- 63
- 12 592
SouthernKnifeLife
United States
เข้าร่วมเมื่อ 22 ต.ค. 2013
I'm an old school guy that was raised in the south, respect & honesty was and is a huge part of my life that I live by as well as treating others the way you want to be treated. Don't treat folks like shit cause I very seriously doubt you want to be treated like a piece of shit. Wanted to start this journey for awhile and just decided ain't nothing to it but to do it. If it is to be it's up to me. This is new to me with no fancy equipment and nothing to hold the camera. I would appreciate your guys support and invite you to grow with me on this journey as I grow and the videos get better. Later on I will show My face and give insight into my life. I've decided on Southernknifelife for channel since I'm from the south and knives, sharpening and the hobby surrounding that are and have been a huge part of my life and hobby for years now but don't want to limit the channel to just that yet. Thanks 🙏 for any and all support given.
this is a carrot slip made by @ericasedc.
this is a carrot slip made by Erica, it's a well made and put together slip. the leather is thin so it contours to your knife. this is not the last one I will be getting from her. the stitching is tight and should last.
มุมมอง: 13
วีดีโอ
another Slater from @ericasedc and Dusty @DustySerpa-Duckhead_Forge
มุมมอง 2114 ชั่วโมงที่ผ่านมา
another Slater in k390, this one has crosscut macarta with natural liners and orange and blue pins and stripes. I love these EDC blades
ceramic rod from @Chefknivestogo
มุมมอง 7วันที่ผ่านมา
this is a chef knives to go black ceramic rod, I have had it for years and it's definitely worth having if you are looking for one but undecided what to get
Rosecraft Loosahatchie jack doing it up right @choirboyzcutleryoutdoors @RoseCraftBlades
มุมมอง 5814 วันที่ผ่านมา
this Rosecraft loosahatchie jack cut up all this and still slices paper and I didn't go easy on it. can't wait to get a better phone so I can show all this in real time
beautiful slater from @DustySerpa-Duckhead_Forge and Erica @ericasedc
มุมมอง 7428 วันที่ผ่านมา
this is the Slater that Erica and Dusty at Duck head forge designed. it's in k390 at 64.5. I have used it a little on cardboard, I love the ergos and it's a slicer. I thought the edge retention would be a little better but we will get another edge and see. the fit and finish is about the best you can get. I love the macarta and the setup that Dusty came up with, I will be getting another one of...
@RoseCraftBlades Loosahatchie jack in red sandalwood from @c.risnercutlery
มุมมอง 113หลายเดือนก่อน
this is my favorite Rosecraft design, the Loosahatchie jack, then they went and did it in wood, 👏 yes sir
Lishen knives drop point EDC @dlttrading #edccommunity
มุมมอง 99หลายเดือนก่อน
this is Christian's drop point EDC model in AEBL with some beautiful desert ironwood and blue liners, this thing is beautiful
PBK pocket essential holding it's own @Primitivebearknives
มุมมอง 10หลายเดือนก่อน
PBK pocket essential holding it's own @Primitivebearknives
freehand sharpening is a passion of mine
มุมมอง 132 หลายเดือนก่อน
freehand sharpening is a passion of mine
two primitive bear knives and a little mother's day thoughts @Primitivebearknives
มุมมอง 482 หลายเดือนก่อน
two primitive bear knives and a little mother's day thoughts @Primitivebearknives
a few tiners for Tuesday, @richterknives @LastChanceKnives
มุมมอง 132 หลายเดือนก่อน
a few tiners for Tuesday, @richterknives @LastChanceKnives
freehand sharpening a toothy edge on a edc blade
มุมมอง 213 หลายเดือนก่อน
freehand sharpening a toothy edge on a edc blade
This is a 10v splinter from Kyle aka@TheScrawnyLumberjack
มุมมอง 373 หลายเดือนก่อน
This is a 10v splinter from Kyle aka@TheScrawnyLumberjack
Primitive bear knives Edisto@Primitivebearknives
มุมมอง 1444 หลายเดือนก่อน
Primitive bear knives Edisto@Primitivebearknives
are illegals (migrants) asking for money in the south?
