วีดีโอ

Is this a joke? The first thing that's wrong is it's a toy.

Lmao.. you're killing me TankTop

Just started going through my bike, after I got all the parts for the reefs servo and Sullivan cable a and steering servo the treal servo saver. I'm not going to sugarcoat any of this shit either, I'm going to race it and beat the shit out of it and we'll do an actual racer review. Thank you Roboeye for all the tips and tricks

What tires are those

You literally said a whole lot of nothing bro

To the person that asked about buying some of the 3D printed products eBay to Bert innovation on the search bar and then ask him what he can make for you on his side my other guys will not ship anything so if you live in the LA County area of the US you can come down and pick up anything you need on Saturday or Sunday at Valley Flyers in the San Fernando Valley which is Valley Flyers cam

I'm not sure what language you speak so you will have to do a translation through TH-cam do you understand my video

It's my understanding everybody's trying to figure out the front spring for the caliper of the cable setup you will have to get a throttle return spring from one of your nitro cars or order one online and put it in there if you cannot find it that way then you need to go on to Amazon or AliExpress to get a 3 mm or 2 mm spring only and usually you can get an assortment pack different sizes you will cut it to the tension you want and you'll be set to go that should help you guys out

uuuuuum uuuuum uuuuuum nkay🙄

Very cool I appreciate your reply back you're a very respectful person keep watching my channel

Vht and suger water ? How

You always educating me

I’d really like to purchase some 3-D prints from you I don’t know how I would get in contact with you to do such a thing but if you could let me know I’m really itching to grab a few parts from you

You can purchase the master link at McMaster-Carr you can order online or you can call them you're going to need to measure out the length and the width of the link

I replaced the swingarm with the long swingarm from and lost the master link, where could I purchase a replacement? Promoto talk

Thank you very much you're a great guy great messages what's much respect you're number one on my list my friend

Racer X you did it again. Slam dunk I can’t wait to see what you’ve done with the Promoto

I just ordered some of those GRP tyres, can’t wait for them to get here. I would have never known about them

Front fender is nice

Also I love the new rc9

Can you make your headlights and tail lights work?

Would have been nice to see it on the bike .

This guy is the best!

Thank you for putting out the video I was going to buy one of these but since you mentioned all that stuff I don't believe it's worth it for the money that you have to pay for the goddamn thing!!!!! FXXX losi

Thank you it was very tough to find this writer for the price I found it for and to even find it

Check out my rider on my page

The bike 🏍️ and rider look great

This is Racer X just to let you guys know you cannot take out just one link out of a chain you always have to take out two links because you need the inside link for your master link that has been the rule of thumb since motorcycles were invented so don't think you can make your chain Tighter by pulling just one link just a bit of advice

If you take one link out of the sprocket it will push the measurement ruler all the way to the front so you have too much adjustment if you measure off one length to the ruler in the back swing arm you will see the link is longer then the ruler adjustment which means you have way too much with the block pushed all the way forward that's what I was trying to say in my video with a 372 sprocket it will put this ruler for this swing arm in the middle hopefully you guys understand what I'm saying it's not about the speed it's about the adjustment and yes on a dirt bike you want more torque not speed

Just take a link out lol

What else....oh ya the guy doesn't do Nac Nacs over jumps. Google it.

I know you say they don’t need them, but I would still love to see a front and rear fender

This bike is so sick❤❤❤

If he went with the smaller sprocket, he would have to remove a few links in the chain. Hopefully it would still fit.

Larger rear sprocket is less speed more torque.

I’d love to see the 3-D print of a two-stroke pipe

Also, I love all of your content racer X

The smaller sprocket 32t would give u more speed. I think 😂

No shipping?

Sometimes when you record on TH-cam they mess up a little bit on The Voice and the meanings in The Voice yes yes I am 7 time US champion for the past 23 years I raised1/5 for 24 years and Motocross for the same amount of time have not raced the Losi 1/4 scale yet professionally I'm still doing development for the project and the bike three dark metal racing

I thought I heard you say you used to race MX. I'm curious where you raced. I'm from PNW. I've been from north Washington to lake Elsinore and all between. Have Fun

The rear fender is the one we all need bc those things snap super easy. About to find someone who can machine an aluminum one at this point.

Have you had an issue where the bikes gyro-based steering. (lean bike right, wheel should turn left to keep the bike upright) needs to be reversed? I cannot figure out how to rebind and recalibrate the transmitter and receiver to be the correct direction.

As a new Promoto owner i thnak you for the video but no links to the chest, elbow or knee protectors? Want to buy but where do i buy?

The pushrod PN should be SUL507 The cam PN should be LOS261013 Will have to confirm when I try this for myself

We do not as I said in my video ship out to other states or countries if you live near the LA area in California or in La you can come to our club on Saturday or Sunday of every weekend to place an order or purchase our products thanks

I would love to order 3d printed, or metal rear fenders. I keep breaking them off!

I missed the swap meet but how can i purchase the stander brake disc cover in black from you? im located not too far in Agua Dulce, CA

No vitamin is not finished yet they also just released three new sprockets for the bike with different gearing check into it on their website

I refresh the Vitavon, GPM and Treal pages everyday just to see if they have added any new upgrades. Good to hear that Vitavon is not finished yet.