- 141
- 708 391
DIY Simple Circuits
Ukraine
เข้าร่วมเมื่อ 26 ก.ค. 2022
This is a channel about simple electronic projects for beginners such as building electronic kits, freeform circuits, breadboard projects, Arduino projects, etc.
I will upload one or two video per week.
Please subscribe if you like it.
Warning: Have fun but always remember to be safe. Anything you try is at your own risk. Thank you!
I will upload one or two video per week.
Please subscribe if you like it.
Warning: Have fun but always remember to be safe. Anything you try is at your own risk. Thank you!
5 Easy-Build FM Radio Kits for Beginners
Ever wanted to build your own FM radio? It's easier than you think! This video shows 5 FM radio kits perfect for beginners.
So grab your soldering iron and get ready to unleash your inner radio geek!
Don't forget to like and subscribe for more fun electronics projects!
00:00 FM Radio №1
03:33 FM Radio №2
07:40 FM Radio №3
16:03 FM Radio №4
28:04 FM Radio №5
#icstation
#fm_radio
#diy_radio
#diy_fm_radio
#diycrafts
So grab your soldering iron and get ready to unleash your inner radio geek!
Don't forget to like and subscribe for more fun electronics projects!
00:00 FM Radio №1
03:33 FM Radio №2
07:40 FM Radio №3
16:03 FM Radio №4
28:04 FM Radio №5
#icstation
#fm_radio
#diy_radio
#diy_fm_radio
#diycrafts
มุมมอง: 10 825
วีดีโอ
Building an 8 bit computer | ZX Spectrum clone
มุมมอง 1.8K4 หลายเดือนก่อน
Assembly and testing of an 8-bit computer, clone of the ZX Spectrum - "Harlequin 48k" DIY Kit.
DIY Hybrid tube amplifier
มุมมอง 3.4K5 หลายเดือนก่อน
Assembling and testing an electronic ICStation DIY kit "Hybrid tube amplifier". This video shows how to make a Hybrid tube amplifier at home using an electronic kit. The circuit use IC LM1875T and tube 6J1. Check out other DIY amp kits: th-cam.com/video/ezRdFSX0uzM/w-d-xo.html th-cam.com/video/FcP-BY7jbvA/w-d-xo.html #icstation #amplifier
DIY Smoke detector
มุมมอง 4246 หลายเดือนก่อน
Building and testing electronic DIY kit "Smoke detector". This video shows how to make a Smoke detector using an electronic DIY kit.
FM Radio Kit: Crafting a mini FM radio
มุมมอง 2.1K6 หลายเดือนก่อน
FM Radio Kit: Crafting a mini FM radio
XR2206 Function Generator | DIY Kit Assembly and Test
มุมมอง 1.1K6 หลายเดือนก่อน
XR2206 Function Generator | DIY Kit Assembly and Test
Building a frequency meter | Electronic kit
มุมมอง 4816 หลายเดือนก่อน
Building a frequency meter | Electronic kit
Running Light | Electronic Kit Building
มุมมอง 1.8K7 หลายเดือนก่อน
Running Light | Electronic Kit Building
How to use SMD in breadboard projects
มุมมอง 4528 หลายเดือนก่อน
How to use SMD in breadboard projects
Building a stereo audio amplifier | TDA2030
มุมมอง 1.1K9 หลายเดือนก่อน
Building a stereo audio amplifier | TDA2030
NE555 delay timer relay switch module | DIY kit assembly and testing
มุมมอง 1.3K10 หลายเดือนก่อน
NE555 delay timer relay switch module | DIY kit assembly and testing
Wheel of Fortune | DIY Kit building and testing
มุมมอง 1.3K10 หลายเดือนก่อน
Wheel of Fortune | DIY Kit building and testing
Colorful voice controlled LEDs | DIY Kit
มุมมอง 3.3K11 หลายเดือนก่อน
Colorful voice controlled LEDs | DIY Kit
DIY AM/FM Radio Kit: Crafting Radio Receiver
มุมมอง 55K11 หลายเดือนก่อน
DIY AM/FM Radio Kit: Crafting Radio Receiver
DIY automatic night lighting | how to make automatic night lighting
มุมมอง 86211 หลายเดือนก่อน
DIY automatic night lighting | how to make automatic night lighting
Building an FM radio | how to make FM radio from a kit
มุมมอง 8Kปีที่แล้ว
Building an FM radio | how to make FM radio from a kit
How to make FM radio receiver | Building an Electronic DIY Kit
มุมมอง 15Kปีที่แล้ว
How to make FM radio receiver | Building an Electronic DIY Kit
simple packet radio AM. FM but beautiful.
Hässliches Gehäuse.
Bro we need this how much it cost
Please see on AliExpress www.aliexpress.com/item/1005007709719743.html
simple and pretty
Please reply me please I have a question for you 😢
Please reply me please I have a question for you 😢
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please reply me please I have a question for you
Please respond me I a question for you 😢
Does you made it? Plz answer this I have another question for you😢
Yes, I made it. You can see the process in the full video th-cam.com/video/gLwT5FtFdcE/w-d-xo.html
Great job 👍
Thanks 👍
Hi, i trying to learn electronics and i kinda dont understand the diagram is there any chance you could upload tutorial how to make this heart without pcb or uploud different diagram? Thanks
This is just a video on how to build an electronic kit where all the parts are sold together. If you are trying to learn electronics, you should start with simpler circuits like flip flop circuit.
