lights work normally just the climate control having a problem with please help
Disconnect illumination, orange color wire and check if issue gets resolved or not.
Ok thanks
Great video thanks so much!
For benefit of viewers I want to share that for over a year i was facing low speed of spindles, blades at lower height of deck. Replacing PTO cable and adding greese to spindles resolved the issue. Root cause was PTO cable.
For benefits of viewers I want to share that i was facing issue of spindles, blades running slower at lower height of deck . Finally issue got resolved on replacing PTO cable and adding greese to spindles. PTO cable was the root cause.
Singer not broken buddy just seized a lil check the patina on my 1916😁
.
I picked a 1997 ES300 with 105 k original miles on it last year. What's funny is I owe the exact same car in 2002 2003. Early the same car same color same interior color everything. But I also noticed it has the same problem. When I go over bumps I get a clunking coming from the top of the upper shock mount. I made the mistake in the past of replacing all unnecessary items that didn't fix the issue. When you pop the hood and look to the side of the engine closest to the windshield on each end you have those rubber absorbers with the bolt showing that's where the noise is coming from what should I replace in order to stop these clunking sounds? He goes over this in the beginning of the video it's only happening on my driver side I tried to lubricate it but it doesn't seem to be working on the noise
I recommend that in addition inspect bottom of the car carefully. Remove any rusted broken loose shields. Specially close to exhaust and fuel tank.
Great video thanks
Glad you found it useful.
Im suprised the battery didn’t die lol
Recently i did a deep cleaning of carpet of my 2011 lexus es350 by removing both front seats from car. Since carpet became quite wet i had to keep car doors open for about 3 days and nights with external fan on. All this while battery was fully connected. Battery dies after about 3 days completely. I waited for about 2 more days and charged battery while still fully connected in the car through an external charger. Charged overnight and by next days everything was fully functional. So per my observations it takes about 3 days for battery to die with all internal lights on and door left open. Can be different depending on health of battery too.
was there a radio code you needed to input to get audio??
No there’s is no radio code.
@@VijayBhalla the guy who installed mine said I needed it to get audio. I have power to the radio but no audio in my aftermarket stereo... could it be this issue? th-cam.com/play/LL.html&ab_channel=Buck2013 I had audio before he installed it
@@VijayBhalla have you had this happen?
Hot coolant return line is present at top corner of any vehicle therefore accessing and disconnecting it very easy. Procedure shown can be done in much better way if a spare hose about 4 ft in length and diameter same as coolant hose is purchased beforehand. I was using just what was available to me in order to test theory but I really liked the result. Will repeat same for other cars in future.
Not sure if u still monitor this, but thanks! Lol. I just did this same thing today! Now my MIC works and I don’t hear the whine during acceleration from Using the old wiring kit using the stock amp!
Glad that you found this video helpful.
it is the finest mass production car ever made. one thing i did with mine that made it look way cooler is use a 195 tire in front with the 205 in back, it fits the line of the car just right. fyi, i'd change that front valve cover gasket, likely your biggest leak as it's bumped up to timing chain housing. takes about 15 minutes, any person that knows how to use a ratchet can do the job. the finest car ever made from 1997 would be a $70,000 car if built equally well today. paid 2500 with 167k owned 5 years 188k now. no problems but front valve cover leak, nails and screws in tires i plug. i would drive this car to alaska with no worries. fast, quiet, smooth, perfect hiway car.
very bad quality video
how much it would cost to fix ac and power windows? someone have one for sale for about $1900 usd. mileage about 100000.
Hello,I have a 2003 Lexus ES300 which Installation Kit do I need, the only with the (70-8113 Harness) or the kit with the (71-8113 Harness)
I cannot say anything about 2003 ES300. If your radio looks same as mine then most probably the kit specifications will be same as what I used. This is absolutely a guess at my end. You shall explore more through TH-cam and other websites.
What did you do about the parking break wire??
Attached that wire to break bypass module.
Thanks for sharing the video. I have a 2003 lexus es300 and I want to install a new stereo. I need your help. Doubts: What is the function of the TYTO-01 module; quick installation? or allow operation of the factory amplifier? How did you install the stereo to the factory amplifier? Is there a cable in the stereo connector that can activate the amplifier? Thanks
TYTO-01 allows operation of factory amplifier. It was a bad decision at my end to choose a cheap Chinese unit initially, later on replaced with pioneer head unit and few other fixes that made the installation perfect. Please do read my comments about issues and resolution post installation before planning your installation.
@@VijayBhalla OK, THANKS FOR YOUR VERY VALUABLE ANSWER.
Thank you for sorting out and showing the pinouts!! Spent the weekend with my son installing a stereo and sub in his car and this saved us so much time and aggravation. Really appreciate you taking the time to share.
Glad to hear that!
Very helpful video. Thanks. The main engine pulley guard tip is great.
Glad to hear that you found this video helpful.