วีดีโอ

Its a great bang for buck case.. Havn't had too many QA issues with it.

Yeah that can happen with all cases it seems. Did you use the supplied standoffs? Sometimes even different suppliers have different sizes.

@@localtechexperts Yes, I used the ones in the box. Had to really work them. In the end it would have been easy to drill new holes out. Very weird, because the rest of the case is fine, build-quality wise. Instructions could have been better though.

I have built into this one quite a few times and yes. Have had that one a few of them unfotunately.

No case fans are either rainbow or off.

Australia have it pretty bad for case costs.

Never thought of it in that use case but you are totally right!

Oh man.. So cant remember.. But I never go less than a decent brand and rated 550w

The inbuilt fans are molex unfortunately. So full speed 100% of the time.. They are not that loud thankfully.

@thanks I’ll just buy some other fans and put those in instead

I think would be ok.. Kind of depends on how many slots your GPU takes up.

@localtechexperts asus phoenix 3060 single fan. Is the one I have. I believe it uses 2 spaces.

@localtechexperts also thank you for replying man!

@@localtechexperts i have a 3080 evga. I kinda of want to use it. But I definitely need my cam link pro to plug in.

Hi thanks for watching.. I would not suggest this case for gpus over 1.5 or 2 slot gpus.. The bottom fan clearance just isnt there and removing them would remove all intake fans.. Better off going with a more traditional style case.. Something like the ASUS A21 maybe.

umm, okay but how about the other version like cx500m or something..

Yeah but that is an ATX case so MATX motherboard in there may look a little strange..

@@localtechexperts umm okay i think i will go with cx200m coz there website mention it can fit 2.5 m gpu

If you like the look and need MATX with a little more clearance maybe check out the Thermaltake View 170.. I have a video on that one too.

I've managed to work out the buttons and dials a little better since then thankfully.

Just how I like it. Though getting the itch for an itx build or two in the future.

Set as exhaust

Yes fits standard ATX power supply

Theres one on the top.. cant remember if there is one on the side

Hrm possible I guess. If thats what they were going for they failed miserably. I may get a black one and double check and report back if it has th same markings on it.

@ for sure either way I love the case.

Yeah I will be using it for builds for sure.. Only one video per case though.

Just finished building into two more.. 1 White 1 black and yep they both have the same marking so its apparently on purpose.

Costed somewhere around the $600-$700 AUD mark to put together I would say.

Thank you. I try look at it from a builders perspective rather than a marketers one.

Yeah really is a beginner friendly case.

Yeah they just sell better. Hopefully the trend of white starts to fade out. I do like a classic black out build for myself personally though.

​@@localtechexpertsThats interesting, I sell a few builds over here in Brisbane but I've never tried a white case because the other parts are harder to find in white. Might have to give it a shot with some black components though

Yeah works out ok.. Finding the extra white parts is a pain but just the case is ok.

Check timestamp 3:40 Shows the ARGB controller included with this one.. It connects to there. Not sure about the 511 but would assume it should come with one too.

Yeah its the MATX version of the 270

Yes it does

Yeah they were kind of popular for a second there but kind of dropped off.

Hrm.. If that card is 2.5 slot it may have clearance issues with the bottom fans.

@@localtechexperts thanks for the response, yea I figured. Ended up finding an affordable case with good clearance tho! Thanks again, subscribed for the informative responses :)

Yes

These fishtank cases are not actually that great for airflow. Mesh sided ones are better.

Hrm.. Cant recall sorry.

Yeah I tend to get some really disgusting ones.

Dont have this one to measure anymore.. If the specs say it will fit a 155mm cooler then I have to reason to think otherwise.

That looks like an ATX motherboard.. These cases only fit MATX motherboards. So you would have to find a different motherboard... The GTX1660 is fine though. I have done a bunch of builds into this case with that GPU.

@@localtechexperts oh ok thanks, Also Im planning on upgrading my 15 yr old cpu i5 760 to the upcoming core ultra 7, do you think an asus strix z890 would be the good choice?

Couldn't say for sure until release.. Particularly the cost to performance ratio.. Also Asus have been getting dragged through the mud recently for poor customer service in relation to warranty returns.

Yeah jonsbo tend to hide them up front. Just leave the psu turned on.. Not sure how that would effect with traveling?

This case is for ITX motherboards not MATX. Also it's kind of centered around aio cooling for the cpu.. If a 120mm AIO is within budget would certainly go with one of those.

@@localtechexperts mini mother board?

Yes this case only fits ITX motherboards.. Not MATX or ATX.

@@localtechexperts thanks I change it in my list

Yeah I noticed that post filming unfortunately. Dont think mesh in the bottom would actually help that much because the ventilation on the sides.

Whoops sorry.. I promise they are friendly ;)

Like the case fans? Are they all plugged into the fan headers?

@@localtechexpertsyes they are all pluged in

Not just the ARGB but the actual PWM cables too? they have two cables per fan. It would be weird for all the fans to be dead at once.. It includes a splitter so maybe bypass that for testing each fan.

You are very kind. Thankyou

Glad it was helpful!

The bottom fans can be removed.. Just may have to also check the length because this is my no means a long case either

@@localtechexperts Thank you for your response. i am using the same mainboard msi b650m gaming wifi, and the rtx is around 59mm heigh and 307 mm length. do you think it can fit in well?

The specs say 330mm for length of GPU so should be ok.

No you want the View 270 for ATX size.

Thanks for the visit

I couldn't agree more :P

They dont include a splitter but the fans are daisy chainable together so you wont need one.

@@localtechexperts ah ok thanks

No not really.. Its a solid little budget case despite the price

Fans in the bottom as intakes.

Yeah really would think there are processes and checklists for testing. Not sure whats going either stressed staff trying to close tickets or what.

Yeah the fans are actually molex run full on all the time and the volume of the case is quite small already.

My pleasure 😊

Think you should be able to stuff one of those in there..