มุมมอง 55 หลายเดือนก่อน
are illegals (migrants) asking for money in the south?
LT Wright frontier valley natty with A2 tool steel and kydex @LTWrightKnives
มุมมอง 865 หลายเดือนก่อน
LT Wright frontier valley natty with A2 tool steel and kydex @LTWrightKnives
Battle Horse knives bronco 2 in natty with blue liners with cpm 154 @battlehorseknives1295
มุมมอง 1635 หลายเดือนก่อน
Battle Horse knives bronco 2 in natty with blue liners with cpm 154 @battlehorseknives1295
when you're good you're good but being good and knowing it, priceless 😊@JackWolfKnives
มุมมอง 467 หลายเดือนก่อน
when you're good you're good but being good and knowing it, priceless 😊@JackWolfKnives
my local slip joint honey hole, @GEC, @Northfield, @Caseknives
มุมมอง 159 หลายเดือนก่อน
my local slip joint honey hole, @GEC, @Northfield, @Caseknives
clip point Ohio River jack and big thanks to Ken @LastChanceKnives @c.risnercutlery#edc #edcknife
มุมมอง 839 หลายเดือนก่อน
clip point Ohio River jack and big thanks to Ken @LastChanceKnives @c.risnercutlery#edc #edcknife
two most carried, Ohio River jack @c.risnercutlery and big bro Jack@JackWolfKnives. love em 👊
มุมมอง 199 หลายเดือนก่อน
two most carried, Ohio River jack @c.risnercutlery and big bro Jack@JackWolfKnives. love em 👊
winning and grinning, Love this @richterknives slip
มุมมอง 209 หลายเดือนก่อน
winning and grinning, Love this @richterknives slip
Bradford guardian 3 and@ DLT Trading engraving service take 3 or 4 🤣 sorry about the wind 🌬️
มุมมอง 1252 ปีที่แล้ว
Bradford guardian 3 and@ DLT Trading engraving service take 3 or 4 🤣 sorry about the wind 🌬️
Bradford guardian 3 and DLT Trading engraving service part 2
มุมมอง 652 ปีที่แล้ว
Bradford guardian 3 and DLT Trading engraving service part 2
just an early morning summer storm in the south
มุมมอง 122 ปีที่แล้ว
just an early morning summer storm in the south
Very cool!
@@RandysWSG thank you sir, it is a neat slip for sure
Very nice looking slip. I love the orange color. Thanks for showing it to us.
@@RadioGeekBlades thanks for the support, it means a lot to me 🙏
@@SouthernKnifeLife no problem. You have a great channel, keep it up!
Also I’m not crying at all the kindness… 🥹😭🥰Thank you man. I appreciate you!!!!
@@ericasedc 🥰 now I gotta get square with you and get a crazy horse.
@@SouthernKnifeLife you really do, it’s so beautiful!
So happy it got there!!!!! 🎉❤
Peace be with you ❤❤❤
@@peterfreidel7721 thank you so much 🙏 and you as well
Sweet looking knives
@@jeffjackson5331 thank you, I am lucky to be able to have these, I appreciate your support
@@SouthernKnifeLife you are very welcome. Yep!
Thank you for the endless support brother. We appreciate you!!!!❤🎉
@@ericasedc your welcome, I know it's getting old but these speak to me, there's nothing I don't like about this design
Cool knives! God bless you, and your family! ❤❤❤
@@peterfreidel7721 thank you so much and God bless you and your family as well 🙏
Rosecrafts do come very sharp. And there D2 is fantastic!
@@BaxtersBlades they really are, kinda wish folks could move past the C word and just try one but everyone has their opinion and a right to not buy I guess
Great knife ,
@@timmyhamby7715 thank you 🙏 and for the price just about anyone can attain one
Very nice! You have a good weekend
@@jeffjackson5331 thanks and you as well
@@SouthernKnifeLife you’re welcome! Will do!
