วีดีโอ

Thank you it did turn out really nice and it lets a lovely bit of light through the slatted part, glad to say the customer was extremely pleased with it. I did make 2 of them in the end but the customer only wanted the one, so if you’re interested there is another one for sale 😉☺️. Thanks for the lovely comment

Merry Christmas thanks there’s some interesting ones to come, if you press the bell you’ll get notifications too. Thanks for subscribing

Hi glad you enjoyed the video, if I was only making one then yeah it would be easier to just stick it on the wood being cut, however I’ve been making multiples of these so it’s easier to make reusable templates

Hi glad you enjoyed it and found it informative and yeah it is a long process it’s more how I do things I’m sure there’s some woodworkers out there that have a simpler way of doing but just wanted to show how I do it, if it took any longer it may have all grown back lol. Yeah sorry forgot to add that in yes it’s chopsdesigns you can find him on instagram, thanks again 👍🏻

Hi bud it’s just a bolt I got from a hardware shop I’ll see if I can add a pic of one for you

I had a look at the bolt and it’s an m10 x 120 that I used so something like that would work

Cheers Marty definitely has turned into a fave of mine to do as they are simple (apart from the sanding lol) I’ve got a couple of different templates that I’m working with at the mo so depending on how they turn out it may make it to TH-cam. I’ve still got my scroll saw but been finding I’m using the bandsaw a lot more so far it’s a very versatile tool, all I’d say is watch your fingers I’ve almost had them a couple of times lol. Thanks for the very kind comments and I’m glad your enjoying the channel keep well and hope you enjoy the holidays too 👍🏻

Thank you they really have gone down very well with everyone. I find there’s enough space it is tight though. You can go smaller but then you have to clean out some of the inside as it shows in the centre of the opener so there’s that bit more work, if you were concerned about the screws I’ve been experimenting with using just a resin or an epoxy to stick them in that works well. Glad you’ve enjoyed the video 👍🏻

Thanks for the comment Marty glad your still enjoying the videos and that your doing well. Cutoffs is a good word for them as there not really scrap 👍🏻 I’ve got a lot more to use but I’ve got plans for those hope to make a video for that too. That’s quite a journey your on is it for work? Would be good to see some of your projects. Thanks again Marty 👍🏻

@@Shedcreations80 Yes sir, I am a truck driver so I ramble around the country often. In Arizona now but hope to be home to Minnesota in a few days and get some shop time. Again great video and I enjoy your channel.🙂

I thought you maybe something like that I used to drive lorry’s not to the same extent as you are though, safe travels bud 👍🏻

Hi yeah it’s a good idea maybe not the safest lol but definitely save a good amount of time. once I’ve drilled the hole for where the bottle top would go I then put a bolt through the metal opener bit with a washer and nut tighten it up then screw that metal opener bit to the wooden part, then put the bolt in the drill press and that’s it away you go. Hopefully that’s clear for you bud if not I’ll try do a short or something for one to show how I do it. Thanks for the comment and glad your enjoying the vids 👍🏻

Ah, I get it now I missed the fact you were using the actual metal opener at the end of the bolt. (Should’ve gone to specsavers eh?) I guess I could move the opener around a bit to not use the same holes when it comes to putting it back together. Thanks, all the best with your channel I’m enjoying it.

lol it’s ok I could’ve made it a bit clearer maybe 🤔 I find that using the same holes is ok but yeah moving them round would work or another thing I’ve done is either use some glue just on the tip of the screw so as you put it in it works round the thread or some epoxy would work good luck with how ever you do them fella. Glad your enjoying the channel 👍🏻

Thanks it’s a 12v erbauer impact driver can pick them up fairly cheaply I think there a good buy and I’ve had no issues with it

I’m in love 😍 with my table and yes… whilst i may be a lil bias (he’s my bruv) but saying that I’m very hard customer to please so he knew the risks 🤣😊😍 Thanks Bruv

I’m really happy that you like it so much I look forward to seeing it once you’ve got your chairs and everything you’ll got to decorate it lol. Your very welcome sis ☺️❤️ x

Thanks bud yeah they seem to sell well. The oak ends up around one inch thick and the depth is about 3/4 inch deep I do vary this a bit as depends on the thickness of the material

This was definitely a fun one for me because even though the customer had a design that they wanted they let me have some freedom with how I interpreted it, I was really happy with the customers reaction to it really made my day. Have a greats day Marty 👍🏻

Thank you Marty, I really like using danish oil especially on sapele which so far has got to be one of my favourite woods however saying that this wenge has some amazing pattern to it so will definitely be looking for more of it to work with. Hope you have a great day too Marty and thanks again for the comments 👍🏻

Hi Marty thank you so much. Yeah I do have a scroll saw but for the size of timber I’ve used so far I don’t get much waste from doing it the way I do and the sanding technique is something i found someone else doing and I thought genius lol, I’ve contemplated making them thinner also some with a hole all the way through but not done those yet. Again i really appreciate your comments and I am glad your enjoying the content, I’ve not put anything else up yet as life has been hectic so not had the time but I’ve got some things in the pipeline that will be up soon. I hope you carry on enjoying the videos and thanks for the sub 👍🏻

Thanks bud. I did when I first started doing them but I find you just go slow then there ok

That’s a cool idea Brad unfortunately I work primarily out of wood but I’ll have a look into how I could incorporate something like that. Thanks for the idea 👍🏻

@@Shedcreations80 make a tea pot 🤣

That’s on the list trying to come up with making a wooden teapot lol

Sorry he’s not up for grabs but if you try guessing his name you could win something else 🤔

Good guess but not right unfortunately

Thanks I always appreciate the feedback. I do think I prefer the chamfered ones but saying that the round over ones do sit nice in the hand 👍🏻

Thank you I’m really pleased with them

Hi these are £65 plus postage 👍🏻

You can always contact me via my instagram instagram.com/thats_nice_steve_80 cheers fella

Yes absolutely I can. You can message me directly and we can discuss what you’d like 👍🏻

Thank you 👍🏻

That’s a good suggestion I’ll have a look into some styles see what I can come up with 👍🏻

Thanks I’m super happy with these I’ve got them on the website for sale too as with most of the items I’ve made 👍🏻😉

Thank you I’m really pleased with how it turned out and fits the spot perfectly

Thanks always learning how to do things differently glad to see it’s improving the videos ☺️

Cheers bud, there’s more to come lol 😉

Thanks I’ve been told it’s crotch walnut now. Either way I’m excited to work with it

Thanks always looking for pointers 👍🏻

??

Thank you everyone who has one loves them

Hi 👋🏻

Hmm yeah if only there was someone who bottles wine 🤔🤣

@@Shedcreations80 🤫🤔🤫🤔🥂🍷🍾

May have to collaborate you do the wine I’ll do the holders 🤔

@@Shedcreations80 sounds like a plan to me

Thank you for the kind comment glad you like the board. Hopefully we can help with items in the future

I'll second you to that. I use it daily and thankyou for the wax to keep it intact! Best of luck!