วีดีโอ

If only u did a black one

Hello, I have a horizon ultra, I am projecting in total darkness and as is evident in your video, time: 2.38, that the light is out of order. Can I do something about it, I mean a complaint or something like that. Or put up with it. Thanks for the advice and for the video.I have the correction turned off because it's different every time and in a different place. I can't do the calibration, it tells me whether I set both the sharpness and the correction, the control doesn't work or that I have a bad sensor, it tells me that during both calibrations.

Do I need the remote to adjust the screen height, or just the tools?

Amazing !!! Thx a lot for the information

he wont talk about the green dots that the camera cant capture but the human eyes can see very clearly on dark scenes. you cant be gaming on this, high latency and overly sharpened, high noise, this projector is the biggest scam ever - funny how Xgimi direct doesn't promote halo+ at all they have 1 generic advert on it, with the comments switched off.. very suspicious - i think this device is just a faulty Mogo pro that's been put in a new shell with some upgrades lol. its worth £250 maximum. basically every feature on this, if you want to use it, you will be punished for it so what's the point - remote issues, firmware issues, images are pixelated, don't trust camera lens, trust your own human eyes, the camera isn't capturing the rainbow effect either, simple camera tricks... but the rainbow effect on this is really bad. sometimes it just freezes, remote stops working, and now you are left with a device just gonna stay on, you have to just let the battery die out. Xgimi wanted to replace it for me but offered me the same device but a 2nd hand one lol, i paid for a brand new device, they send me a piece of junk then offer me and 2nd hand replacement that was returned by someone else??? notice how only influencers and trend followers endorse this, and Xgimi don't even have it on their own youtube page LOL check it if you think im lying!

Is there a way to adjust tension? I have wrinkles on my screen.

I just bought "VIVIDSTORM S PRO Motorized Tension Floor Rising UST ALR Projector Screen". It doesn't have the manual adjustment method but only via the remote. I wanted to increase the screen height beyond what is already set, but it mentions in manual that it is not possible. Is that correct?

What they don’t tell you is to have the image naturally fit the screen, you need an enormous room.

Do I need to keep restarting the screen to check the adjustment? Or is it adjusted in real-time while screwing with the rod?

Hello. Very cool product. Will this cabinet fit and work with the Awol 120" floor rising screen? Also what is the maximum dimensions width and depth of a soundbar that can fit on top with a projectors throw ratio of 0.25:1? I'm hoping to put a nakamichi dragon soundbar on it.

This video is indeed helpful, I am in a situation now, my bedroom center is occupied with bed and I have only left or right to place projector! Is there any projector that can avoid projecting a grey area ?

Will this work with other brands floor rising screens of a similar type and size?

thanks for the testing!

Hi, thanks for the video, the picture quality and brightness looks great. Could I buy this screen and get it delivered in France ?

Hello, if we want to completely remove the screen from the wall, is it possible to also remove the magnetic sheets ? Without damaging the wall ? Thanks already !

I’m sorry that makes zero sense to place the soundbar behind the the cabinet especially when the op was discussing a soundbar that requires no obstacles in front or to the sides of it as it’s aiming the sound directly to the listener and using side and top speakers to simulate the surround sound in the movie none of which can be accomplished by mounting any speaker where the screen would normally sit. A solution would to either build a motorized lift for the speaker that rise above the cabinet when deployed which would probably add a lot of cost and only accommodate very few speakers or soundbars. The other option would be to simply disengage the flap where the screen would rise from and just leave it permanently closed so that any speaker could just simply sit on top of the cabinet.

What weight can the back cover over the projector support? I would want to put a centre speaker on top of it.

Ajustar a altura da tela, ajuda a por mais tensao na tela?

Is it available

will adjusting the height add more tension to screen at the bottom were the black border starts?

will adjusting the screen to remove bottom black border help keep more tension on the screen ?

What height must the sound bar be to let the cabinet top draw slide under as shown in this video?

Bs view , same excate video for few over comparisons when comparing the halo

Do you ship to the USA? This seems pretty great.

This projector gets the job done pretty well. th-cam.com/users/postUgkxS9P8zTOcmQg-hH0QeUi3dspOLyYgQ6dH Bear in mind it's a mini projector but all things considered the picture quality is pretty good. The attached photo is of the projector projecting onto my white closet doors. I still have not messed with the settings but I can't wait for our first family movie night on a larger scale. If you have issues with volume not working with your firestick, go into volume settings and you will find your solution there.

Do you guy´s have a Website? I need one for my Formovie Theater 😁😁😁

We can all see the grass growing, while they still thinking when they will bring those UST cabinets onto the market.

Is this available without the motorised screen but still with the electric drawer, because i want to install a fixed ALR screen at the wall The next question is... How can my cable tv box, blueray player and the surround sound amplifier see the infrared beams with those wooden boards, is it possible to replace that with dark glas that opens sideways?

It’s a rebrand Vividstorm cabinet. Nothing less nothing more

how do i fix it ,i have used keystone but im not satisfied. i would like to get a normal setting.

مرحبا اريد ان اسألكم هل يأتي مع التلفاز جهاز استقبال ام لا و ماذا يأتي معه؟؟

Not much utility if the projector has to be in front of the screen.

did these ever make it to production and if so, how do I order one?

hello can I buy this in the UK

Does it have horizontal and vertical lens shift? Will it be enough to place it one meter to the left of the centre? On the other hand, is the keystone true that it decreases the image quality? Thank you

Is Projector allowed to move 30-40 degrees horizontally and vertically from Center? If you place the screen high closer to the ceiling, and look much lower - lying on the bed, Will the image deteriorate? Thank you.

why you showed the M2 picture unsharp? its obviously not as unsharp as its shown....

Deutscher Titel - Englischer Inhalt? Why that?

I don't hate much on the dark shadow when using keystone adjustment. But I notice the image sharpness is quite downgraded when using keystone. Such a shame when I can't place my projector right front of my wall.

Does anyone know if the Xgimi Halo is compatible with Sonos sound system ? Thanks

Was this ever released to market?

Is keystone adjustment issue on ultra short throw projectors? I had horizon pro momentarily but gave it back due to the grey area around the adjusted image. I want to try Xgimi aura

dude where to buy this furniture? do u have a scheme?)

How convenient is it to move this screen without damaging the wall?

Nice Review. A lot of testers should take a leaf out of your book

Hi...can u please help me make one like this?...thanks Sanjay

It never got released then? Did anyone find any similar alternatives?

Can you test Anker Nebula Capsule 3, please.

So ugly

Any update on how/where to order?