I've been very impressed with them so far man.. the truth is for day-to-day for most people with what they cut.. these knives get it done
@@choirboyzcutleryoutdoors yes sir they do and I didn't go easy on it either and the blade ain't wobbly and about to fall out either
Sweet
@@jeffjackson5331 thanks, if you're into slipjoints you gotta try a Rosecraft, the fit and finish is pretty much on point
@@SouthernKnifeLife you are very welcome. I have RCB’s Surgeon’s knife and it is a slicing machine. You folks have a wonderful day my friend. God Bless! 🙏🏻🙏🏻
Heck of a knife
@@RandysWSG yes sir for sure, can't wait to upgrade my recording device to show all this stuff as it happens.
I have been impressed with Rosecrafts traditional knives. They do a great job with D2. I don't feel like I am carrying a steel that is not in the "super steel" class. The Briarpatch Jack is my favorite model so far.
@@LastChanceKnives I like the blades on the briarpatch that one you have is a beautiful piece
I've been extremely happy with my RCB knives, with the Appalachian Jack and Nolichucky Jack my fav duo of the lot.
@@byronkennedy7912 I have a Nolichucky but moving it along, it's a very beautiful knife and I like it but the Loosahatchie jack has my heart so I haven't really used the Nolichucky. I wish they would make the Loosahatchie a tad bigger kinda like the gec 2 ab Barlow. That would be noice
Wow it’s razor sharp huh beautiful knife super sharp knife. I like your background is that witches something you painted yourself? Congratulations on your purchase. God bless you and your family
@@watchcityknives God bless you and yours also and thanks for the support. Our daughter actually made that. It was a Halloween thing she made that's on a canvas
@@SouthernKnifeLife Please tell her to stay passionate about the things she enjoys even when others may criticize her. STAY STRONG AND PLAY TELL HER SHE IS SUPER TALENTED AND ALWAYS STAND UPFOR WHAT SHE BELIEVES IN ! My Mom is 84 daughter Kelly is 34 my granddaughter Ashley is 11 and my little angel Coco my 13 year old emotional support chihuahua dog those 4 women are what I live for. #RESPECTWOMEN
@@watchcityknives yep I'm the only guy in the house lol. Even our little dog is a lady. And what you said are my beliefs as well, I'm oldschool so I don't care what anyone else thinks but my wife and daughter are a little softer than I am but our daughter is becoming more and more like me everyday and that has me worried 🤣
New subscriber. A Buck, Victorinox, Rough Rider kind of guy. That is one beautiful fixed blade knife. Such a work of art. I'd almost be afraid to use it and scratch it up. Thanks for showcasing. Looking forward to checking out your future content.
@@DavidBurge-xf8zx thanks for your support, I used to be that way but I've gotten to the point where I do use all my knives lol.
Howdy ... first, thanks for the share of this awesome lil' fixie by Dusty over at Duckhead_Forge. I don't own any of his knives (or any from the Fiddleback Forge group), but would luv to get some in hand to try ... maybe someday. Big Kudos to Dusty and Erica for collaborating on this design and sending it to you to checkout. I also have to thank Last Chance Knives Ken for sending me over to checkout your content.
@@byronkennedy7912 thanks for the support and ken is a great guy. They really didn't send it for me to check out, I reached out and had it made with the macarta liners and all I wanted and paid for it but yeah definitely talented those two
Last Chance Knives sent me over here. Beautiful fixed blade knife & sheath! Thank you.
@@larryvincent1083 thank you 🙏
This beautiful fixed blade would be great for some outdoorsrmen men's meetings I go to once a month.
@@kellyoneal1675 it's a very nice edc design, I'm sure it can do some outdoor stuff but it is a small knife but it is beautiful. Thanks for your support
Nice knife i prefer bone handles carbon steel has always been my go to steel for knives of all kinds. People complain because they rust . In my opinion if you cant rub a little oil on your knife you dont need one.
