- 30
- 62 422
Core Auto
เข้าร่วมเมื่อ 3 เม.ย. 2024
Mechanic & Vehicle Inspection Services
Over 10 Years Of Experience
Florida 🌴
Email 📧 coreautoservicesllc@gmail.com
Over 10 Years Of Experience
Florida 🌴
Email 📧 coreautoservicesllc@gmail.com
Intake Manifold Replacement (Steps in description)
Intake manifold replacement Steps:
1- Disconnect negative battery terminal
2- Remove air intake from throttle body
3- Remove the 4 -10 mm bolts from throttle body
4- Unplug the sensors around the intake manifold
5- Remove the 12mm bolts from the manifold
7- Under the manifold there are two 12 mm bolts holding it to the bracket
8- Remove intake manifold and replace with a new one.
9- Reverse the steps to reinstall everything back together.
Done ✅
Vehicle in Video 2017 Kia Sorento
Inspection and mechanic services by Core Auto Services
Email 📧 coreautoservicesllc@gmail.com
1- Disconnect negative battery terminal
2- Remove air intake from throttle body
3- Remove the 4 -10 mm bolts from throttle body
4- Unplug the sensors around the intake manifold
5- Remove the 12mm bolts from the manifold
7- Under the manifold there are two 12 mm bolts holding it to the bracket
8- Remove intake manifold and replace with a new one.
9- Reverse the steps to reinstall everything back together.
Done ✅
Vehicle in Video 2017 Kia Sorento
Inspection and mechanic services by Core Auto Services
Email 📧 coreautoservicesllc@gmail.com
มุมมอง: 155
วีดีโอ
Airbag Clock Spring Replacement (STEPS IN DESCRIPTION)
มุมมอง 9009 หลายเดือนก่อน
Airbag Clock Spring Replacement (STEPS IN DESCRIPTION)
Rear Wheel Hub Replacement and Brakes Replacement (STEPS IN DESCRIPTION)
มุมมอง 209 หลายเดือนก่อน
Rear Wheel Hub Replacement and Brakes Replacement (STEPS IN DESCRIPTION)
Intake Manifold Runner Control Valve (STEPS IN DESCRIPTION)
มุมมอง 5210 หลายเดือนก่อน
Intake Manifold Runner Control Valve (STEPS IN DESCRIPTION)
Lower Front Engine Mount (STEPS IN DESCRIPTION)
มุมมอง 3210 หลายเดือนก่อน
Lower Front Engine Mount (STEPS IN DESCRIPTION)
Engine Mount Replacement Jeep Patriot 2.4L (STEPS IN DESCRIPTION)
มุมมอง 1.6K10 หลายเดือนก่อน
Engine Mount Replacement Jeep Patriot 2.4L (STEPS IN DESCRIPTION)
That will be a dud the customer will be back it’s a fact to just replace the intake manifold and the runner all together Why? The combustion from the manifold will just get the runner clogged again and it will get stuck I was in the same situation P2017-p2004 just do this
No need to remove the skid plates to change oil on those trucks. When filling the oil, I just grab the appropriate oil gun out of the sky!
Job got done though 💪🏼😂💜
@@Spacestoria 🔥💪🏼💯😂
Very helpful!! But we're you talking?? No sound
@@rayhef29 Thank you! And no talking is in my videos, but I write the steps I take for each video in the “description” section.
If that is a ford explorer the GDI engine is known for blowing a head gasket.. something that ford needs to address
Is this one of 4 mounts? Or is this the most likely?
how do you put it back... my won't kick all the way and i have leak warning....
@@ShtNotworking what type of car do you have?
@CoreAutoservices hi there. i have Infiniti m35. that plug was hard to get out and perfectly fitted... now it clicks, but it kind of goes back and forward.i have visors so i can look inside and it doesn't look like it can go dipper.... so, i just used a silicon around the pipe, so it can reach the seals, and we can see soon if it worked... but at least blowing the canister with air and using vacuum worked with the EVAP solenoid shorted... now it leaks....whatever... been driving with shorted solenoid for 2 years. my friend did the same and it worked so🤞
Impact now more than the ratchet
Danggg, it’s definitely a process 💪🏼
Norovirus? 😂
Blown head gasket
This is a great step by step video on how to change the clock spring on my patriot! Thank you very much!
Flood damage?
@@user-h4d2i No, it is a blown head gasket 🙏🏼
This french car ?
Not the choccy milk 😮
Cappuccino 😂
Exhaust blow😊😊😮😮
Cadillacs and the shearing header bolts 🤣 someone from factory over torques or neighbor broke heads off
Too floppy?
@@coreygunderson7485 yes, the inner tie rod has too much wear. It’s suppose to be “stiff” , not flop around. If it’s floppy it needs a replacement. If not replaced it can cause uneven wear on the tires.
On german cars you hear more thud then cranking 😂
😂💪🏼
Ngl thought hed be cursing after cracking a knuckle on the frame. Ratchet asmr is ok though
@@robertkennedy1293 😂💪🏼
🙏🏼💪🏼
💪🏼💯🔥
That’s right hand tools. Got to feel your work.
I have a question the piece with the four bolts attached to the motor mount. What is that called? Because one of my bowl is very loose and I can’t screw it back in it’s just spinning. It’s not grabbing on anything doesn’t have a nut underneath.
@@Kagenvorhees That is an engine mount bracket it is attached to the engine itself. You can buy that bracket and replace it. Since the bolt just keeps spinning the thread on it is most likely worn out. Another option you could try is getting a tap and die kit to rethread the bolt hole and the bolt itself.
They trying to charge me $250 to do this plus another $150 for the part.
Part cost around $30 dollars on Amazon. Very simple to install. I have a full video on my channel on how I replaced it.
Thankyou!!
You're welcome!
💪🏼🔥
Improper order when tightening the lug nuts.
He’s right this will save your life
Absolutely no problem with the order of tightening. The "star" pattern is not the only method of getting them on evenly.
🔥💪🏼
🔥🔥🔥
💪🏼
💪🏼
💪🏼
Awesome 👏