วีดีโอ

Yes, that is where I wound up keeping it. I didn't like it there, but I honestly couldn't find an alternative so it could be upright like the instructions called for. I haven't had that bike for a while so I can't speak to longevity for that position though.

Wayne sure would love to ask you a few ???? I'm trying to install one on my 1998 Valkyrie GL1500CT.

@@pauljohns4332 No Problem Paul. Mine was a 1998 Tourer as well. All the wiring was contained in the headlight and I positioned the actual little brain box just forward of the gas tank and zip tied to the frame behind a small plastic cover there. All the wires I needed to splice into were inside the headlight. Made for a clean, out of sight install. It was a much easier install than the F6B. Hope that helps but if you have other questions ask away. Cheers.

I have now installed the Smart Turn System on my 2015 F6B and it works great. This is a great product that I would highly recommend.

Yes...it works perfectly. The only two things, as I mentioned in the video, are that (1) I spliced into the wiring too close to the handlebars and should've planned that better and (2) it took a little while before I realized that manually canceling them was a different thing than pressing centrally, instead, you have to push/pull in the same direction to cancel. So if you push right to turn right, you have to push right again to cancel that manually (or wait 11 blinks or whatever it is via the Smart Turn Setup). BUt the auto-cancel works flawlessly on any turn I tried, even the slightest sweeper.

I do not recall that but I had a tester that had a really sharp point that I could poke through the sheathing of the wires without having to cut into them. It was a lifesaver and through some process of elimination, I was able to figure it out.

@@bctaberahFYI - I tracked down a wiring diagram and the STS should splice into the solid colored lt blue, orange, and grey...as you did. The lt blue and orange wires with the white stripe are the running lights ...a possible switched power source for the STS as they are only powered in acc or on mode.

Final update for any DIYer. The orange wire with white stripe is not a good power source. I ended up running power and ground wires off of the USB outlet wiring I had installed in left cubby hole in fairing. All done and works perfectly.