@@michealbarnett3065 see I have lived right across the road from the ocean at one point and had o1 A2 tool steel knives and never had a rust issue, and still live in the humid south and still have never had anything rust, maybe I'm just lucky or maybe folks are just being a little paranoid about it. I do know that the finer finish that's on the blade the less likely it is too rust. I love when you use your knife and cut meat and food up and it starts to get that purty rainbow color.
Very nice little fixed blade. I like the handle color with the blue inner liners. Thanks for show it to us. 👍
@@RadioGeekBlades your welcome and thanks for the support
Looks great in the light!! love that blade!
@@BaxtersBlades it does look better in the light, I'm in the south and 111 index today so sometimes it's in the house but love making them outside with natural light. It's a great edc design, got me a isp sheath and enjoy carrying it a lot more now
Very cool fixed blade! Looks nice and like the colors. Very nice background also! Oh Ken sent me over here!!😁
@@BaxtersBlades lol yeah Ken is awesome, I was wandering what was happening 🤣then I saw his video, thanks for the support
Great looking knife!
I love the design. I wana call it a barlow. C Risener is a great company. Do you have any Sheffield knives?
@@RandysWSG yeah I have a Nolichucky but man my favorite is this loosahatchie jack has my heart. I don't have any Sheffield knives yet but I have wanted one for awhile, Taylor's eye witness, Arthur Wright, and Michael May, I have wanted some of those, and saw a few videos of those twisted assisted Barlows with macarta and burlap, man they are nice. One of those videos might have been yours
@@SouthernKnifeLife Check out James and company on all about pocket knives. That have a nice selection. The TA barlows are fantastic, definitely grab one of it can. I have the clip.
@@RandysWSG yeah I know about James and Company, I'm in the loop brother lol. I'm broke right now but when I look at them I want to get the cheaper A.Wright but man those ones with the snake wood and all are very beautiful
That's a really beautiful knife! I am liking the blue liners a low. Coming over from Kens. That background is killer!
@@RandysWSG ken is a very good man, thanks for the support. My daughter actually did that and painted it, she is a great artist but it's personal to her she doesn't show many people. Natural macarta and blue liners are what I love
@@SouthernKnifeLife Your daughter does awesome work!!!
@@RandysWSG thank you
Ken sent me over to check out your channel! That looks like it would make a nice EDC! God bless you and your family!❤❤❤
@@peterfreidel7721 ken is great God bless you and yours also. It's a very nice edc design
That looks like a handy skinner. I like the blue spacers
@@jasonbeecher509 it's a great edc for sure and it is a slicer for sure
Last chance knives sending us over bud, you seem like a very nice down home boy, I love the way you talk lol. Booger and bugger lol. Reminds me of my Arkansas kin. I can’t wait to check out your other videos. Very beautiful knife too. Looks nice and slicey and perfect for a front pocket.
@@beeferbaron 🤣man my wife says that about my accent, I think the older I get the more it thickens, I can't lie though I am country, I've been called a good Ole boy but don't know if it was meant as a good thing or bad. Thanks for the support oh yeah funny you say that cause I did get a pocket sheath for it lol
Looks like that blade steel did very well. I'd like to try some of that out myself. ATB, Dingo
@@peppereddingo9339 yes that knife actually did do very well, I like cruwear, it takes that toothy edge and bites in and cuts were some steel wants to slide over stuff. Hopefully you can try it out
Hey there! Ken (LCK) suggested your channel. Thought I'd check it out. I really like that blade shape. Looks very useful. Definitely a slicer. That handle is very uniquely shaped. Love the micarta. Going to check out some of your other videos. New Sub. Have a great week! ATB, Dingo
@@peppereddingo9339 ken is an amazing fella, thanks for the support, when I started I had like one subscriber then 5 and was amazed at that lol. I hope to bring better videos to the table soon. Have a great week also
Wow. That is a nice edc fixed blade. I like the blue touches and that blade looks awesome. I bought a Spyderco delica with k390 after watching Erica’s review on it. I bet that steel will hold up great.