@@DIY_Simple_Circuits gg
@@DIY_Simple_Circuits thanks anyway:(
@@DIY_Simple_Circuits do you have any other suggestions im trying to make this for my girlfriends and ye if you dont have schematic for it what else can i do but with same LED effect
@@mrsummsonyt You can buy and assemble a DIY LED heart kit. See here for example www.aliexpress.com/w/wholesale-led-heart-diy-kit.html
Wheres that Flux? Even if the liquid solder has it pre mixed in I think most people would dab abit for flow & if I'm not mistaken it helps protect components and chips from excessive heat if a chil takes longer to remove (even tho ur flow is, "🤌" ) 😅✅
But this is soldering paste and flux is not needed. The flux inside the solder paste helps clean the metal surfaces and promotes good solder flow during the reflow process.
Tuyệt vời 🎉🎉
can you five me the circuit diadram please
Please see in the full video: th-cam.com/video/GYvG8suICTI/w-d-xo.html
Merci pour le tuto mais tu peux détailler les valeurs de résistance par exemple R1 10k ainsi de suite
Toutes les valeurs sont indiquées dans le schéma 6:55.
Plan please
Could you please clarify what you mean?
@@DIY_Simple_Circuits the schema
Please see in the full video at 6:58 th-cam.com/video/gLwT5FtFdcE/w-d-xo.html
How are you getting the clicking sound?
There is a buzzer that makes this sound.
@DIY_Simple_Circuits it's a piezo buzzer but instead of it being fixed tone, it's one thst relies on the source of power to have a frequency
Tem o link pra fazer pedido
www.icstation.com/rda5807-radio-receiver-87mhz-108mhz-p-15859.html
Вітаю. Дякую за наглядне відео! Я якраз закінчив збирати це виріб, як його краще підключити до батарейки? Я не зовсім зрозумів цей момент і в інструкції не вказано. Просто дротики припаяти і накинути їх на відповідні полюси батарейки 9 вольт?
Вітаю. Так, все вірно, просто припаяти дроти і підключити їх до відповідних полюсів джерела живлення.
How to get all the components from Nigeria?
I don't know. Maybe AliExpress.
Superb video.
Well done job. Bravo!!!
❤❤❤ i only cant understood,where you connect the ferit antenna.....?
What a radio...one single transistor within😂😂😂
At 5:34 you can see where the coil is connected.
How can I find the circuit ?
The circuit in the video at 00:42.
is this 12v circuit right ? it can handle car's battery ?
Power supply 4-16V. Yes, it can be powered by a car battery.
Can you explain how this works
Could you clarify what exactly needs to be explained?
The path the electricity takes and why the lights are blinking
This is a classic astable multivibrator circuit that was explained many times in many places. For example, you can read how it works here en.wikipedia.org/wiki/Multivibrator
Your case fits like a glove. Mine not even close on the tuning capacitor side.
These sets vary in quality, from not bad to very poor.
Thanks for the video. Did you have to adjust the tuning capacitor for receiving the full bands?
Yes, the tuning capacitor was adjusted by the regulators on the other side.
@@DIY_Simple_Circuits Thank you very much. If you have time can you say which screws adjustment is for AM and then the other two must be FM. There are four screws.
As I remember, after soldering, only two screws are available for adjustment. The one at top is for AM.
@@DIY_Simple_Circuits Oh on mine there are 4 adjustable screws. I guess I will do some tweaking to see what I can get. Right now one FM station out of 10 available and no AM out of 4 available. Thanks again for all your videos.
My God, how does your solder melt so fast
Excelente vídeo - muito bem filmado! Ajudou-me muito a montar o rádio 📻 kit. ❤
Estou feliz por ter gostado.
Radio no. 5 looks like those "Palito" radios seen in Nigerian nostalgia posts
Yes, it is something similar.
Troppo rumore le inguaribile.
Sì, c'è del rumore extra in queste radio.
What is power supply?
DC 4.5V. According to the circuit, it can be 2.5 - 14.5 V.
Another useless music video! 😡 🤬
Why?
Tapi saya sudsh like & subscribe.. Thank's
Purchase links: FM Radio №1 www.aliexpress.com/item/1005004005620669.html FM Radio №2 www.icstation.com/rda5807-radio-receiver-87mhz-108mhz-p-15859.html FM Radio №3 www.icstation.com/radio-module-108mhz-wireless-receiver-chargeable-gs1299-radio-p-16015.html FM Radio №4 www.icstation.com/radio-210sp-radio-soldering-assembly-kits-p-15937.html FM Radio №5 www.icstation.com/receiver-frequency-modulation-micro-radio-kits-electronic-assembling-project-p-9653.html
Gak seru
Sayang sekali Anda tidak menyukainya.
Setiap kit bisa di jelaskan,trus detai pembelian nya juga di jelaskan.. Ini malah musik yg di dengar.
Ini hanya video proses perakitan tanpa penjelasan. Menambahkan tautan untuk membeli di komentar pertama.
Kenapa musik nya kencang? Padahal saya ingin setiap kit radio bisa di jelaskan.
Level musik latar tampaknya sama sepanjang video.
Great video, thanks for including the schematics 🙂
Glad you like it!
Está desafinado
🤷♂️
How could I get one of those boards with leds with that form ?
www.icstation.com/green-electronic-hourglass-shaped-flashing-light-funny-electronic-kits-p-13070.html or www.aliexpress.com/item/1005003434338918.html
i want to install this in toy, is it possible to do it without the board?
You can solder this circuit without a breadboard.
@@DIY_Simple_Circuits thank you. I have zero knowledge in electrical stuff. Just found another vid that helps me.