@@deanP. I haven't really put it through it's paces yet but It's an amazing edc design and a slicer, I like the sticky edge that it gets. I need to get me a Spyderco in some of those steels, I'm drawn to the mule teams for some reason
Last chance knives sent me over. That slater looks like it woukd be a great deer processor. That droppoint blade is great for processing.
@@shoresharp8349 it would be, it has a nice thin edge and is sticky sharp, ken is an amazing guy I can't believe he did that but it's much appreciated
Hey man, Ken sent me over. Looking forward to your review after you carry that beauty a while. Really interesting design all around but especially that handle. Very unusual. Keep crankin em out buddy, the videos will get easier as you go.
@@martinparmer yeah I've figured that out man my first ones I was very nervous, now I'm more relaxed but gotta get a better phone, this one has no memory if I go over 4 or 5 minutes it's done. Thanks for the support, I appreciate it a lot
Good looking knife. I like the blade design and finish. Interesting swells at the blade end of the handle. Should provide stability on a push cut. Can't say I love the sheath. I would prefer something with a lower carry, so the handle doesn't sit so high above the belt-line. Good review. Subbed. Have a great day!
@@Pocket_EDC thanks for the support, yeah I got a pocket sheath from Lou at Delta sheaths.it is a great little EDC blade, very sharp and yes the fit and finish with the colors , Dusty is good at that
Hi, Ken over at Last Chance Knives sent me over to check out your channel. I just subbed your channel. That is a gorgeous knife. I love how the blade looks and scales color is sweet. Sheath is pretty nice. I look forward to watching more of your videos. You have a wonderful weekend.
@@jeffjackson5331 thanks so much for the support, I'm trying to get a better phone to do longer videos, cut tests stuff like that
@@SouthernKnifeLife you are very welcome. The video was excellent but i don’t blame you for wanting to get a better phone for longer videos. I don’t do content but i can understand why. My phone is basically out dated so i need a new one too. You and your family have a wonderful evening bud.
Seems like a nice knife, great video, thank you for posting
@@IKneedKnives thanks for watching and for your support 🙏
Gorgeous man!!!!!
Thank you and it is, you guys did great on this design, I already have an order for another one
@@SouthernKnifeLife love hearing that!!!
Thank you so much for making a video on this!!!❤🎉 We appreciate you!
This is only the first lol. And your welcome
That is a great looking little knife! I like the color combination. Everything that I have seen from Fiddleback Forge has always been top notch. You will love K390. It is an awesome carbon steel.
Thank you, yes sir it is beautiful, I want to do a review outside so you can really see the colors
I have the original one in orange. They are great knives! So far my favorite Rosecraft by far in the Briarpatch Jack. I love the large cigar style handle and the blades are awesome! I remember when I had 25 subscribers. A year later and it's over 1k now! Still can't believe that!
It's really unbelievable to me to have 25, hope to get a better phone with more storage so I can do cut tests and all
I carry one as my EDC . Awesome lil knife that gets overlooked.
Yessir it does and LT is good people, I used to edc a next gen in A2, did that for awhile
I better pick me up one of their blades before they triple in price. Been getting popular pretty fast.
Yeah they are very popular, this is the second run. They are nice. I have the Loosahatchie jack on the way in sandalwood I will put up when it gets here.
@SouthernKnifeLife ordered me a stag savage creek. Also eyeing up the swayback and Appalachian Jack
@@boopieboi439Ahh man those look nice, how are you liking it. get you a loosahatchie that came out in sandalwood, those are beautiful
Best edc video online
Thanks man! I think cruwear will be what I use for the most part moving forward. I’m trying some 4v now but I’m pretty sure it’ll be cruwear
I like this cruwear and the fact you treated it up at 63, and even after all that cardboard it was still sharp but a few swipes on the strop and it was back were it was, I like toothy steels some just glass out and slide rather than cut and naw they can keep them, when I get a better set up imma record my cut tests and stuff and show everything
Looks like a pretty cool knife!
I'm on a primitive bear knives kick lol
There we goooo